NEEO

Niels de Klerk

Deze App brengt het beste van de NEEO afstandsbediening en Homey samen.

This app brings the best of NEEO and Homey together. Controll your Homey connected devices with flows using the NEEO remote and or Controll all your NEEO connected devices with Homey. Use sliders, buttons, images, textfields and switches to build your own virtualdevice, then use the Homey flow editor to hook it up to all kinds of Homey apps. The app supports realtime feedback of information, Change the volume of your receiver and the slider on your remote will change in realtime. Want to visualise your sensors or “what did homey say?”, with this app you can inform the remote about all kinds of state changes including textual. So what did homey say? you can see that on your remote. This App fully supports the use of multiple NEEO brains simultaniously. The NEEO Remote can be ordered at https://store.neeo.com/ or at you local webshop like https://www.robbshop.nl/slimme-afstandsbediening-combo-neeo?sqr=neeo& Please note that this is not an official NEEO app made by NEEO and there will be no support from NEEO concerning this App. Features virtual devices: - Create virtual devices and make them available to NEEO. - Provide the virtual device with a selectable device type. (light, TV, etc…) - Add buttons to your virtual devices. - Add sliders to your virtual devices. - Add switches to your virtual devices. - Add textlabels to your virtual devices. - Add images to your virtual devices. - Add predefined media buttons to your virtual devices. - Add predefined digit buttons to your virtual devices. - Add predefined power buttons to your virtual devices. - Add predefined navigation buttons to your virtual devices. - Added virtual devices contain a default set of buttons. When… flow cards: - “A button is pressed.” This card is triggered when a button of a virtual device is pressed. - “A switch changed state.” This card is triggered when a switch of a virtual device has changed state. - “A slider is changed.” This card is triggered when a slider of a virtual device is changed. - “Event triggered.” This card is triggered when a NEEO event is triggered. (recipe activated, button pressed, slider changed, etc…) …And… flow cards: - “Recipe is|isn’t active.” This card will condition a recipe being active or deactive. …Then flow cards: - “Activate a recipe.” This card will start (Activate) the selected recipe. - “Shutdown a recipe.” This card will shutdown (deactivate) the selected recipe. - “Shutdown all recipes.” This card will shutdown all recipes. - “Press a button.” This card will press the selected button on the NEEO remote. - “Change a Switch.” This card will set the selected switch on the NEEO remote to On/Off. - “Change a Slider.” This card will set the selected slider on the NEEO remote to a specific value. - “Inform slider state. (Percentage)” This card will inform the NEEO remote user interface of the given value in percentage for the selected virtual device slider. - “Inform slider state. (Value)” This card will inform the NEEO remote user interface of the new value for the selected virtual device slider. - “Inform switch state.” This card will inform the NEEO remote user interface of the new value for the selected virtual device switch. - “Inform label or image state.” This card will inform the NEEO remote user interface of the new value for the selected virtual device label or set the image based on a URL or image tag. - “Blink the brain LED.” This card will blink the LED of the selected NEEO brain (every x time blinks for 2 seconds.) TO DO - Adding feature to check specific sensor values in NEEO. - Adding a tool to debug/test ir commands. REQUIREMENTS - NEEO Firmware 0.52.x or newer installed. CHANGELOG. Version 0.52.8 - Fixed TV device issues, Reverted to Fixed initial namings. (Workaround for NEEO CP6 bug.) - Cleaned up code - Removed migration tool -> dynamic naming. Version 0.52.7 - Solved issue where manufacturer name and device name where swapped. Version 0.52.6 - Represent NEEO logo collor. - Solved issue that could happen on first run. Version 0.52.5 - Excluded homey virtual devices from cards that control NEEO to prevent infinate loops. - Updates for homey v2.0 - Added migration text and button in settings to support the newer features. Open the settings and read carefully. - Added component rename feature. just tap the name of a component, change the text and tap the return button - Added versioning to virtual device drivers. - Added support for NEEO device driver updates when ading or renaming capabilities. (Removing capabilities is currently not (yet?) supported by NEEO) - Changed adapter naming (virtual devices) to be more in line with the NEEO SDK. - Changed capability naming, Now using UUID’s for capabilitynames opposed to readable names. (makes more sense with the rename feature) - Changed Driver naming, Needed for future NEEO SDK support. - Changed Appstore logo(s). - Changed in app settings picture. - Code cleaning. - Fixed unhandled promise rejections. - Fixed an issue where virtual devices where allowed to have no name or manufacturer name. (Device then could not be found in the NEEO app.) Version 0.51.9 - Added Community ID. Version 0.51.8 - Fixed default light slider 100/NaN to correct 