AX Ventildriver OP
Turned on
CTM Lyng
CTM Lyng OP! Freedom to chose.
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
Adds support for CTM Lyng OP products.
Let Homey control your CTM Lyng OP products.
With thermostats, you can optimize consumption based on usage patterns and electricity prices. This way, you can maintain the same comfort while reducing your electricity bill.
With smart relays, you can shift hot water boiler load to when electricity is cheaper.
With smart lighting control, you can easily change the ambiance in your home.
With safety and security products like Power Cut-off, Stove Guard, and Water Stop, you can stay in control when you're not at home.
Only your imagination sets limits on what you can do
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
AX Ventildriver OP
Turned off
AX Ventildriver OP
The water alarm turned on
AX Ventildriver OP
The water alarm turned off
AX Water leak sensor OP
The battery alarm turned on
AX Water leak sensor OP
The battery alarm turned off
AX Water leak sensor OP
The water alarm turned on
AX Water leak sensor OP
The water alarm turned off
CTM Lyng
Reporting timeout
If the watchdog is enabled in the device settings, this flow will be triggered if the device has not reported within the device's reporting interval.
DimmerPille OP
The dim level changed
DimmerPille OP
Turned on
DimmerPille OP
Turned off
MBD-Dim Bevegelse OP
Turned on
MBD-Dim Bevegelse OP
Turned off
MBD-Dim Bevegelse OP
The motion alarm turned on
MBD-Dim Bevegelse OP
The motion alarm turned off
MBD-Dim Bevegelse OP
The luminance changed
MBD-Dim Bevegelse OP
The dim level changed
MBD-S OP
Turned on
MBD-S OP
Turned off
MBD-S OP
The motion alarm turned on
MBD-S OP
The motion alarm turned off
MBD-S OP
The luminance changed
MBD-S OP
Motion sensor status changed
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mKomfy 1.8 Komfyrvakt
The battery alarm turned on
mKomfy 1.8 Komfyrvakt
The battery alarm turned off
mKomfy 1.8 Komfyrvakt
The heat alarm turned on
mKomfy 1.8 Komfyrvakt
The heat alarm turned off
mKomfy 1.8 Komfyrvakt
The generic alarm turned on
mKomfy 1.8 Komfyrvakt
The generic alarm turned off
mKomfy Tak Komfyrvakt
The battery alarm turned on
mKomfy Tak Komfyrvakt
The battery alarm turned off
mKomfy Tak Komfyrvakt
The heat alarm turned on
mKomfy Tak Komfyrvakt
The heat alarm turned off
mKomfy Tak Komfyrvakt
The generic alarm turned on
mKomfy Tak Komfyrvakt
The generic alarm turned off
mStikk 16A OP
Turned on
mStikk 16A OP
Turned off
mStikk 16A OP
The power changed
mStikk 16A OP
The power meter changed
mStikk 25A OP
Turned on
mStikk 25A OP
Turned off
mStikk 25A OP
The power changed
mStikk 25A OP
The power meter changed
mTouch Astro OP
Turned on
mTouch Astro OP
Turned off
mTouch Bryter OP
The battery level changed
mTouch Bryter OP
The temperature changes
mTouch Bryter OP
mTouch Bryter Button 1: Shortpress
If the top button on the mTouch Bryter is operated with a short press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 2: Short press
If the middle button on the mTouch Bryter is operated with a short press, this card will be activated
mTouch Bryter OP
mTouch Bryter Button 3: Short press
If the bottom button on the mTouch Bryter is operated with a short press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 1: Long press
If the top button on the mTouch Bryter is operated with a long press, this card will be activated.
mTouch Bryter OP
mTouch Bryter Button 2: Long press
If the middle button on the mTouch Bryter is operated with a long press, this card will be activated
mTouch Bryter OP
mTouch Bryter Button 3: Long press
If the bottom button on the mTouch Bryter is operated with a long press, this card will be activated.
mTouch Dim OP
The dim level changed
mTouch Dim OP
Turned on
mTouch Dim OP
Turned off
mTouch Luftføler OP
The battery level changed
mTouch Luftføler OP
The humidity changed
mTouch Luftføler OP
The temperature changes
mTouch One OP
The temperature changes
mTouch One OP
The target temperature changed
mTouch One OP
The power changed
mTouch One OP
The power meter changed
mTouch One OP
Turned on
mTouch One OP
Turned off
mTouch One OP
Relay changed
mTouch One OP
Thermostat mode is changed
mTouch One OP
KeyLock changed
Strømkutt Mic OP
The battery alarm turned on
Strømkutt Mic OP
The battery alarm turned off
Strømkutt Mic OP
The fire alarm turned on
Strømkutt Mic OP
The fire alarm turned off
Strømkutt Mic OP
Strømkutt Mic triggered
If the button on the Strømkutt Mic is operated, this card will run.
TavleRele 25A
Turned on
TavleRele 25A
Turned off
TavleRele 25A
The power changed
TavleRele 25A
The power meter changed
And...
