Homey Pro (Early 2023) is now available in Early Access

Qubino

Turn any home into a smart home with Qubino
Turn any home into a smart home with Qubino

Read more ›

Supported devices

Flow cards

Click on a device above to show related Flow cards only.

When...

DIN Dimmer (ZMNHSD)
Turned on
DIN Dimmer (ZMNHSD)
Turned off
DIN Dimmer (ZMNHSD)
Dim-level changed
DIN Dimmer (ZMNHSD)
The power meter changed
DIN Dimmer (ZMNHSD)
The power changed
DIN Dimmer (ZMNHSD)
The temperature changed
Flush 1 Relay (ZMNHAA)
Turned on
Flush 1 Relay (ZMNHAA)
Turned off
Flush 1 Relay (ZMNHAA)
The power changed
Flush 1 Relay (ZMNHAA)
The power meter changed
Flush 1 Relay (ZMNHAA)
The temperature changed
Flush 1 Relay (ZMNHAA)
Input 2 turned on
Flush 1 Relay (ZMNHAA)
Input 2 turned off
Flush 1 Relay (ZMNHAA)
Input 2 was toggled
Flush 1 Relay (ZMNHAA)
Input 3 turned on
Flush 1 Relay (ZMNHAA)
Input 3 turned off
Flush 1 Relay (ZMNHAA)
Input 3 was toggled
Flush 1 Relay (ZMNHAD)
The power changed
Flush 1 Relay (ZMNHAD)
The power meter changed
Flush 1 Relay (ZMNHAD)
The temperature changed
Flush 1 Relay (ZMNHAD)
Turned on
Flush 1 Relay (ZMNHAD)
Turned off
Flush 1 Relay (ZMNHAD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 turned on
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1 Relay (ZMNHAD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
The temperature changed
Flush 1D Relay (ZMNHND)
Turned on
Flush 1D Relay (ZMNHND)
Turned off
Flush 1D Relay (ZMNHND)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 1D Relay (ZMNHND)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush 2 Relay (ZMNHBA)
Turned on
Flush 2 Relay (ZMNHBA)
Turned off
Flush 2 Relay (ZMNHBA)
The power changed
Flush 2 Relay (ZMNHBA)
The power meter changed
Flush 2 Relay (ZMNHBA)
The temperature changed
Flush 2 Relay (ZMNHBD)
The temperature changed
Flush 2 Relay (ZMNHBD)
Input 1 turned on
Flush 2 Relay (ZMNHBD)
Input 1 turned off
Flush 2 Relay (ZMNHBD)
Input 1 was toggled
Flush 2 Relay (ZMNHBD)
Input 2 turned on
Flush 2 Relay (ZMNHBD)
Input 2 turned off
Flush 2 Relay (ZMNHBD)
Input 2 was toggled
Flush Dimmer (ZMNHDA)
Turned on
Flush Dimmer (ZMNHDA)
Turned off
Flush Dimmer (ZMNHDA)
Dim-level changed
Flush Dimmer (ZMNHDA)
The power meter changed
Flush Dimmer (ZMNHDA)
The power changed
Flush Dimmer (ZMNHDA)
The temperature changed
Flush Dimmer (ZMNHDA)
Input 2 turned on
Flush Dimmer (ZMNHDA)
Input 2 turned off
Flush Dimmer (ZMNHDA)
Input 2 was toggled
Flush Dimmer (ZMNHDA)
Input 3 turned on
Flush Dimmer (ZMNHDA)
Input 3 turned off
Flush Dimmer (ZMNHDA)
Input 3 was toggled
Flush Dimmer (ZMNHDD)
Turned on
Flush Dimmer (ZMNHDD)
Turned off
Flush Dimmer (ZMNHDD)
Dim-level changed
Flush Dimmer (ZMNHDD)
The power meter changed
Flush Dimmer (ZMNHDD)
The power changed
Flush Dimmer (ZMNHDD)
The temperature changed
Flush Dimmer (ZMNHDD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 turned on
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer (ZMNHDD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings for more information.
Flush Dimmer 0 - 10V (ZMNHVD)
Turned on
Flush Dimmer 0 - 10V (ZMNHVD)
Turned off
Flush Dimmer 0 - 10V (ZMNHVD)
Dim-level changed
Flush Dimmer 0 - 10V (ZMNHVD)
The temperature changed
Flush Heat & Cool Thermostat (ZMNHKD)
The target temperature changed
Flush Heat & Cool Thermostat (ZMNHKD)
The temperature changed
Flush Heat & Cool Thermostat (ZMNHKD)
The power meter changed
Flush Heat & Cool Thermostat (ZMNHKD)
The power changed
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush Heat & Cool Thermostat (ZMNHKD)
Thermostat mode changed to Thermostat mode
Flush On/Off Thermostat (ZMNHIA)
The target temperature changed
Flush On/Off Thermostat (ZMNHIA)
The temperature changed
Flush On/Off Thermostat (ZMNHIA)
The power meter changed
Flush On/Off Thermostat (ZMNHIA)
The power changed
Flush On/Off Thermostat (ZMNHIA)
Input 2 turned on
Flush On/Off Thermostat (ZMNHIA)
Input 2 turned off
Flush On/Off Thermostat (ZMNHIA)
Input 2 was toggled
Flush On/Off Thermostat (ZMNHIA)