0/100 % - Debuglog now shows hostname for Unknown request errors. - Code cleaning. - Fetch brain configurations after adding/removing a virtual device on NEEO. - Simplified and updated App settings UI. - After adding a device now shows the device and it’s capabilities opposed to all devices. Version 0.51.7 - Bugfix, Corrupted SDK registration UID Version 0.51.6 - Code formatting and cleaning. - Bugfix, Notifications on a multibrain setup. - Updated new notification methods for NEEO Release 0.51.x - Fixed channel favorites settings page bug. Version 0.50.2 - Added slider minimum value. - Added function while adding a new txtlabel, checkbox to hide/show label name. - Added new device type “CLIMA” - Added feature to select a custom icon while adding a new device. Version 0.50.1 - Fixed a bug in the favourite feature. - Added new device type “MUSICPLAYER” - Removed predefined TUNER capabilities from MEDIAPLAYER. can still be added manually. Existing drivers will be untouched. - Removed predefined VOLUME capabilities from MEDIAPLAYER. can still be added manually. Existing drivers will be untouched. Version 0.49.5 - removed depricated buttons ‘SKIP BACKWARD’ and ‘SKIP FORWARD’ for new virtual devices. Version 0.49.4 - Favorite edit tool. (Settings-> NEEO-> Configuration -> Brain, Favorites ->) - Included “specificname” SDK feature. New virtual devices won’t be added as MEDIA or GAME but with their specific name. - Bug fixes. Version 0.48.3 - bug fix, A copy past one. - Update Firmware card. - Re added a delete virtual device feature to the app settings. thanks for reporting Chris Sesier! Version 0.48.2 - Minor change to the offline brain icon. now has no status led. - Minor change to the image icon. - Fixed NEEO Events. should work again. - Added Firmware check. (…And… Card) - Less logging for event registers. - Fixed settings information button, Wrong Icon removed. - Show device icon in settings device view. - Tested on firmware 0.48.13 Version 0.48.1 - Beta - Fixed some typo’s thanks to Mark Swift. - Fixed device naming in Homey settings. thanks to Mark Swift. - App settings UI changes. - App settings can now be used with Homey AppV2 - Fixed possible memory leak - Reduced stress on NEEO brain and Homey - Detect when a brain is unreachable. - Detect when a brain is reachable again. - Only register homey as NEEO device database when needed. - Only register forward events when needed. - Fixed a bug where discovered data was not properly saved. - Changed to HTTPmin node package for better promise handling. Version 0.48.0 - Beta This has been a huge change and issues are to be expected. - Changed from Homey SDKv1 to SDKv2 - Settings page now show more system information details. - Support base64 images (image Tag) to NEEO. just drag a image tag in the “Update textlabel or image state.” card. Version 0.47.17 - Fixed an issue that would happen when searching a device in NEEO when no virtual devices where pressent on Homey. - Fixed an issue that would happen when searching capabilities in Homey when no virtual devices where pressent. - Fixed an issue that would happen when getting all devices in Homey when no virtual devices where pressent. - Fixed an issue that could happen while retreving brain configuration. Version 0.47.16 - Fixed an issue where selecting a button would crash the app. Version 0.47.15 - Fixed an issue where the app would crash when no NEEO brains where found. Version 0.47.14 - Changed Version Numbering - Added …And… card recipe is active/deactive. - Added …then card blink NEEO Brain LED. - New helpfull information added. - Created individual node modules. (was one file) - General code cleaning - Neeo now support images! and so does this app. - Fixed first time use issues. - Fixed the use of percentage values. (0 to 1). - A lot of smaller bug fixes. Version 0.9.4 - Fixed an issue with a corupted neeobrains save. Version 0.9.3 - Fixed an issue when NEEO requests a unknown capability. Version 0.9.2 - Rewritten event notifications. Version 0.9.1 - Cleaned up a lot of code. Version 0.8.0 - Rework of MDNS Discovery. - Bug Fixes Version 0.7.7 - Added token support (Tags) Version 0.7.6 - Fixed a critical bug that rendered all NEEO flows unusable. - Added textlabels as capability, You can now display textual inforamation. like what did homey say :-) - Cleaned settings code. - Changed icons on app settings - Added textlabel icon for app settings. - Changed initial bonjour interval from unlimited every 10 seconds to 10 times 1 minute. Version 0.7.5 - Default capabilities will now be added when adding a new virtual device. - Settings page look and feel changed. - Added a download configuration button so you can make a backup. - Added setting to view connected NEEO brains. - Added discovery button to manually discover NEEO brains. - Added a delete NEEO brain function to settings. Version 0.7.4 - Fixed a bug where switches didn’t work. - Changed name of “drivers” to “Virtual Devices” - Fixed a bug that causes bonjour error’s. - Added a way to turn off all active recipies. Version 0.7.3 - minor debug log changes. - Changed re registering to rediscovery/reconnect syclus of 10 Minutes. Version 0.7.2 - fixed a bug that caused an issue when using a multi brain setup Version 0.7.1 - First public beta release.