AX Ventildriver OP
Is turned on
AX Ventildriver OP
The water alarm is on
AX Water leak sensor OP
The battery alarm is on
AX Water leak sensor OP
The water alarm is on
DimmerPille OP
Is turned on
MBD-Dim Bevegelse OP
Is turned on
MBD-Dim Bevegelse OP
The motion alarm is on
MBD-S OP
Is turned on
MBD-S OP
The motion alarm is on
MBD-S OP
Motion sensor is turned on
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mKomfy 1.8 Komfyrvakt
The battery alarm is on
mKomfy 1.8 Komfyrvakt
The heat alarm is on
mKomfy 1.8 Komfyrvakt
The generic alarm is on
mKomfy Tak Komfyrvakt
The battery alarm is on
mKomfy Tak Komfyrvakt
The heat alarm is on
mKomfy Tak Komfyrvakt
The generic alarm is on
mStikk 16A OP
Is turned on
mStikk 25A OP
Is turned on
mTouch Astro OP
Is turned on
mTouch Dim OP
Is turned on
mTouch Luftføler OP
Humidity is greater than or equal to %
mTouch Luftføler OP
Temperature is greater than or equal to °C
mTouch One OP
Is turned on
mTouch One OP
Thermostat is heating
Current status of the relay. Does not apply to all thermostat versions. Dependent on firmware.
mTouch One OP
Energy control active
mTouch One OP
Keylock active
mTouch One OP
Device mode is state:
Frost guard and Off is the same
mTouch One OP
Regulator mode is mode:
Strømkutt Mic OP
The battery alarm is on
Strømkutt Mic OP
The fire alarm is on
TavleRele 25A
Is turned on
Then...
AX Ventildriver OP
Turn on
AX Ventildriver OP
Turn off
AX Ventildriver OP
Toggle on or off
DimmerPille OP
Dim to %
DimmerPille OP
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
DimmerPille OP
Turn on
DimmerPille OP
Turn off
DimmerPille OP
Toggle on or off
MBD-Dim Bevegelse OP
Turn on
MBD-Dim Bevegelse OP
Turn off
MBD-Dim Bevegelse OP
Toggle on or off
MBD-Dim Bevegelse OP
Dim to %
MBD-Dim Bevegelse OP
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
MBD-Dim Bevegelse OP
Change dim level to %
You can use this to adjust the dimmer level without the light turning on. The dimmer will then start at this level on the next motion.
MBD-Dim Bevegelse OP
Activate motion sensor Motion sensor
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
MBD-S OP
Turn on
MBD-S OP
Turn off
MBD-S OP
Toggle on or off
MBD-S OP
Activate motion sensor Motion sensor
The motion sensor can be controlled independently of the relay, allowing you to override the automatic function. By turning off the motion sensor, it will not turn the light on again upon detecting movement
mStikk 16A OP
Turn on
mStikk 16A OP
Turn off
mStikk 16A OP
Toggle on or off
mStikk 25A OP
Turn on
mStikk 25A OP
Turn off
mStikk 25A OP
Toggle on or off
mTouch Astro OP
Turn on
mTouch Astro OP
Turn off
mTouch Astro OP
Toggle on or off
mTouch Dim OP
Dim to %
mTouch Dim OP
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
mTouch Dim OP
Turn on
mTouch Dim OP
Turn off
mTouch Dim OP
Toggle on or off
mTouch One OP
Set the temperature °C
mTouch One OP
Turn on
mTouch One OP
Turn off
mTouch One OP
Toggle on or off
mTouch One OP
Set thermostat in state:
This function can be used to change between On, Night saving and Off
mTouch One OP
Set thermostat in mode: and set setpoint to Setpoint
This function can be used to switch between Thermostat, Regulator or Zzilent. Remember to set new setpoint
mTouch One OP
Use Energy control to change setpoint: Positive or negative number in celsius
Energy control can be used to change the setpoint of the thermostat through, for example, smart power management. During high prices, a negative temperature is set, and the opposite is done during low prices. This is a feature that is handled in Homey and not in the thermostat itself. Do not work in regulator mode
mTouch One OP
Deactivate energy control
Disables energy control and sets the setpoint back to when energy control was activated. Manual adjustments made on the thermostat in the meantime will be discarded.
mTouch One OP
Set keylock to Enabled
Tur on and off keylock
TavleRele 25A
Turn on
TavleRele 25A
Turn off
TavleRele 25A
Toggle on or off
Support
Having an issue with this app? Contact the developer here.
What's new
Version 1.1.47 — Improvement on zoneEnrollResponse for the AX Ventildriver OP
CTM Lyng
CTM Lyng is not compatible with the selected Homey.
CTM Lyng will install on Homey shortly.
Changelog
We’ll send a thank you to CTM Lyng!
We’ll let CTM Lyng know you love the app.
Your suggestion has been sent
We'll notify CTM Lyng you've sent a suggestion.
