Air conditioner
Temperaturen ändrades
Mitsubishi (WF-RAC)
Cooling, heating and ventilation
Now control your Mitsubishi Heavy Industries air conditioner from anywhere with Homey.
Check the temperature in your room(s) while on the move. If necessary, turn on your air conditioner before you get home. You don't remember if you turned off the air conditioner? Then switch off your air conditioner via Homey.
For the correct operation of this Homey App, it is necessary that your air conditioner is equipped with a WF-RAC WiFi adapter which is already configured via the Smart-M-Air app.
This Homey App is NOT SUITABLE for models equipped with the newer INWFIMHI001I000 WiFi adapter which is configured via the AC-Cloud app.
IMPORTANT: Make sure the air conditioners have static IP addresses on your local network.
Enheter som stöds
Flow-kort
Klicka på en enhet ovan för att visa endast relaterade Flow-kort.
När...
Air conditioner
Måltemperaturen ändrades
Air conditioner
Aktiverad
Air conditioner
Inaktiverad
Air conditioner
3D AUTO turned off
This flowcard triggers when 3D AUTO was turned off.
Air conditioner
3D AUTO turned on
This flowcard triggers when 3D AUTO was turned on.
Air conditioner
Fan speed changed
This flowcard triggers when the fan speed was changed.
Air conditioner
Horizontal airflow changed
This flowcard triggers when the horizontal airflow was changed.
Air conditioner
Operating mode changed
This flowcard triggers when the operating mode was changed.
Air conditioner
Vertical airflow changed
This flowcard triggers when the vertical airflow was changed.
Och...
Air conditioner
Är på
Air conditioner
3D AUTO is turned on
Air conditioner
Fan speed is speed
Air conditioner
Horizontal airflow is position
Air conditioner
Operating mode is mode
Air conditioner
Vertical airflow is position
Då...
Air conditioner
Ställ in temperaturen °C
Air conditioner
Aktivera
Air conditioner
stäng av
Air conditioner
Växla på och av
Air conditioner
Turn off 3D AUTO
Use this flowcard to turn off 3D AUTO.
Air conditioner
Turn on 3D AUTO
Use this flowcard to turn on 3D AUTO.
Air conditioner
Set fan speed to speed
Use this flowcard to change the fan speed.
Air conditioner
Set horizontal airflow to position
Use this flowcard to change the horizontal airflow.
Air conditioner
Set operating mode to mode
Use this flowcard to change the operating mode.
Air conditioner
Set vertical airflow to position
Use this flowcard to change the vertical airflow.
Support
Har du problem med den här appen? Kontakta utvecklaren här.
Vad är nytt?
Version 1.1.0 — Commands are now batched per 500ms to prevent filling up the queue.
Mitsubishi (WF-RAC)
Mitsubishi (WF-RAC) är inte kompatibelt med vald Homey.
Mitsubishi (WF-RAC) installeras på Homey inom kort.
Ändringslogg
Vi kommer att skicka en tacksamhet till Edwin van de Pol!
Vi låter Edwin van de Pol veta att du älskar appen. Överväg att stödja Edwin van de Pol genom att göra en donation?
Donera till Edwin van de Pol
Utvecklaren av Mitsubishi (WF-RAC) tar emot donationer.
Gör en donation för att tacka!