Input 3 turned on
Flush On/Off Thermostat (ZMNHIA)
Input 3 turned off
Flush On/Off Thermostat (ZMNHIA)
Input 3 was toggled
Flush On/Off Thermostat (ZMNHIA)
Thermostat mode changed to Thermostat mode
Flush On/Off Thermostat (ZMNHID)
The target temperature changed
Flush On/Off Thermostat (ZMNHID)
The temperature changed
Flush On/Off Thermostat (ZMNHID)
The power meter changed
Flush On/Off Thermostat (ZMNHID)
The power changed
Flush On/Off Thermostat (ZMNHID)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush On/Off Thermostat (ZMNHID)
Thermostat mode changed to Thermostat mode
Flush On/Off Thermostat 2 (ZMNKID)
The target temperature changed
Flush On/Off Thermostat 2 (ZMNKID)
The temperature changed
Flush On/Off Thermostat 2 (ZMNKID)
The power meter changed
Flush On/Off Thermostat 2 (ZMNKID)
The power changed
Flush On/Off Thermostat 2 (ZMNKID)
Thermostat mode changed to Thermostat mode
Flush PWM Thermostat (ZMNHLD)
The target temperature changed
Flush PWM Thermostat (ZMNHLD)
The temperature changed
Flush PWM Thermostat (ZMNHLD)
The power meter changed
Flush PWM Thermostat (ZMNHLD)
The power changed
Flush PWM Thermostat (ZMNHLD)
Input 1 turned on
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 1 turned off
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 1 was toggled
i
This Flow Trigger is only active if input 1 is enabled on the device, please see the device settings (parameter 100 and 11) for more information. Note: input 1 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 turned off
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 2 was toggled
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 turned on
i
This Flow Trigger is only active if input 2 is enabled on the device, please see the device settings (parameter 101 and 12) for more information. Note: input 2 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 turned off
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Input 3 was toggled
i
This Flow Trigger is only active if input 3 is enabled on the device, please see the device settings (parameter 102 and 13) for more information. Note: input 3 needs to be switched once before it will report its status correctly.
Flush PWM Thermostat (ZMNHLD)
Thermostat mode changed to Thermostat mode
Flush RGBW Dimmer (ZMNHWD)
Turned on
Flush RGBW Dimmer (ZMNHWD)
Turned off
Flush RGBW Dimmer (ZMNHWD)
Dim-level changed
Flush Shutter (ZMNHCD)
Position changed
Flush Shutter (ZMNHCD)
The power meter changed
Flush Shutter (ZMNHCD)
The power changed
Flush Shutter (ZMNHCD)
The temperature changed
Flush Shutter DC (ZMNHOD)
Position changed
Flush Shutter DC (ZMNHOD)
The power meter changed
Flush Shutter DC (ZMNHOD)
The power changed
Flush Shutter DC (ZMNHOD)
The temperature changed
HC Shutter FM
Position changed
HC Shutter FM
The power meter changed
HC Shutter FM
The power changed
HC Shutter FM
The temperature changed
LUXY Smart Light (ZMNHQD)
Turned on
LUXY Smart Light (ZMNHQD)
Turned off
LUXY Smart Light (ZMNHQD)
Dim-level changed
LUXY Smart Light (ZMNHQD)
Volume changed
LUXY Smart Light (ZMNHQD)
Buzzer turned on
LUXY Smart Light (ZMNHQD)
Buzzer turned off
LUXY Smart Light (ZMNHQD)
Alarm mode turned off
LUXY Smart Light (ZMNHQD)
Alarm mode turned off
LUXY Smart Switch (ZMNKAD)
Turned on
LUXY Smart Switch (ZMNKAD)
Turned off
LUXY Smart Switch (ZMNKAD)
Dim-level changed
LUXY Smart Switch (ZMNKAD)
Alarm mode turned off [[device]]
LUXY Smart Switch (ZMNKAD)
Alarm mode turned off [[device]]
Mini Dimmer (ZMNHHD)
Turned on
Mini Dimmer (ZMNHHD)
Turned off
Mini Dimmer (ZMNHHD)
Dim-level changed
Mini Dimmer (ZMNHHD)
The power meter changed
Mini Dimmer (ZMNHHD)
The power changed
Smart Meter (ZMNHTD)
The voltage changed
Smart Meter (ZMNHTD)
The electric current changed
Smart Meter (ZMNHTD)
The power changed
Smart Plug (ZMNHYD)
The voltage changed
Smart Plug (ZMNHYD)
The electric current changed
Smart Plug (ZMNHYD)
The power changed
Smart Plug (ZMNHYD)
The power meter changed
Smart Plug (ZMNHYD)
Turned on
Smart Plug (ZMNHYD)
Turned off

