HM-CC-RT-DN
Zmiana celu temperatury
Homematic
Connect Homematic with Homey
***** This app is still in Beta *****
Homematic
This app adds support for Homematic device in Homey via the CCU2/CCU3/RaspberryMatic
What works:
Devices can be connected via the following interfaces to the CCU:
BidCos
Homematic IP
CUxD
MQTT
As of 0.15.0 the app also supports the connection to the CCU via MQTT. This feature is currently cosidered experimental. The reason it is considered experimental is that it might be required to make some changes on the CCU in future versions of the app which could cause the app not to work until the changes are implemented.
It depends on RedMatic (Node Red) and Mosquitto (MQTT broker) to be configured on the CCU and therefore only supports the CCU3 ud RaspberryMatic.
The implementation is fully compatible with the existing devices that have been paired before it was enabled. It is also possible to switch back to the old mode without requiring to pair devices again.
MQTT is more stable than the connection via RPC as used otherwise. It also fixes the issue that some users have been experiencing where the devices stopped working after some time and a restart of the app was required to fix it. The performance is also increased which means that switch operations as executed faster and more reliable.
See the Wiki for a detailed description on setting it up.
I recommend not to enable the auto update of this app in Homey and always check this page to make sure that no action is required before updating the app.
If you encounter any issues then please open an issue on GitHub.
If you have a device that is not supported currently then please open an issue on github and we will look into it.
The app uses discovery to find your CCUs on the network. We were only able to test it with a single CCU yet. Therefore it is possible that the app fails in case multiple CCUs are discovered on the network.
Credits
Thank you @hobbyquaker for your great work on binrpc, xmlrpc, hm-discover and RedMatic.
Obsługiwane urządzenia
Karty Flow
Kliknij na urządzenie powyżej, aby wyświetlić tylko powiązane karty Flow.
Kiedy...
HM-CC-RT-DN
Zmiana temperatury
HM-CC-RT-DN
Alarm stanu baterii włączony
HM-CC-RT-DN
Alarm stanu baterii wyłączony
HM-OU-LED16
Button Button Press Type Event
HM-PB-2-FM
Button Button Press Type Event
HM-PB-2-WM55-2
Button Button Press Type Event
HM-PB-4-WM
Button Button Press Type Event
HM-PB-6-WM55
Button Button Press Type Event
HM-PBI-4-FM
Button Button Press Type Event
HM-RC-4
Button Button Press Type Event
HM-RC-4-2
Button Button Press Type Event
HM-RC-4-3
Button Button Press Type Event
HM-RC-8
Button Button Press Type Event
HM-RC-Key4-2
Button Button Press Type Event
HM-RC-Key4-3
Button Button Press Type Event
HM-RC-Sec4-3
Button Button Press Type Event
HM-Sec-RHS
Handle state changed: State
HM-Sec-WDS
Water state changed: Water State
HM-Sen-DB-PCB
Button Button Press Type Event
HM-Sen-MDIR-WM55
Button Button Press Type Event
HM-Sen-RD-O
Włączone
HM-Sen-RD-O
Wyłączone
HM-Sen-RD-O
