Qubino

Qubino Qubino

Turn any home into a smart home with Qubino

With the products of Qubino you can remotely control your shading, lightning, energy meters and other household appliances. Qubino adds support for Z-Wave smart home devices. Connect with Homey and create Flows to make your life easier.
What's new in v4.0.0
Updated to latest Homey Apps SDK version.

Enheter som stöds

DIN Dimmer (ZMNHSD)
Flush 1 Relay (ZMNHAA)
Flush 1 Relay (ZMNHAD)
Flush 1D Relay (ZMNHND)
Flush 2 Relay (ZMNHBA)
Flush 2 Relay (ZMNHBD)
Flush Dimmer (ZMNHDA)
Flush Dimmer (ZMNHDD)
Flush Dimmer 0 - 10V (ZMNHVD)
Flush Heat & Cool Thermostat (ZMNHKD)
Flush On/Off Thermostat (ZMNHIA)
Flush On/Off Thermostat (ZMNHID)
Flush On/Off Thermostat 2 (ZMNKID)
Flush PWM Thermostat (ZMNHLD)
Flush RGBW Dimmer (ZMNHWD)
Flush Shutter (ZMNHCD)
Flush Shutter DC (ZMNHOD)
LUXY Smart Light (ZMNHQD)
LUXY Smart Switch (ZMNKAD)
Mini Dimmer (ZMNHHD)
Smart Meter (ZMNHTD)
Smart Plug (ZMNHYD)

Flow-kort

Klicka på en enhet ovan för att visa endast relaterade Flow-kort.

När...

