Adaptive Thermostat

Turn any temperature sensor and any heater into a thermostat that actually regulates
Turn any temperature sensor and any heater into a thermostat that actually regulates

Leggi di più ›

Dispositivi supportati

Schede dei Flow

Clicca su un dispositivo qui sopra per visualizzare solo le schede dei Flow correlate.

Quando...

Boiler
The central mode changes
i
Fires whoever made the change — a Flow or the picker. Only a real change fires it: setting the mode it already holds does nothing.
Boiler
The boiler is started
Boiler
The boiler is stopped
Thermostat
Attivato
Thermostat
Disattivato
Thermostat
La temperatura nominale è cambiata
Thermostat
La temperatura è cambiata
Thermostat
The preset changes
i
Fires whoever made the change — a Flow, the picker, or a timed preset falling back on its own. It reports the preset you asked for, so with the Activity preset it does not fire when motion switches the level underneath; use Status for that.
Thermostat
It starts calling for heat
i
Fires when this thermostat goes from not needing heat to needing it. Useful to drive a boiler yourself instead of using the Boiler device.
Thermostat
It stops calling for heat
Thermostat
An open window is detected
i
Fires once the detection is confirmed, after the configured delay — not the instant the contact opens.
Thermostat
The window is closed again
Thermostat
The room sensor goes quiet
i
Fires when no fresh reading has arrived for too long. The thermostat stops asking for heat rather than regulating on a dead value — this is your warning that a battery is flat.

E...

Boiler
The boiler is running
Boiler
The central mode is ...
Thermostat
È attivato
Thermostat
The preset is ...
Thermostat
A window is detected open
Thermostat
It is calling for heat
Thermostat
Someone is home

Poi...

Boiler
Set the central mode to ...
i
Applies to every thermostat that opted in, in its settings.
Thermostat
Attiva
Thermostat
Disattiva
Thermostat
Attiva o disattiva
Thermostat
Imposta la temperatura °C
Thermostat
Set the preset to ...
Thermostat
Set the preset to ... for 60 minutes
i
The previous preset comes back on its own when the time is up. It survives a restart of the app.
Thermostat
Cancel the timed preset
Thermostat
Set the target to ... °C
i
Switches the preset to Manual, like turning the dial by hand.
Thermostat
... the window detection
i
Keeps heating even with a window detected open. Useful for a room that is aired all day on purpose.
Thermostat
Force presence to ...
Thermostat
Set the indoor coefficient to ... and the outdoor one to ...
Advanced

Supporto

Hai un problema con questa app? Contatta lo sviluppatore qui.

Novità

Versione 1.1.0 — A thermostat can now drive several heaters in the same room. They follow one setpoint, and the room counts as a single call for heat instead of one per radiator. On switched heaters their cycles are offset from each other, so they never draw their full power at the same moment. Adding a thermostat now asks one question per page: the optional sensors used to sit at the bottom of a screen nobody scrolled, and were missed. Valve battery levels also show up again — they were treated as out of date long before these valves ever report them.

Visualizza il changelog

Adaptive Thermostat

Questa app può gestire l’intero Homey.

Adaptive Thermostat non è compatibile con l’Homey selezionato.

Adaptive Thermostatverrà installato a breve su Homey.
Installa