CountDown

Ralf van Dooren

Gebruik CountDown timers als zandloper om af te tellen naar een actie in een flow

This is a CountDown app which you can use to initiate flows. Examples: When motion is detected, turn on light and start a timer for 90 seconds After 11 seconds, when motion is detected again, restart the timer for 90 seconds When the timer reaches 0, there was no motion for 90 seconds, turn off the light. Settings After installing the application, first visit the Homey Settings and navigate to the 'CountDown' application. There you can add/delete CountDown timers. If you see a value '-1', this means the countdown timer is not active and waiting to be set ( via an action card in the flow ) Flow support -Triggers- There are 6 triggers 1) When a CountDown timer reaches 0. This will be the most used trigger. 2) When a CountDown timer has started 3) When a CountDown timer has stopped before reaching 0. 4) When a CountDown timer has changed its value (by running) 5) When a CountDown timer has been updated via a flow or manually (while running) 6) A combination of 2 and 5 ; so either started or changed via flow/manually -Actions- There are 5 actions: - Start CountDown timer: set a value and a number (in seconds) - Start random CountDown timer: set a value and a range (inclusive); when action starts, it will randomly selected a number between 'min' and 'max' (including those numbers) and start the CountDown timer - Adjust CountDown timer: increase or decrease (with negative numbers) a running CountDown timer - Stop CountDown timer: the CountDown timer will be stopped (and reset) - Stop all CountDown timers: All CountDown timers will be stopped (and reset) -Conditions- There are 4 condition cards: - Timer is (not) running: check whether a timer is running (or not) - Timer is (not) exactly value: to be used in combination with the 'value changed' trigger card. You can use this to check if a CountDown timer has reached a certain value. - Timer is less/greater than: check if a CountDown timer has a value less/greater than a specified value Acknowledgements The CountDown app is heavily influenced and inspired by the BetterLogic app. The Condition card was suggested (and code provided) by GeurtDijker The Start/Stop triggers cards were suggested by MarkSwift Import / Export code by Patrick Sannes ( Better Logic app ) The trigger/condition combination for checking a value was suggested by YvesGeffens Readable format of timer dates in settings menu was provided by jghaanstra Greater than/less than conditions was coded by Petter Alstermark Donate If you like the app, consider a donation to support development
What's new in v2.0.6
Fixed trigger issue if timer had a decimal in it

Flow kaarten

Als...

CountDown
Zandloper leeg Zandloper naam
CountDown
Zandloper is gestart Zandloper naam
CountDown
Zandloper is bijgewerkt Zandloper naam
CountDown
Zandloper is gestart of bijgewerkt Zandloper naam
CountDown
Zandloper is gestopt Zandloper naam
CountDown
Zandloper waarde is veranderd Zandloper naam

En...

CountDown
Zandloper loopt niet Zandloper naam
CountDown
Zandloper is precies Zandloper naam waarde
CountDown
Zandloper is kleiner dan Zandloper naam waarde
CountDown
Zandloper is groter dan Zandloper naam waarde

Dan...

CountDown
Start zandloper naam seconden
CountDown
Zandloper met willekeurige eindtijd naam min. seconden max. seconden
CountDown
Pas zandloper aan naam seconden
CountDown
Stop zandloper naam
CountDown
Stop alle zandlopers

Recensies

Deze app heeft nog geen recensies.

Je kunt een recensie achterlaten als je deze app gebruikt.

Bedankt voor je recensie.

Recensie opslaan

Schrijf een recensie

Ondersteuning

Heb je een probleem met deze app? Neem contact op met de ontwikkelaar per e-mail.

Installeer CountDown op

CountDown wordt binnenkort op Homey geïnstalleerd.

Installeren

Mis geen enkele update over Homey

Meld je aan voor onze nieuwsbrief en blijf up-to-date over Homey's functies en ontwikkelingen.