DIN Dimmer (ZMNHSD)
Aktiverad
DIN Dimmer (ZMNHSD)
Inaktiverad
DIN Dimmer (ZMNHSD)
Dimningsnivå ändrades
DIN Dimmer (ZMNHSD)
Elmätaren ändrades
DIN Dimmer (ZMNHSD)
Strömmen ändrades
DIN Dimmer (ZMNHSD)
Temperaturen ändrades
Flush 1 Relay (ZMNHAA)
Aktiverad
Flush 1 Relay (ZMNHAA)
Inaktiverad
Flush 1 Relay (ZMNHAA)
Strömmen ändrades
Flush 1 Relay (ZMNHAA)
Elmätaren ändrades
Flush 1 Relay (ZMNHAA)
Temperaturen ändrades
Flush 1 Relay (ZMNHAA)
Input 2 turned on
Flush 1 Relay (ZMNHAA)
Input 2 turned off
Flush 1 Relay (ZMNHAA)
Input 2 was toggled
Flush 1 Relay (ZMNHAA)
Input 3 turned on
Flush 1 Relay (ZMNHAA)
Input 3 turned off
Flush 1 Relay (ZMNHAA)
Input 3 was toggled
Flush 1 Relay (ZMNHAD)
Strömmen ändrades
Flush 1 Relay (ZMNHAD)
Elmätaren ändrades
Flush 1 Relay (ZMNHAD)
Temperaturen ändrades
Flush 1 Relay (ZMNHAD)
Aktiverad
Flush 1 Relay (ZMNHAD)
Inaktiverad
Flush 1 Relay (ZMNHAD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 turned on
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
Temperaturen ändrades
Flush 1D Relay (ZMNHND)
Aktiverad
Flush 1D Relay (ZMNHND)
Inaktiverad
Flush 1D Relay (ZMNHND)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 2 Relay (ZMNHBA)
Aktiverad
Flush 2 Relay (ZMNHBA)
Inaktiverad
Flush 2 Relay (ZMNHBA)
Strömmen ändrades
Flush 2 Relay (ZMNHBA)
Elmätaren ändrades
Flush 2 Relay (ZMNHBA)
Temperaturen ändrades
Flush 2 Relay (ZMNHBD)
Temperaturen ändrades
Flush Dimmer (ZMNHDA)
Aktiverad
Flush Dimmer (ZMNHDA)
Inaktiverad
Flush Dimmer (ZMNHDA)
Dimningsnivå ändrades
Flush Dimmer (ZMNHDA)
Elmätaren ändrades
Flush Dimmer (ZMNHDA)
Strömmen ändrades
Flush Dimmer (ZMNHDA)
Temperaturen ändrades
Flush Dimmer (ZMNHDA)
Input 2 turned on
Flush Dimmer (ZMNHDA)
Input 2 turned off
Flush Dimmer (ZMNHDA)
Input 2 was toggled
Flush Dimmer (ZMNHDA)
Input 3 turned on
Flush Dimmer (ZMNHDA)
Input 3 turned off
Flush Dimmer (ZMNHDA)
Input 3 was toggled
Flush Dimmer (ZMNHDD)
Aktiverad
Flush Dimmer (ZMNHDD)
Inaktiverad
Flush Dimmer (ZMNHDD)
Dimningsnivå ändrades
Flush Dimmer (ZMNHDD)
Elmätaren ändrades
Flush Dimmer (ZMNHDD)
Strömmen ändrades
Flush Dimmer (ZMNHDD)
Temperaturen ändrades
Flush Dimmer (ZMNHDD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 turned on
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer 0 - 10V (ZMNHVD)
Aktiverad
Flush Dimmer 0 - 10V (ZMNHVD)
Inaktiverad
Flush Dimmer 0 - 10V (ZMNHVD)
Dimningsnivå ändrades
Flush Dimmer 0 - 10V (ZMNHVD)
Temperaturen ändrades
Flush Heat & Cool Thermostat (ZMNHKD)
Måltemperaturen ändrades
Flush Heat & Cool Thermostat (ZMNHKD)
Temperaturen ändrades
Flush Heat & Cool Thermostat (ZMNHKD)
Elmätaren ändrades
Flush Heat & Cool Thermostat (ZMNHKD)
Strömmen ändrades
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Thermostat mode changed to ...
Flush On/Off Thermostat (ZMNHIA)
Måltemperaturen ändrades
Flush On/Off Thermostat (ZMNHIA)
Temperaturen ändrades
Flush On/Off Thermostat (ZMNHIA)
Elmätaren ändrades
Flush On/Off Thermostat (ZMNHIA)