And...

DIN Dimmer (ZMNHSD)
Is turned on
Flush 1 Relay (ZMNHAA)
Is turned on
Flush 1 Relay (ZMNHAD)
Is turned on
Flush 1D Relay (ZMNHND)
Is turned on
Flush 2 Relay (ZMNHBA)
Is turned on
Flush Dimmer (ZMNHDA)
Is turned on
Flush Dimmer (ZMNHDD)
Is turned on
Flush Dimmer 0 - 10V (ZMNHVD)
Is turned on
Flush RGBW Dimmer (ZMNHWD)
Is turned on
LUXY Smart Light (ZMNHQD)
Is turned on
LUXY Smart Switch (ZMNKAD)
Is turned on
Mini Dimmer (ZMNHHD)
Is turned on
Smart Plug (ZMNHYD)
Is turned on

Then...

3-Phase Smart Meter (ZMNHXD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
DIN Dimmer (ZMNHSD)
Turn on
DIN Dimmer (ZMNHSD)
Turn off
DIN Dimmer (ZMNHSD)
Toggle on or off
DIN Dimmer (ZMNHSD)
Dim to %
DIN Dimmer (ZMNHSD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
DIN Dimmer (ZMNHSD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1 Relay (ZMNHAA)
Turn on
Flush 1 Relay (ZMNHAA)
Turn off
Flush 1 Relay (ZMNHAA)
Toggle on or off
Flush 1 Relay (ZMNHAA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1 Relay (ZMNHAD)
Turn on
Flush 1 Relay (ZMNHAD)
Turn off
Flush 1 Relay (ZMNHAD)
Toggle on or off
Flush 1 Relay (ZMNHAD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 1D Relay (ZMNHND)
Turn on
Flush 1D Relay (ZMNHND)
Turn off
Flush 1D Relay (ZMNHND)
Toggle on or off
Flush 2 Relay (ZMNHBA)
Turn on
Flush 2 Relay (ZMNHBA)
Turn off
Flush 2 Relay (ZMNHBA)
Toggle on or off
Flush 2 Relay (ZMNHBA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush 2 Relay (ZMNHBD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer (ZMNHDA)
Turn on
Flush Dimmer (ZMNHDA)
Turn off
Flush Dimmer (ZMNHDA)
Toggle on or off
Flush Dimmer (ZMNHDA)
Dim to %
Flush Dimmer (ZMNHDA)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Dimmer (ZMNHDA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer (ZMNHDD)
Turn on
Flush Dimmer (ZMNHDD)
Turn off
Flush Dimmer (ZMNHDD)
Toggle on or off
Flush Dimmer (ZMNHDD)
Dim to %
Flush Dimmer (ZMNHDD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Dimmer (ZMNHDD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Dimmer 0 - 10V (ZMNHVD)
Turn on
Flush Dimmer 0 - 10V (ZMNHVD)
Turn off
Flush Dimmer 0 - 10V (ZMNHVD)
Toggle on or off
Flush Dimmer 0 - 10V (ZMNHVD)
Dim to %
Flush Dimmer 0 - 10V (ZMNHVD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush Dimmer 0 - 10V (ZMNHVD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Heat & Cool Thermostat (ZMNHKD)
Set the temperature °C
Flush Heat & Cool Thermostat (ZMNHKD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Heat & Cool Thermostat (ZMNHKD)
Change thermostat mode to Thermostat mode
Flush On/Off Thermostat (ZMNHIA)
Set the temperature °C
Flush On/Off Thermostat (ZMNHIA)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat (ZMNHIA)
Change thermostat mode to Thermostat mode
Flush On/Off Thermostat (ZMNHID)
Set the temperature °C
Flush On/Off Thermostat (ZMNHID)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat (ZMNHID)
Change thermostat mode to Thermostat mode
Flush On/Off Thermostat 2 (ZMNKID)
Set the temperature °C
Flush On/Off Thermostat 2 (ZMNKID)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush On/Off Thermostat 2 (ZMNKID)
Change thermostat mode to Thermostat mode
Flush PWM Thermostat (ZMNHLD)