Rain start
HM-Sen-RD-O
Rain stop
HM-SwI-3-FM
Button 1 Pressed
HM-SwI-3-FM
Button 2 Pressed
HM-SwI-3-FM
Button 3 Pressed
HM-TC-IT-WM-W-EU
Zmiana celu temperatury
HM-TC-IT-WM-W-EU
Zmiana temperatury
HM-TC-IT-WM-W-EU
Alarm stanu baterii włączony
HM-TC-IT-WM-W-EU
Alarm stanu baterii wyłączony
HM-TC-IT-WM-W-EU
Zmiana wilgotności
HmIP-BDT
Button Button Press Type Event
HmIP-BRA
Button Button Press Type Event
HmIP-BRC2
Button Button Press Type Event
HmIP-BROLL
Button Button Press Type Event
HmIP-BSM
Button Button Press Type Event
HmIP-BWTH
Zmiana celu temperatury
HmIP-BWTH
Zmiana temperatury
HmIP-BWTH
Zmiana wilgotności
HMIP-eTRV
Zmiana celu temperatury
HMIP-eTRV
Zmiana temperatury
HmIP-eTRV-2
Zmiana celu temperatury
HmIP-eTRV-2
Zmiana temperatury
HmIP-eTRV-B
Zmiana celu temperatury
HmIP-eTRV-B
Zmiana temperatury
HmIP-eTRV-C
Zmiana celu temperatury
HmIP-eTRV-C
Zmiana temperatury
HmIP-FBL
Button Button Press Type Event
HmIP-FROLL
Button Button Press Type Event
HmIP-RC8
Button Button Press Type Event
HmIP-SLO
Current Illuminance changed
HmIP-SLO
Average Illuminance changed
HmIP-SLO
Highest Illuminance changed
HmIP-SLO
Lowest Illuminance changed
HmIP-SMI55
Button Button Press Type Event
HmIP-SRH
Handle state changed: State
HmIP-STE2-PCB
Zmiana temperatury
HmIP-STH
Zmiana celu temperatury
HmIP-STH
Zmiana temperatury
HmIP-STH
Zmiana wilgotności
HmIP-STHD
Zmiana celu temperatury
HmIP-STHD
Zmiana temperatury
HmIP-STHD
Zmiana wilgotności
HmIP-STHO
Zmiana temperatury
HmIP-STHO
Zmiana wilgotności
HmIP-SWSD
Alarm state changed: State
HMIP-WRC2
Button Button Press Type Event
HmIP-WRC6
Button Button Press Type Event
HMIP-WTH
Zmiana celu temperatury
HMIP-WTH
Zmiana temperatury
HMIP-WTH
Zmiana wilgotności
Oraz...
HM-CC-RT-DN
The battery alarm is on
HM-Sen-RD-O
Jest włączone
HM-TC-IT-WM-W-EU
The battery alarm is on
Wtedy...
HM-CC-RT-DN
Ustaw temperaturę °C
HM-OU-LED16
Set LED Status: LED Status
HM-PB-4-WM
Naciśnij przycisk
HM-Sec-Sir-WM
Arm state: Alarm Status
HM-Sen-RD-O
Włącz
HM-Sen-RD-O
Wyłącz
HM-Sen-RD-O
Przełącz na wł. lub wył.
HM-TC-IT-WM-W-EU
Ustaw temperaturę °C
HmIP-BWTH
Ustaw temperaturę °C
HMIP-eTRV
Ustaw temperaturę °C
HMIP-eTRV
Set Week Profile: Week Profile
HMIP-eTRV
Set Mode: Mode
HmIP-eTRV-2
Ustaw temperaturę °C
HmIP-eTRV-2
Set Week Profile: Week Profile
HmIP-eTRV-2
Set Mode: Mode
HmIP-eTRV-B
Ustaw temperaturę °C
HmIP-eTRV-B
Set Week Profile: Week Profile
HmIP-eTRV-B
Set Mode: Mode
HmIP-eTRV-C
Ustaw temperaturę °C
HmIP-eTRV-C
Set Week Profile: Week Profile
HmIP-eTRV-C
Set Mode: Mode
HmIP-MOD-HO
Set Ventialition
HmIP-STH
Ustaw temperaturę °C
HmIP-STHD
Ustaw temperaturę °C
HMIP-WTH
Ustaw temperaturę °C
Pomoc
Masz problem z tą aplikacją? Skontaktuj się z twórcami aplikacji za pomocą forum Homey Community.
Nowości
Wersja 0.19.1 — Fix errors in HmIP-BDT and HmIP-FDT and fix api.
Homematic
Homematic nie jest kompatybilna z wybranym Homey.
Homematic zostanie wkrótce zainstalowana na Homey.
Lista zmian
Wyślemy podziękowanie do WebArray .!
Poinformujemy WebArray ., że uwielbiasz tę aplikację.
