Quatt

Know when your Quatt heatpump is heating your house

Stay connected with your Quatt heatpump and know when and how it's heating your home. With this Homey app, you can use the sensor data from your Quatt heatpump to create flows to act on changes in the heatpump. Note to Quatt Duo users: this app will show your Quatt heatpumps as a single device, but the values of both heatpumps are available as separate sensor values. Available sensor values: - CV Currently Heating - Water supply temperature setpoint - Water flow speed - Supervisory Control Mode - Outside temperature - Thermostat heating - Limited by COP - Boiler water supply temperature - Current room temperature - Thermostat cooling on - OnOff Boiler On - Heatpump outgoing water temperature - Room temperature setpoint - Hot Water Active - Boiler Flame On - Boiler outgoing water temperature - Silent mode - Heatpump incoming water temperature - Boiler Incoming water temperature - Heatpump working mode - Thermostat Hot Water On - CV Mode Active - Power consumption - Thermal power output Computed sensor values: - Heatpump COP - Heatpump water temperature difference

Unterstützte Geräte

Flow-Karten

Klicke oben auf ein Gerät, um nur verwandte Flow-Karten anzuzeigen.

Wenn ...

Quatt

Der Verbrauch hat sich gändert

Quatt

CV is CV heating mode

This card starts when the CV is (not) heating.

Quatt

CV should Quatt CV heating command

This card triggers when Quatt CiC's command to the CV whether to start heating or not changes.

Quatt

Boiler on/off mode should be Boiler on/off mode

Only valid for on/off boilers (non-modulating). This card triggers when Quatt CiC's command to the boiler whether to turn on or off changes.

Quatt

Hot water is Hot water in use

This card starts when hot tap water is used.

Quatt

Boiler flame is Boiler flame

This card starts when the boiler flame switches from on -> off or vice versa.

Quatt

Boiler incoming water temperature changed

This card starts when the temperature of the water going into the boiler has changed.

Quatt

Boiler outgoing water temperature changed

This card starts when the temperature of the water coming out of the boiler has changed.

Quatt

Water flow speed changed

This card starts when the current flow rate of the water in the heating circuit has changed.

Quatt

Boiler water supply temperature changed

This card starts when the current temperature of the water supplied to the boiler has changed.

Quatt

Coefficient of performance of Heatpump selection has changed

This card starts when the coefficient of performance of the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Heatpump selection Limited

This card starts whenever value indicating that the heatpump is limited by COP changes. The heatpump might be limited by the COP (Coefficient of Performance) based on energy pricing, current ambient temperature and heat pump outlet temperature. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Silent mode of Heatpump selection is Silent mode

This card starts whenever the heatpump switches from silent mode. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Water temperature delta of Heatpump selection has changed

This card starts when the water temperature delta of the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Incoming water temperature of Heatpump selection has changed

This card starts when the current temperature of the water going into the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Outgoing water temperature of Heatpump selection has changed

This card starts when the current temperature of the water coming out of the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Outside temperature measured by Heatpump selection has changed

This card starts when the current ambient temperature outside the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Thermal power of Heatpump selection has changed

This card starts when the thermal power output of the heatpump has changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Working mode of Heatpump selection is: Working mode

This card starts whenever the current working mode of the heatpump is changed. If you only have one heatpump, the selection of the heatpump doesn't matter (1/2 can be used interchangeably).

Quatt

Supervisory Control Mode is: Working mode

This card starts whenever the current supervisory control mode of the heatpump is changed.

Quatt

Thermostat is set to Cooling

This card starts whenever the setting in the thermostat whether to enable cooling or not has changed.

Quatt

Thermostat warm water setting is set to Hot water

This card starts whenever the thermostat setting to enable/disable hot tap water has changed.

Quatt

Thermostat heating is set to Heating

This card starts whenever the value representing the command from thermostat to switch on heating has changed.

Quatt

Current room temperature changed

This card starts when the current temperature of the room as measured by the thermostat has changed. If you have a multiroom thermostat system, this will be your central thermostat that is connected to your boiler/CV.

Quatt

Room temperature setpoint changed

This card starts when the current setpoint temperature for the room as set by your central thermostat has changed.

Quatt

Water supply temperature setpoint changed

This card starts when the current setpoint for water supply temperature as set by your central thermostat has changed.

Und ...

Quatt

CV is heating

Whether the CV is currently heating (actual state, not the Quatt CiC's command)

Quatt

CV should be heating

Quatt CiC's command to the CV whether to start heating.

Quatt

Boiler on/off setting is on

Only valid for on/off boilers (non-modulating). This condition is for the Quatt CiC's command to turn an on/off boiler on or off.

Quatt

Hot tap water is being used

Whether hot tap water is currently being used.

Quatt

Boiler flame is on

Quatt

Boiler incoming water temperature is greater than Temperature (°C)

Quatt

Boiler outgoing water temperature is greater than Temperature (°C)

Quatt

Water flow speed is greater than Flow speed (L/h)

Quatt

Boiler water supply temperature is greater than Temperature (°C)

The temperature of the water supply to the boiler as measured by the flow meter.

Quatt

Coefficient of performance of Heatpump selection is greater than COP

The COP is a ratio. A value > 1 means that the heatpump delivers more thermal power than the electrical power it consumes. If you only have one heatpump, you can leave the selection on any/all/1 heatpump.

Quatt

Heatpump is limited by COP

Whether the heatpump is limited by the COP. It might be limited by the COP (Coefficient of Performance) based on energy pricing, current ambient temperature and heat pump outlet temperature.

Quatt

Heatpump selection is set to silent mode

If you only have one heatpump, you can leave the selection heatpump (i.e. it doesn't matter which selection you pick).

Quatt

Water temperature delta of Heatpump selection is greater than Temperature (°C)