Flow kaarten

Als...

NEEO
Een knop is ingedrukt. Device Button
i
Deze kaart wordt geactiveerd wanneer op een knop wordt gedrukt.
NEEO
Een schakelaar is omgezet. Device Switch
i
Deze kaart wordt geactiveerd wanneer een schakelaar van status verandert.
NEEO
Een schuifregelaar is verplaatst. Device Slider
i
Deze kaart wordt geactiveerd wanneer een schuif van een virtueel apparaat wordt gewijzigd.
NEEO
Gebeurtenis geactiveerd
i
Deze kaart wordt geactiveerd wanneer een NEEO-gebeurtenis wordt ontvangen. (recept geactiveerd, knop ingedrukt, schuifregelaar gewijzigd, enz ...)

En...

NEEO
Recept is actief Room Recipe
NEEO
Nieuwe software is beschikbaar Brain
i
Deze kaart controleert of er nieuwe software beschikbaar is voor de geselecteede NEEO brain.

Dan...

NEEO
Start een recept Room Recipe
i
Deze kaart start de geselecteerde recipe
NEEO
Recept stoppen Room Recipe
i
Deze kaart stopt de geselecteerde recipe.
NEEO
Alle recepten stoppen
i
Deze kaart stopt alle recipes.
NEEO
Druk op een knop Room Device Button
i
Deze kaart drukt op de geselecteerde knop op de NEEO remote.
NEEO
Zet schakelaar Aan/Uit Room Device Switch ...
i
Deze kaart schakelt de geselecteerde schakelaar op de NEEO remote aan/uit.
NEEO
Wijzig een schuifregelaar. Room Device Slider ...
i
Met deze kaart wordt de geselecteerde schuifregelaar op de NEEO-afstandsbediening ingesteld op een specifieke waarde.
NEEO
Informeer de schuifregelaar. (Percentage) Device Slider %
i
Deze kaart informeert de NEEO-afstandsbediening dat de schuifregelaarwaarde is gewijzigd, zodat deze de huidige waarde kan vertegenwoordigen. (in percentage)
NEEO
Informeer de schuifregelaar. (Waarde) Device Slider ...
i
Deze kaart informeert de NEEO-afstandsbediening dat de schuifregelaarwaarde is gewijzigd in een specifieke waarde, zodat deze de huidige waarde kan weergeven.
NEEO
Informeer de schakelaar. Device Switch ...
i
Deze kaart informeert de NEEO-afstandsbediening dat de schakelaar in een specifieke staat is veranderd, zodat deze de huidige waarde kan weergeven.
NEEO
Informeer tekstlabel of afbeelding status. Device textlabel ...
i
Deze kaart informeert de NEEO-afstandsbediening dat de tekst of afbeelding is gewijzigd, zodat deze de huidige waarde kan weergeven. Gebruik de URL of afbeeldingstag voor afbeeldingen.
NEEO
Knipper de LED van de NEEO brain Brain x time(s).
i
Deze kaart zal de LED van de geselecteerde NEEO-brain laten knipperen (knippert gedurende 2 seconden elke x-tijd).
NEEO
NEEO Brain firmware bijwerken. Brain
i
Deze kaart zal de NEEO brain upgraden wanneer een update beschikbaar is

Recensies

Deze app heeft nog geen recensies.

Je kunt een recensie achterlaten als je deze app gebruikt.

Bedankt voor je recensie.

Recensie opslaan

Schrijf een recensie

Ondersteuning

Heb je een probleem met deze app? Neem contact op met de ontwikkelaar, klik hier.

Installeer NEEO op

NEEO wordt binnenkort op Homey geïnstalleerd.

Installeren

Mis geen enkele update over Homey

Meld je aan voor onze nieuwsbrief en blijf up-to-date over Homey's functies en ontwikkelingen.