Logic Home Control

Ted Tolboom

Logic Home Control devices for Homey

This app adds support for Logic Home Control Z-wave devices made by Logic Home Control ApS. Links: Logic Home Control app Athom apps Logic Home Control Github repository NOTE: This app is using HomeyConfig composer. Please file Pull Requests on the development branch of this repository and with respect to the refactored files in /drivers and /config folders. Supported devices - ZHC5010, Wall switch module for FUGA® installations product page - ZHC5002, Z-Wave coupler for GIRA product page Supported Languages: - English ZHC5010 Features When ZHC5010 is included, a root device and 4 sub-devices (one for each button) are created. The root device has triggers for Central Scene notifications from all the buttons. Triggers: * Central Scene triggers for: * Single key press. * Double key press. * Long key press (key held). * Key release, after key held. Actions: * The root device is able to control the relay (onoff) * The sub-devices control the linked devices (onoff, dim) * It is possible to control the 4 LED’s, by means of action cards. ZHC5010 application notes Detailed application notes for the ZHC5010, the Logic Home Control app (v2.x) and the ZHC5010 firmware version 2.x can be found here (credits to @cbho) ZHC5002 Features When ZHC5002 is included, a root device and 6 sub-devices (one for each button) are created. The root device has triggers for Central Scene notifications from all the buttons. Triggers: * Central Scene triggers for: * Single key press. * Double key press. * Long key press (key held). * Key release, after key held. Actions: * The root device is able to control the relay (onoff) * The sub-devices control the linked devices (onoff, dim) Change Log: v 2.0.1 - Add link to Homey community Forum v 2.0.0 - Major app update to SDK2, requires Homey SW release >=1.5.6 - Add support for the ZHC5002 - Added all options to support FW 2.x (secure inclusion) of ZHC5010 and ZHC5002 - Restructured parameters settings to simplify options ### Release notes: - Re-pairing (removal and inclusion) based on new app strongly recommended for ZHC5010 (scene flowcards will not work) - It is advised to remove devices before updating the v 2.0.0 as this will reset the device and erase inclusion. - Not removing a device prior to installation of v 2.0.0 will result in five orphaned devices that has to be deleted individually afterwards.

Supported devices

ZHC5002 - Relay
ZHC5010 - Relay

Flow cards

Click on a device above to show related Flow cards only.

When...

ZHC5002 - Relay
Turned on
ZHC5002 - Relay
Turned off
ZHC5002 - Relay
Scene is activated ... ...
i
This card will trigger on a specific button and scene combination pressed.
ZHC5010 - Relay
Turned on
ZHC5010 - Relay
Turned off
ZHC5010 - Relay
A button has been pressed
i
This card will trigger on any button pressed and provides the button and scene tokens.
ZHC5010 - Relay
Scene is activated ... ...
i
This card will trigger on a specific button and scene combination pressed.

And...

ZHC5002 - Relay
Is turned on
ZHC5010 - Relay
Is turned on

Then...

ZHC5002 - Relay
Turn on
ZHC5002 - Relay
Turn off
ZHC5002 - Relay
Toggle on or off
ZHC5002 - Relay
Set LED level ... %
i
Set the "indicator LED brightness level" for a specific button. Range: 0 - 100 percentage of brightness. 0 = indicator LED switched OFF
ZHC5002 - Relay
Set LED flash ... % On/Off period (seconds) On/Off cycles
i
Set the "indicator LED flashing conditions" for a specific button. Level Range: 0 - 100 percentage of brightness. 0 = indicator LED switched OFF On/Off period: Range: 0.1 - 25.5 seconds On/Off cycles: Range: 0 - 255, 0 = off, 255 = forever
ZHC5002 - Relay
Turn off LED / Stop flashing ...
i
Stop the "indicator LED flashing conditions" for a specific button.
ZHC5010 - Relay
Turn on
ZHC5010 - Relay
Turn off
ZHC5010 - Relay
Toggle on or off
ZHC5010 - Relay
Set LED level ... %
i
Set the "indicator LED brightness level" for a specific button. Range: 0 - 100 percentage of brightness. 0 = indicator LED switched OFF
ZHC5010 - Relay
Set LED flash ... % On/Off period (seconds) On/Off cycles
i
Set the "indicator LED flashing conditions" for a specific button. Level Range: 0 - 100 percentage of brightness. 0 = indicator LED switched OFF On/Off period: Range: 0.1 - 25.5 seconds On/Off cycles: Range: 0 - 255, 0 = off, 255 = forever
ZHC5010 - Relay
Turn off LED / Stop flashing ...
i
Stop the "indicator LED flashing conditions" for a specific button.

Reviews

This app has no reviews yet.

You can leave a review once you're using this app.

Thank you for your review.

Do you have a request, problem or found a bug? false instead!

Submit review

Write a review

Support

The developer of this app does not offer direct support.

Install Logic Home Control on

Logic Home Control will install on Homey shortly.

Install

Be the first to hear about Homey’s latest developments.

Subscribe to our newsletter and be on top-of-mind about new Homey features, exclusive offers and more.