Alarm input
Der Kontakt-Alarm ist angegangen
Hikvision NVR & DVR
Every camera. One recorder. Full control.
Connect a Hikvision recorder, IP camera or doorbell to Homey the way a security system should work: every channel behind your DVR or NVR shows up on its own, live video plays right inside the Homey app, and a camera or doorbell event can trigger a Flow the moment it happens, with a snapshot attached.
Unlike most camera integrations, this app understands recorders: it enumerates every analog and IP channel automatically, so you're never adding devices by hand one camera at a time. It finds recorders and cameras on your network on its own, and recovers on its own if a device's IP address changes.
Getting started: add your recorder first, then choose Camera via recorder to add its cameras. Use Standalone IP camera only for a camera that is not connected to a recorder.
Unterstützte Geräte
Flow-Karten
Klicke oben auf ein Gerät, um nur verwandte Flow-Karten anzuzeigen.
Wenn ...
Alarm input
Der Kontakt-Alarm ist ausgegangen
Alarm output
Angeschaltet
Alarm output
Ausgeschaltet
Camera via recorder
Der Bewegungs-Alarm ist angegangen
Camera via recorder
Der Bewegungs-Alarm ist ausgegangen
Camera via recorder
Der Sabotage-Alarm ist angegangen
Camera via recorder
Der Sabotage-Alarm ist ausgegangen
Camera via recorder
Der allgemeine Alarm ist angegangen
Camera via recorder
Der allgemeine Alarm ist ausgegangen
Camera via recorder
Any event occurred on [[device]]
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera via recorder
Intrusion stopped
Camera via recorder
Intrusion started
Camera via recorder
Line crossing stopped
Camera via recorder
Line crossing started
Camera via recorder
Region entry or exit stopped
Camera via recorder
Region entry or exit started
Doorbell
Der Bewegungs-Alarm ist angegangen
Doorbell
Der Bewegungs-Alarm ist ausgegangen
Doorbell
Der allgemeine Alarm ist angegangen
Doorbell
Der allgemeine Alarm ist ausgegangen
Doorbell
The doorbell button on [[device]] was pressed
Recorder
Der allgemeine Alarm ist angegangen
Recorder
Der allgemeine Alarm ist ausgegangen
Recorder
Was disarmed
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
Fires when detection is switched back on for every channel through this app.
Recorder
[[device]] is not reachable
Fires when the recorder has been unreachable for a few minutes, or when its login is rejected.
Recorder
[[device]] is reachable again
Fires when a recorder that was unreachable responds again. "Offline since" tells you when it went away.
Standalone IP camera
Der Bewegungs-Alarm ist angegangen
Standalone IP camera
Der Bewegungs-Alarm ist ausgegangen
Standalone IP camera
Der Sabotage-Alarm ist angegangen
Standalone IP camera
Der Sabotage-Alarm ist ausgegangen
Standalone IP camera
Der allgemeine Alarm ist angegangen
Standalone IP camera
Der allgemeine Alarm ist ausgegangen
Standalone IP camera
Intrusion stopped
Standalone IP camera
Intrusion started
Standalone IP camera
Line crossing stopped
Standalone IP camera
Line crossing started
Standalone IP camera
Region entry or exit stopped
Standalone IP camera
Region entry or exit started
Und ...
Alarm input
Der Kontakt-Alarm ist an
Alarm output
Ist an
Camera via recorder
Der Bewegungs-Alarm ist an
Camera via recorder
Der Sabotage-Alarm ist an
Camera via recorder
Der allgemeine Alarm ist an
Camera via recorder
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera via recorder
Intrusion is active
Camera via recorder
Line crossing is active
Camera via recorder
Region entry or exit is active
Doorbell
Der Bewegungs-Alarm ist an
Doorbell
Der allgemeine Alarm ist an
Doorbell
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Recorder
Der allgemeine Alarm ist an
Recorder
Hard disk is healthy
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.
Standalone IP camera
Der Bewegungs-Alarm ist an
Standalone IP camera
Der Sabotage-Alarm ist an
Standalone IP camera
Der allgemeine Alarm ist an
Standalone IP camera
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Standalone IP camera
Intrusion is active
Standalone IP camera
Line crossing is active
Standalone IP camera
Region entry or exit is active
Dann ...
Alarm output
Einschalten
Alarm output
Ausschalten
Alarm output
Ein- oder ausschalten
Alarm output
Pulse for Duration ms
Camera via recorder
Post Event type state Event state to Webhook URL
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera via recorder
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Camera via recorder
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Camera via recorder
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera via recorder
Take a snapshot with [[device]]
Advanced
Doorbell
Take a snapshot with [[device]]
Advanced
Recorder
Arm detection
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.
Standalone IP camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Standalone IP camera
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Standalone IP camera
Take a snapshot with [[device]]
Advanced
Support
Der Entwickler dieser App bietet keinen direkten Support an.
Was ist neu?
Version 5.0.1 — Pictures from a recorder keep the camera's own shape (16:9) instead of being stretched square.
Hikvision NVR & DVR
Hikvision NVR & DVR ist mit dem gewählten Homey nicht kompatibel.
Hikvision NVR & DVR wird in Kürze auf Homey installiert.
Changelog
Wir werden Wisse Koelman ein Dankeschön schicken!
Wir lassen Wisse Koelman wissen, dass du die App magst. Vielleicht erwägst du, Wisse Koelman durch eine Spende zu unterstützen?
Spende an Wisse Koelman
Der Entwickler von Hikvision NVR & DVR akzeptiert Spenden.
Spende etwas, um Danke zu sagen!
Dein Vorschlag wurde gesendet
Wir werden Wisse Koelman benachrichtigen, dass du einen Vorschlag gesendet hast.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
