Fujitsu Airstage

Fujitsu Airstage — Homey App ============================== Controls Fujitsu Airstage air conditioning units over the local Wi-Fi network. REQUIREMENTS ------------ - Homey Pro (2023+) with firmware >= 12.0.0 - Fujitsu Airstage Wi-Fi adapter connected to your local network FEATURES -------- All features match the Home Assistant integration (ha_airstage): Power on/off Target temperature (0.5 °C steps, 16–30 °C) Indoor temperature sensor Outdoor temperature sensor HVAC modes: Cool, Heat, Fan Only, Dry, Auto Fan speed: Quiet, Low, Medium-Low, Medium, Medium-High, High, Auto Swing / vertical direction (Swing, Highest … Lowest) Optional (enabled automatically when the device supports them): Economy mode Powerful mode Outdoor unit low noise Energy saving fan Quiet fan Indoor LED display Human detection auto-save SETUP ----- 1. Install App 2. In the Homey app, go to "Add device" → "Fujitsu Airstage" → enter: - IP address of the AC Wi-Fi adapter - Device ID (12-character MAC without colons, e.g. E8FB1C123456) DEVICE ID --------- The Device ID is the MAC address of the Wi-Fi adapter with no colons, in UPPERCASE (e.g. E8FB1C123456). You can find it: - On the sticker on the device - In your router's DHCP client list - In the Fujitsu Airstage mobile app → device settings SETTINGS (per device) ---------------------- Use HTTPS — enable if your network requires it (default: off) Turn on before set — enables AC before changing temperature (default: off) Poll interval — how often to read device state, in seconds (default: 10) NOTES ----- - pyairstage library by Daniel Kaldheim (https://github.com/danielkaldheim/pyairstage) - HA integration reference: https://github.com/danielkaldheim/ha_airstage - Cloud mode (Airstage cloud API) is not implemented — local network only.