Alarm input
열림 감지 열리면
Hikvision NVR & DVR
Every camera. One recorder. Full control.
Connect a Hikvision recorder, IP camera or doorbell to Homey the way a security system should work: every channel behind your DVR or NVR shows up on its own, live video plays right inside the Homey app, and a camera or doorbell event can trigger a Flow the moment it happens, with a snapshot attached.
Unlike most camera integrations, this app understands recorders: it enumerates every analog and IP channel automatically, so you're never adding devices by hand one camera at a time. It finds recorders and cameras on your network on its own, and recovers on its own if a device's IP address changes.
Getting started: add your recorder first, then choose Camera via recorder to add its cameras. Use Standalone IP camera only for a camera that is not connected to a recorder.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
Alarm input
열림 감지 닫히면
Alarm output
켜지면
Alarm output
꺼지면
Camera via recorder
움직임이 감지되면
Camera via recorder
움직임이 없으면
Camera via recorder
변화가 감지되면
Camera via recorder
변화 감지가 정상 상태이면
Camera via recorder
알람이 켜지면
Camera via recorder
알람이 꺼지면
Camera via recorder
Any event occurred on [[device]]
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera via recorder
Intrusion stopped
Camera via recorder
Intrusion started
Camera via recorder
Line crossing stopped
Camera via recorder
Line crossing started
Camera via recorder
Region entry or exit stopped
Camera via recorder
Region entry or exit started
Doorbell
움직임이 감지되면
Doorbell
움직임이 없으면
Doorbell
알람이 켜지면
Doorbell
알람이 꺼지면
Doorbell
The doorbell button on [[device]] was pressed
Recorder
알람이 켜지면
Recorder
알람이 꺼지면
Recorder
Was disarmed
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
Fires when detection is switched back on for every channel through this app.
Recorder
[[device]] is not reachable
Fires when the recorder has been unreachable for a few minutes, or when its login is rejected.
Recorder
[[device]] is reachable again
Fires when a recorder that was unreachable responds again. "Offline since" tells you when it went away.
Standalone IP camera
움직임이 감지되면
Standalone IP camera
움직임이 없으면
Standalone IP camera
변화가 감지되면
Standalone IP camera
변화 감지가 정상 상태이면
Standalone IP camera
알람이 켜지면
Standalone IP camera
알람이 꺼지면
Standalone IP camera
Intrusion stopped
Standalone IP camera
Intrusion started
Standalone IP camera
Line crossing stopped
Standalone IP camera
Line crossing started
Standalone IP camera
Region entry or exit stopped
Standalone IP camera
Region entry or exit started
그리고...
Alarm input
열림 감지 열리면
Alarm output
켜지면
Camera via recorder
움직임이 감지되면
Camera via recorder
변화가 감지되면
Camera via recorder
알람이 켜지면
Camera via recorder
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera via recorder
Intrusion is active
Camera via recorder
Line crossing is active
Camera via recorder
Region entry or exit is active
Doorbell
움직임이 감지되면
Doorbell
알람이 켜지면
Doorbell
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Recorder
알람이 켜지면
Recorder
Hard disk is healthy
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.
Standalone IP camera
움직임이 감지되면
Standalone IP camera
변화가 감지되면
Standalone IP camera
알람이 켜지면
Standalone IP camera
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Standalone IP camera
Intrusion is active
Standalone IP camera
Line crossing is active
Standalone IP camera
Region entry or exit is active
그러면...
Alarm output
켜기
Alarm output
끄기
Alarm output
켬/끔 상태 전환하기
Alarm output
Pulse for Duration ms
Camera via recorder
Post Event type state Event state to Webhook URL
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera via recorder
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Camera via recorder
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Camera via recorder
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera via recorder
Take a snapshot with [[device]]
Advanced
Doorbell
Take a snapshot with [[device]]
Advanced
Recorder
Arm detection
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.
Standalone IP camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Standalone IP camera
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Standalone IP camera
Take a snapshot with [[device]]
Advanced
지원
이 앱의 개발자는 직접 지원을 제공하지 않습니다.
새로운 기능
버전 5.0.1 — Pictures from a recorder keep the camera's own shape (16:9) instead of being stretched square.
Hikvision NVR & DVR
선택하신 Homey에 Hikvision NVR & DVR이(가) 호환되지 않습니다.
Hikvision NVR & DVR이(가) 곧 Homey에 설치됩니다.
업데이트 로그
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
