Novy Intouch Driver V2
With this app you can manage your Novy Intouch devices via Homey.
Installation
After installing the app on your Homey, add your Novy Intouch system by pairing the device.
Just follow the on-screen instructions…
If the device is added: CHECK THE DEVICE SETTINGS to ensure the internal state is correct (see below).
Mobile
A mobile card with on/off button, dimming slider & light switch is available to control the device. - on/off button controls the device state and can be configured via Settings (see below).
- slider controls the motor speed level - light switch controls the lights
The mobile card also contains a sensor displaying the current motor speed level.
Settings
The app allows you to control the following device settings: - On/off action: hood & light | light only | hood only - Run-out mode: enabled/disabled - Light state: on/off (see explenation below) - Speed level: Current motor speed level (see explenation below)
Flow support
Commands
- Device: on, off, toggle & off with run-out mode (10 min.)
- Light: on, off & toggle
- Motor speed: increase, decrease, off, level 1, level 2, level 3, POWER level
Triggers
There are triggers defined for all the above commands
Conditions
No conditions defined yet (coming soon…)
Actions
There are actions defined for all the above commands
Internal state
IMPORTANT: Novy Intouch does not specify seperate signals for on and off actions (only a toggle signal is available). Therefore Homey has to keep an internal state for on/off, light & motor speed level. This internal state is used to be able to send seperate commands for on, off & speed level.
The internal state is updated on: 1. Pressing buttons on the Novy Intouch remote (Homey receives a signal). 2. Triggers from the app (Mobile card) 3. Flow triggers & actions 4. Manual override via Settings
The internal state is NOT updated when: 1. Pressing buttons on the device (i.e. hood) 2. Remote signal is not detected 3. Device safety measures (e.g. overheating) 4. Timeouts (for now…to be implemented) 5. Other unknown reasons…
TODO
- Flow conditions
- Keep track of Auto-Stop timeout (security measure, hood (not light) is turned off after 3 our of inactivity)
- Keep track of POWER level timeout => reduced to speed level 3 after 6 minutes
- Setting to override run out timeout (< 10 minutes)
- Setting to override auto-stop timeout (< 3 hours)
- Setting to override power timeout (<6 minutes)
- Handle light dimming (continues press)
- Create seperate device for the Intouch Remote
Change log
- V2.0.3 [2019-02-03]: Resolved speed level BUG
- V2.0.2 [2018-09-05]: Resolved App store crash
- V2.0.1 [2018-09-04]: Bug fixes
- V2.0.0 [2018-08-26]: Initial release
Final note
The repository is available at: https://github.com/harriedegroot/nl.novy.intouch
If you like the app, consider a donation to support development :beer:
[Donate]
Lees meer ›