Strömmen ändrades
Flush On/Off Thermostat (ZMNHIA)
Input 2 turned on
Flush On/Off Thermostat (ZMNHIA)
Input 2 turned off
Flush On/Off Thermostat (ZMNHIA)
Input 2 was toggled
Flush On/Off Thermostat (ZMNHIA)
Input 3 turned on
Flush On/Off Thermostat (ZMNHIA)
Input 3 turned off
Flush On/Off Thermostat (ZMNHIA)
Input 3 was toggled
Flush On/Off Thermostat (ZMNHIA)
Thermostat mode changed to ...
Flush On/Off Thermostat (ZMNHID)
Måltemperaturen ändrades
Flush On/Off Thermostat (ZMNHID)
Temperaturen ändrades
Flush On/Off Thermostat (ZMNHID)
Elmätaren ändrades
Flush On/Off Thermostat (ZMNHID)
Strömmen ändrades
Flush On/Off Thermostat (ZMNHID)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Thermostat mode changed to ...
Flush On/Off Thermostat 2 (ZMNKID)
Måltemperaturen ändrades
Flush On/Off Thermostat 2 (ZMNKID)
Temperaturen ändrades
Flush On/Off Thermostat 2 (ZMNKID)
Elmätaren ändrades
Flush On/Off Thermostat 2 (ZMNKID)
Strömmen ändrades
Flush On/Off Thermostat 2 (ZMNKID)
Thermostat mode changed to ...
Flush PWM Thermostat (ZMNHLD)
Måltemperaturen ändrades
Flush PWM Thermostat (ZMNHLD)
Temperaturen ändrades
Flush PWM Thermostat (ZMNHLD)
Elmätaren ändrades
Flush PWM Thermostat (ZMNHLD)
Strömmen ändrades
Flush PWM Thermostat (ZMNHLD)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Thermostat mode changed to ...
Flush RGBW Dimmer (ZMNHWD)
Aktiverad
Flush RGBW Dimmer (ZMNHWD)
Inaktiverad
Flush RGBW Dimmer (ZMNHWD)
Dimningsnivå ändrades
Flush Shutter (ZMNHCD)
Position ändrad
Flush Shutter (ZMNHCD)
Elmätaren ändrades
Flush Shutter (ZMNHCD)
Strömmen ändrades
Flush Shutter (ZMNHCD)
Temperaturen ändrades
Flush Shutter DC (ZMNHOD)
Position ändrad
Flush Shutter DC (ZMNHOD)
Elmätaren ändrades
Flush Shutter DC (ZMNHOD)
Strömmen ändrades
Flush Shutter DC (ZMNHOD)
Temperaturen ändrades
LUXY Smart Light (ZMNHQD)
Aktiverad
LUXY Smart Light (ZMNHQD)
Inaktiverad
LUXY Smart Light (ZMNHQD)
Dimningsnivå ändrades
LUXY Smart Light (ZMNHQD)
Volymen ändrades
LUXY Smart Light (ZMNHQD)
Buzzer turned on
LUXY Smart Light (ZMNHQD)
Buzzer turned off
LUXY Smart Light (ZMNHQD)
Alarm mode turned off
LUXY Smart Light (ZMNHQD)
Alarm mode turned off
LUXY Smart Switch (ZMNKAD)
Aktiverad
LUXY Smart Switch (ZMNKAD)
Inaktiverad
LUXY Smart Switch (ZMNKAD)
Dimningsnivå ändrades
LUXY Smart Switch (ZMNKAD)
Alarm mode turned off
LUXY Smart Switch (ZMNKAD)
Alarm mode turned on
Mini Dimmer (ZMNHHD)
Aktiverad
Mini Dimmer (ZMNHHD)
Inaktiverad
Mini Dimmer (ZMNHHD)
Dimningsnivå ändrades
Mini Dimmer (ZMNHHD)
Elmätaren ändrades
Mini Dimmer (ZMNHHD)
Strömmen ändrades
Smart Meter (ZMNHTD)
Spänningen ändrades
Smart Meter (ZMNHTD)
Den elektriska strömmen ändrades
Smart Meter (ZMNHTD)
Strömmen ändrades
Smart Plug (ZMNHYD)
Spänningen ändrades
Smart Plug (ZMNHYD)
Den elektriska strömmen ändrades
Smart Plug (ZMNHYD)
Strömmen ändrades
Smart Plug (ZMNHYD)
Elmätaren ändrades
Smart Plug (ZMNHYD)
Aktiverad
Smart Plug (ZMNHYD)
Inaktiverad

