Alarm input
La alarma de contacto se ha activado
Hikvision NVR & DVR
Every camera. One recorder. Full control.
Connect a Hikvision recorder, IP camera or doorbell to Homey the way a security system should work: every channel behind your DVR or NVR shows up on its own, live video plays right inside the Homey app, and a camera or doorbell event can trigger a Flow the moment it happens, with a snapshot attached.
Unlike most camera integrations, this app understands recorders: it enumerates every analog and IP channel automatically, so you're never adding devices by hand one camera at a time. It finds recorders and cameras on your network on its own, and recovers on its own if a device's IP address changes.
Getting started: add your recorder first, then choose Camera via recorder to add its cameras. Use Standalone IP camera only for a camera that is not connected to a recorder.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
Alarm input
La alarma de contacto se ha desactivado
Alarm output
Encendido
Alarm output
Apagado
Camera via recorder
La alarma de movimiento se ha activado
Camera via recorder
La alarma de movimiento se ha desactivado
Camera via recorder
La alarma de manipulación se ha activado
Camera via recorder
La alarma de manipulación se ha desactivado
Camera via recorder
La alarma general se ha activado
Camera via recorder
La alarma general se ha desactivado
Camera via recorder
Encendido
Camera via recorder
Apagado
Camera via recorder
Any event occurred on [[device]]
Fires for every event, known or unknown — useful for events this app doesn't have a dedicated trigger for yet.
Camera via recorder
Intrusion stopped
Camera via recorder
Intrusion started
Camera via recorder
Line crossing stopped
Camera via recorder
Line crossing started
Camera via recorder
Region entry or exit stopped
Camera via recorder
Region entry or exit started
Doorbell
La alarma de movimiento se ha activado
Doorbell
La alarma de movimiento se ha desactivado
Doorbell
La alarma general se ha activado
Doorbell
La alarma general se ha desactivado
Doorbell
The doorbell button on [[device]] was pressed
Recorder
La alarma general se ha activado
Recorder
La alarma general se ha desactivado
Recorder
Was disarmed
Fires when detection is switched off for every channel through this app.
Recorder
Was armed
Fires when detection is switched back on for every channel through this app.
Standalone IP camera
La alarma de movimiento se ha activado
Standalone IP camera
La alarma de movimiento se ha desactivado
Standalone IP camera
La alarma de manipulación se ha activado
Standalone IP camera
La alarma de manipulación se ha desactivado
Standalone IP camera
La alarma general se ha activado
Standalone IP camera
La alarma general se ha desactivado
Standalone IP camera
Intrusion stopped
Standalone IP camera
Intrusion started
Standalone IP camera
Line crossing stopped
Standalone IP camera
Line crossing started
Standalone IP camera
Region entry or exit stopped
Standalone IP camera
Region entry or exit started
Y...
Alarm input
La alarma de contacto está activada
Alarm output
Está encendido
Camera via recorder
La alarma de movimiento está activada
Camera via recorder
La alarma de manipulación está activada
Camera via recorder
La alarma general está activada
Camera via recorder
Está encendido
Camera via recorder
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Camera via recorder
Intrusion is active
Camera via recorder
Line crossing is active
Camera via recorder
Region entry or exit is active
Doorbell
La alarma de movimiento está activada
Doorbell
La alarma general está activada
Doorbell
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Recorder
La alarma general está activada
Recorder
Hard disk is healthy
Healthy means the recorder reports its hard disk status as OK. The status is checked every minute.
Recorder
Is armed
Disarmed means detection was turned off on every channel with the Disarm action or the Armed switch of this app.
Standalone IP camera
La alarma de movimiento está activada
Standalone IP camera
La alarma de manipulación está activada
Standalone IP camera
La alarma general está activada
Standalone IP camera
Motion detection is on
Checks the motion detection setting on the device itself at the moment the Flow runs.
Standalone IP camera
Intrusion is active
Standalone IP camera
Line crossing is active
Standalone IP camera
Region entry or exit is active
Entonces...
Alarm output
Encender
Alarm output
Apagar
Alarm output
Encender o apagar
Alarm output
Pulse for Duration ms
Camera via recorder
Encender
Camera via recorder
Apagar
Camera via recorder
Encender o apagar
Camera via recorder
Post Event type state Event state to Webhook URL
Posts a small JSON payload (device, channel, event type, state, timestamp) — never credentials. 10s timeout, no retries; a failure shows as a Flow error.
Camera via recorder
Set brightness to Brightness, contrast to Contrast and saturation to Saturation
Values match the recorder's own web UI scale (0-255, 128 is the typical default).
Camera via recorder
Take a snapshot with [[device]]
Advanced
Recorder
Arm detection
Switches detection back on for every channel, restoring exactly the settings each channel had before it was disarmed.
Recorder
Disarm detection
Switches detection off on every channel and remembers each channel's exact settings, so Arm detection can restore them later.
Standalone IP camera
Pan Pan, tilt Tilt, zoom Zoom for Duration ms
Only works on cameras that report PTZ support — most fixed cameras and analog DVR channels don't have this.
Standalone IP camera
Go to preset Preset number
Only works on cameras that report PTZ support, with the preset already saved on the camera itself.
Asistencia
El desarrollador de esta aplicación no ofrece soporte directo.
Novedades
Versión 3.0.1 — You can now support the development of this app with a donation through PayPal, from the app's page in the Homey App Store.
Hikvision NVR & DVR
Hikvision NVR & DVR no es compatible con el Homey seleccionado.
Hikvision NVR & DVR se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Wisse Koelman!
Le haremos saber a Wisse Koelman que te encanta la aplicación. Quizás consideres apoyar a Wisse Koelman haciendo una donación.
Donar a Wisse Koelman
El desarrollador de Hikvision NVR & DVR acepta donaciones.
¡Haz una donación para dar las gracias!
Se han enviado tus sugerencias
Avisaremos a Wisse Koelman para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
