Hikvision NVR & DVR

Every camera. One recorder. Full control.
Every camera. One recorder. Full control.

Read more ›

Supported devices

Flow cards

Click on a device above to show related Flow cards only.

When...

Alarm input
The contact alarm turned on
Alarm input
The contact alarm turned off
Alarm output
Turned on
Alarm output
Turned off
Camera via recorder
The motion alarm turned on
Camera via recorder
The motion alarm turned off
Camera via recorder
The tamper alarm turned on
Camera via recorder
The tamper alarm turned off
Camera via recorder
The generic alarm turned on
Camera via recorder
The generic alarm turned off
Camera via recorder
Turned on
Camera via recorder
Turned off
Camera via recorder
Any event occurred on [[device]]
i
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera via recorder
Intrusion stopped
Camera via recorder
Intrusion started
Camera via recorder
Line crossing stopped
Camera via recorder
Line crossing started
Camera via recorder
Region entry or exit stopped
Camera via recorder
Region entry or exit started
Doorbell
The motion alarm turned on
Doorbell
The motion alarm turned off
Doorbell
The generic alarm turned on
Doorbell
The generic alarm turned off
Doorbell
The doorbell button on [[device]] was pressed
Recorder
The generic alarm turned on
Recorder
The generic alarm turned off
Recorder
Was disarmed
i
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
i
Fires when detection is switched back on for every channel through this app.
Standalone IP camera
The motion alarm turned on
Standalone IP camera
The motion alarm turned off
Standalone IP camera
The tamper alarm turned on
Standalone IP camera
The tamper alarm turned off
Standalone IP camera
The generic alarm turned on
Standalone IP camera
The generic alarm turned off
Standalone IP camera
Intrusion stopped
Standalone IP camera
Intrusion started
Standalone IP camera
Line crossing stopped
Standalone IP camera
Line crossing started
Standalone IP camera
Region entry or exit stopped
Standalone IP camera
Region entry or exit started

And...

Alarm input
The contact alarm is on
Alarm output
Is turned on
Camera via recorder
The motion alarm is on
Camera via recorder
The tamper alarm is on
Camera via recorder
The generic alarm is on
Camera via recorder
Is turned on
Camera via recorder
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera via recorder
Intrusion is active
Camera via recorder
Line crossing is active
Camera via recorder
Region entry or exit is active
Doorbell
The motion alarm is on
Doorbell
The generic alarm is on
Doorbell
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
Recorder
The generic alarm is on
Recorder
Hard disk is healthy
i
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
i
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.
Standalone IP camera
The motion alarm is on
Standalone IP camera
The tamper alarm is on
Standalone IP camera
The generic alarm is on
Standalone IP camera
Motion detection is on
i
Checks the motion detection setting on the device itself at the moment the Flow runs.
Standalone IP camera
Intrusion is active
Standalone IP camera
Line crossing is active
Standalone IP camera
Region entry or exit is active

Then...

Alarm output
Turn on
Alarm output
Turn off
Alarm output
Toggle on or off
Alarm output
Pulse for Duration ms
Camera via recorder
Turn on
Camera via recorder
Turn off
Camera via recorder
Toggle on or off
Camera via recorder
Post Event type state Event state to Webhook URL
i
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera via recorder
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
i
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera via recorder
Take a snapshot with [[device]]
Advanced
Recorder
Arm detection
i
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
i
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.
Standalone IP camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
i
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Standalone IP camera
Go to preset Preset number
i
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.

Support

The developer of this app does not offer direct support.

What’s new

Version 3.0.1 — You can now support the development of this app with a donation through PayPal, from the app's page in the Homey App Store.

View changelog

Hikvision NVR & DVR

Hikvision NVR & DVR is not compatible with the selected Homey.

Hikvision NVR & DVR will install on Homey shortly.
Install App