Och...

DIN Dimmer (ZMNHSD)
Är på
Flush 1 Relay (ZMNHAA)
Är på
Flush 1 Relay (ZMNHAD)
Är på
Flush 1D Relay (ZMNHND)
Är på
Flush 2 Relay (ZMNHBA)
Är på
Flush Dimmer (ZMNHDA)
Är på
Flush Dimmer (ZMNHDD)
Är på
Flush Dimmer 0 - 10V (ZMNHVD)
Är på
Flush RGBW Dimmer (ZMNHWD)
Är på
LUXY Smart Light (ZMNHQD)
Är på
LUXY Smart Switch (ZMNKAD)
Är på
Mini Dimmer (ZMNHHD)
Är på
Smart Plug (ZMNHYD)
Är på

Då...

DIN Dimmer (ZMNHSD)
Aktivera
DIN Dimmer (ZMNHSD)
stäng av
DIN Dimmer (ZMNHSD)
Växla på och av
DIN Dimmer (ZMNHSD)
Dimma till %
DIN Dimmer (ZMNHSD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
DIN Dimmer (ZMNHSD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1 Relay (ZMNHAA)
Aktivera
Flush 1 Relay (ZMNHAA)
stäng av
Flush 1 Relay (ZMNHAA)
Växla på och av
Flush 1 Relay (ZMNHAA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1 Relay (ZMNHAD)
Aktivera
Flush 1 Relay (ZMNHAD)
stäng av
Flush 1 Relay (ZMNHAD)
Växla på och av
Flush 1 Relay (ZMNHAD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1D Relay (ZMNHND)
Aktivera
Flush 1D Relay (ZMNHND)
stäng av
Flush 1D Relay (ZMNHND)
Växla på och av
Flush 2 Relay (ZMNHBA)
Aktivera
Flush 2 Relay (ZMNHBA)
stäng av
Flush 2 Relay (ZMNHBA)
Växla på och av
Flush 2 Relay (ZMNHBA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 2 Relay (ZMNHBD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer (ZMNHDA)
Aktivera
Flush Dimmer (ZMNHDA)
stäng av
Flush Dimmer (ZMNHDA)
Växla på och av
Flush Dimmer (ZMNHDA)
Dimma till %
Flush Dimmer (ZMNHDA)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Dimmer (ZMNHDA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer (ZMNHDD)
Aktivera
Flush Dimmer (ZMNHDD)
stäng av
Flush Dimmer (ZMNHDD)
Växla på och av
Flush Dimmer (ZMNHDD)
Dimma till %
Flush Dimmer (ZMNHDD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Dimmer (ZMNHDD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer 0 - 10V (ZMNHVD)
Aktivera
Flush Dimmer 0 - 10V (ZMNHVD)
stäng av
Flush Dimmer 0 - 10V (ZMNHVD)
Växla på och av
Flush Dimmer 0 - 10V (ZMNHVD)
Dimma till %
Flush Dimmer 0 - 10V (ZMNHVD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Heat & Cool Thermostat (ZMNHKD)
Ställ in temperaturen °C
Flush Heat & Cool Thermostat (ZMNHKD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Heat & Cool Thermostat (ZMNHKD)
Change thermostat mode ...
Flush On/Off Thermostat (ZMNHIA)
Ställ in temperaturen °C
Flush On/Off Thermostat (ZMNHIA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat (ZMNHIA)
Change thermostat mode ...
Flush On/Off Thermostat (ZMNHID)
Ställ in temperaturen °C
Flush On/Off Thermostat (ZMNHID)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat (ZMNHID)
Change thermostat mode ...
Flush On/Off Thermostat 2 (ZMNKID)
Ställ in temperaturen °C
Flush On/Off Thermostat 2 (ZMNKID)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat 2 (ZMNKID)
Change thermostat mode ...
Flush PWM Thermostat (ZMNHLD)
Ställ in temperaturen °C
Flush PWM Thermostat (ZMNHLD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush PWM Thermostat (ZMNHLD)
Change thermostat mode ...
Flush RGBW Dimmer (ZMNHWD)
Aktivera
Flush RGBW Dimmer (ZMNHWD)
stäng av
Flush RGBW Dimmer (ZMNHWD)
Växla på och av
Flush RGBW Dimmer (ZMNHWD)
Dimma till %
Flush RGBW Dimmer (ZMNHWD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush RGBW Dimmer (ZMNHWD)
Ställ in nyans °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
Flush RGBW Dimmer (ZMNHWD)
Ställ in en färg ...
Flush RGBW Dimmer (ZMNHWD)
Ställ in en slumpvis färg
Flush RGBW Dimmer (ZMNHWD)
Ställ in mättnad %
Flush RGBW Dimmer (ZMNHWD)
Ställ in en temperatur %
i
Justerar temperaturen på ljuset. Ett högre värde innebär en varmare färg.
Flush Shutter (ZMNHCD)
Ställ in positionen till %
i
Change the position to open (100%), closed (0%), or a value in between.
Flush Shutter (ZMNHCD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Shutter DC (ZMNHOD)
Ställ in positionen till %
i
Change the position to open (100%), closed (0%), or a value in between.
Flush Shutter DC (ZMNHOD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
LUXY Smart Light (ZMNHQD)
Aktivera
LUXY Smart Light (ZMNHQD)
stäng av
LUXY Smart Light (ZMNHQD)
Växla på och av
LUXY Smart Light (ZMNHQD)
Dimma till %
LUXY Smart Light (ZMNHQD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
LUXY Smart Light (ZMNHQD)
Ställ in nyans °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
LUXY Smart Light (ZMNHQD)
Ställ in en färg ...
LUXY Smart Light (ZMNHQD)
Ställ in en slumpvis färg
LUXY Smart Light (ZMNHQD)
Ställ in mättnad %
LUXY Smart Light (ZMNHQD)
Ställ in volymen på %
LUXY Smart Light (ZMNHQD)
Set relative volume %
i
Change the volume with respect to the device's current volume.
LUXY Smart Light (ZMNHQD)
Turn on buzzer
LUXY Smart Light (ZMNHQD)
Turn buzzer off
LUXY Smart Switch (ZMNKAD)
Aktivera
LUXY Smart Switch (ZMNKAD)
stäng av
LUXY Smart Switch (ZMNKAD)
Växla på och av
LUXY Smart Switch (ZMNKAD)
Dimma till %
LUXY Smart Switch (ZMNKAD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
LUXY Smart Switch (ZMNKAD)
Ställ in nyans °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
LUXY Smart Switch (ZMNKAD)
Ställ in en färg ...
LUXY Smart Switch (ZMNKAD)
Ställ in en slumpvis färg
LUXY Smart Switch (ZMNKAD)
Ställ in mättnad %
Mini Dimmer (ZMNHHD)
Aktivera
Mini Dimmer (ZMNHHD)
stäng av
Mini Dimmer (ZMNHHD)
Växla på och av
Mini Dimmer (ZMNHHD)
Dimma till %
Mini Dimmer (ZMNHHD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Mini Dimmer (ZMNHHD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Smart Meter (ZMNHTD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Smart Plug (ZMNHYD)
Aktivera
Smart Plug (ZMNHYD)
stäng av
Smart Plug (ZMNHYD)
Växla på och av
Smart Plug (ZMNHYD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.

Recensioner

Den här appen har inga recensioner än.

Du kan lämna en recension när du använder den här appen.

Tack för din recension.

Har du en fråga, ett problem eller har du hittat en bugg? false istället!

Skicka recension

Skriv en recension

Support

Utvecklaren av den här appen erbjuder ingen direktsupport.

Installera Qubino på

Qubino installeras på Homey inom kort.

Installera

Bli den första att höra om Homeys senaste utveckling.

Prenumerera på vårt nyhetsbrev och så får du veta allt om nya Homey-funktioner, exklusiva erbjudanden och mer.