DSC Alarm Partition
The generic alarm turned on
Envisalink
Connect DSC and Vista alarm sensors to Homey, privately over your local network.
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
Bring your DSC or Honeywell/Ademco Vista alarm sensors into everyday Homey routines through an EyezOn Envisalink. See doors, windows, motion and reported panel status alongside the rest of your home, and build useful Flows over your local network without Home Assistant or a separate bridge. Use reported alarm-status changes to turn cameras on when a partition becomes Armed Stay, or switch lights off when it becomes Armed Away. Existing DSC devices and Flows keep their identities when updating this app.
Choose the matching DSC or Vista partition and zone devices during setup. Monitoring starts with alarm control disabled; after testing, you can enable clearly labelled controls and matching Flow actions. Vista adds Instant (Stay without entry delay) and Maximum (Away without entry delay), and requires a user code for every control command. Vista support is being validated with physical testers: Entry Delay is not explicitly reported by its TPI, and zone restoration can be delayed or uncertain, so stale observations never invent a closed zone. Supports Envisalink 3 and 4-family modules on compatible Homey Pro models running Homey 13 or later. This integration supplements, but never replaces, your panel, keypad, siren, professional monitoring or life-safety equipment.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
DSC Alarm Partition
The generic alarm turned off
DSC Alarm Partition
The fire alarm turned on
DSC Alarm Partition
The fire alarm turned off
DSC Alarm Partition
The battery alarm turned on
DSC Alarm Partition
The battery alarm turned off
DSC Alarm Partition
The tamper alarm turned on
DSC Alarm Partition
The tamper alarm turned off
DSC Alarm Partition
Alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
DSC Alarm Zone
The contact alarm turned on
DSC Alarm Zone
The contact alarm turned off
DSC Alarm Zone
The generic alarm turned on
DSC Alarm Zone
The generic alarm turned off
DSC Alarm Zone
The tamper alarm turned on
DSC Alarm Zone
The tamper alarm turned off
DSC Alarm Zone
The battery alarm turned on
DSC Alarm Zone
The battery alarm turned off
Vista Alarm Partition
The generic alarm turned on
Vista Alarm Partition
The generic alarm turned off
Vista Alarm Partition
The fire alarm turned on
Vista Alarm Partition
The fire alarm turned off
Vista Alarm Partition
The battery alarm turned on
Vista Alarm Partition
The battery alarm turned off
Vista Alarm Partition
The tamper alarm turned on
Vista Alarm Partition
The tamper alarm turned off
Vista Alarm Partition
Vista alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
Vista Alarm Zone
The contact alarm turned on
Vista Alarm Zone
The contact alarm turned off
Vista Alarm Zone
The generic alarm turned on
Vista Alarm Zone
The generic alarm turned off
Vista Alarm Zone
The tamper alarm turned on
Vista Alarm Zone
The tamper alarm turned off
Vista Alarm Zone
The battery alarm turned on
Vista Alarm Zone
The battery alarm turned off
And...
DSC Alarm Partition
The generic alarm is on
DSC Alarm Partition
The fire alarm is on
DSC Alarm Partition
The battery alarm is on
DSC Alarm Partition
The tamper alarm is on
DSC Alarm Partition
Alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
DSC Alarm Zone
The contact alarm is on
DSC Alarm Zone
The generic alarm is on
DSC Alarm Zone
The tamper alarm is on
DSC Alarm Zone
The battery alarm is on
Vista Alarm Partition
The generic alarm is on
Vista Alarm Partition
The fire alarm is on
Vista Alarm Partition
The battery alarm is on
Vista Alarm Partition
The tamper alarm is on
Vista Alarm Partition
Vista alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
Vista Alarm Zone
The contact alarm is on
Vista Alarm Zone
The generic alarm is on
Vista Alarm Zone
The tamper alarm is on
Vista Alarm Zone
The battery alarm is on
Then...
DSC Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm with no entry delay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Disarm the system
Alarm control and a DSC user code must be configured in the partition settings.
DSC Alarm Partition
Refresh panel status
Vista Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Arm Instant (Stay, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. This is Instant, not Night-Stay.
Vista Alarm Partition
Arm Maximum (Away, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. Maximum removes entry delay.
Vista Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Disarm the system
Alarm control and a Vista user code must be configured in the partition settings.
Vista Alarm Partition
Refresh panel status
Support
Having an issue with this app? Contact the developer via email.
What’s new
Version 1.4.1 — Combined DSC and Vista Test build with separate Vista devices, Instant/Maximum controls and status Flows. Corrected the Vista Disarm Flow hint to name the Vista user code. Existing DSC devices and Flows are preserved. Physical Vista acceptance remains required.
Envisalink
Envisalink is not compatible with the selected Homey.
Envisalink will install on Homey shortly.
Changelog
We’ll send a thank you to Michael Curry!
We’ll let Michael Curry know you love the app. Maybe consider supporting Michael Curry by making a donation?
Donate to Michael Curry
The developer of Envisalink accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Michael Curry you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
