Sunberry

Sunberry provides local Homey integration for the Sunberry module used with SolidSun photovoltaic installations, including GoodWe ET inverter based systems. Version 3 is a breaking change. The old all-in-one Sunberry device must be removed and replaced with the new split devices: Sunberry Battery, Sunberry Solar, Sunberry Home Consumption and Sunberry Smart Meter. Optional Sunberry Smart Contact, Sunberry Boiler 1F and Sunberry Boiler 3F devices can be added when those features are enabled by the installer in the Sunberry portal. The Battery device reports battery state, stored energy, charge/discharge power, estimated charged/discharged kWh, temperature, and controls for force charging and blocking discharge. The Solar device reports PV1/PV2 production and estimated generated kWh. Home Consumption reports GRID and BACKUP phase loads as telemetry only, while Smart Meter estimates the net grid import/export for Homey Energy from house load, solar production and battery power. Smart Contact reports contact state and can activate a full-week timer in the selected Sunberry mode. Boiler 1F and Boiler 3F report heater power, estimated kWh, optional water temperature, and can activate a full-week timer with or without Power Routing. Most cumulative kWh values are estimated from current W values and the polling interval because the Sunberry portal does not expose billing-grade cumulative meters for those roles. If data polling or control requests fail, set the real Sunberry IP address in each device settings instead of relying on sunberry.local.