Set the temperature °C
Flush PWM Thermostat (ZMNHLD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush PWM Thermostat (ZMNHLD)
Change thermostat mode to Thermostat mode
Flush RGBW Dimmer (ZMNHWD)
Turn on
Flush RGBW Dimmer (ZMNHWD)
Turn off
Flush RGBW Dimmer (ZMNHWD)
Toggle on or off
Flush RGBW Dimmer (ZMNHWD)
Dim to %
Flush RGBW Dimmer (ZMNHWD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Flush RGBW Dimmer (ZMNHWD)
Set the hue °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
Flush RGBW Dimmer (ZMNHWD)
Set a color ...
Flush RGBW Dimmer (ZMNHWD)
Set a random color
Flush RGBW Dimmer (ZMNHWD)
Set the saturation %
Flush RGBW Dimmer (ZMNHWD)
Set a temperature %
i
Adjusts the temperature of the light. A higher value means a warmer color.
Flush Shutter (ZMNHCD)
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Flush Shutter (ZMNHCD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Flush Shutter DC (ZMNHOD)
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
Flush Shutter DC (ZMNHOD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
HC Shutter FM
Set the position to %
i
Change the position to open (100%), closed (0%), or a value in between.
HC Shutter FM
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
LUXY Smart Light (ZMNHQD)
Turn on
LUXY Smart Light (ZMNHQD)
Turn off
LUXY Smart Light (ZMNHQD)
Toggle on or off
LUXY Smart Light (ZMNHQD)
Dim to %
LUXY Smart Light (ZMNHQD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
LUXY Smart Light (ZMNHQD)
Set the hue °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
LUXY Smart Light (ZMNHQD)
Set a color ...
LUXY Smart Light (ZMNHQD)
Set a random color
LUXY Smart Light (ZMNHQD)
Set the saturation %
LUXY Smart Light (ZMNHQD)
Set volume to %
LUXY Smart Light (ZMNHQD)
Set relative volume %
i
Change the volume with respect to the device's current volume.
LUXY Smart Light (ZMNHQD)
Turn on buzzer
LUXY Smart Light (ZMNHQD)
Turn buzzer off
LUXY Smart Switch (ZMNKAD)
Turn on
LUXY Smart Switch (ZMNKAD)
Turn off
LUXY Smart Switch (ZMNKAD)
Toggle on or off
LUXY Smart Switch (ZMNKAD)
Dim to %
LUXY Smart Switch (ZMNKAD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
LUXY Smart Switch (ZMNKAD)
Set the hue °
i
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
LUXY Smart Switch (ZMNKAD)
Set a color ...
LUXY Smart Switch (ZMNKAD)
Set a random color
LUXY Smart Switch (ZMNKAD)
Set the saturation %
Mini Dimmer (ZMNHHD)
Turn on
Mini Dimmer (ZMNHHD)
Turn off
Mini Dimmer (ZMNHHD)
Toggle on or off
Mini Dimmer (ZMNHHD)
Dim to %
Mini Dimmer (ZMNHHD)
Set relative dim-level %
i
Dim or brighten with respect to the device's current dim-level.
Mini Dimmer (ZMNHHD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Smart Meter (ZMNHTD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.
Smart Plug (ZMNHYD)
Turn on
Smart Plug (ZMNHYD)
Turn off
Smart Plug (ZMNHYD)
Toggle on or off
Smart Plug (ZMNHYD)
Reset power meter
i
Reset the accumulated power usage (kWh), note that this can not be reversed.

Support

Having an issue with this app? Contact the developer here.

What's new

Version 4.1.6 — added HC Shutter FM (MT 02761)

View changelog

Qubino

Qubino is not compatible with the selected Homey.

Qubino will install on Homey shortly.
Install App