EV Charger
Aangezet
Victron Energy
Blue Power
Instantly monitor the battery state of charge, power consumption, power harvest from PV, and mains. Create a flow to get notified if there is an alarm or a warning.
Build control flows to disable or limit the power of the inverter if a car is charging. Easily control the switch position (mode) of your system; Charger Only, Inverter Only, On or Off. All Victron Energy Storage Systems (ESS) standard actions are supported.
Ondersteunde apparaten
Flow kaarten
Klik op een apparaat hierboven om gerelateerde Flow kaarten te zien.
Als...
EV Charger
Uitgezet
EV Charger
Het vermogen is veranderd
EV Charger
De elektrische stroom is veranderd
EV Charger
De stroommeter is veranderd
EV Charger
Status changed to [[status]]
Tank sensor
Status changed to [[status]]
Tank sensor
Tank level changed to [[level]]
Temperature sensor
De temperatuur verandert
Temperature sensor
De luchtvochtigheid is veranderd
Temperature sensor
De druk is veranderd
Temperature sensor
Het voltage is veranderd
Temperature sensor
Status changed to [[status]]
Victron GX
Het accuniveau is veranderd
Victron GX
Het vermogen is veranderd
Victron GX
De stroommeter is veranderd
Victron GX
Alarm status changed to [[status]] with [[alarms]] and [[warnings]]
Victron GX
Battery status changed to [[status]]
Victron GX
Battery voltage changed to [[voltage]]
Victron GX
Grid surplus changed to [[power]] / [[single_phase]] / [[three_phase]]
Victron GX
Input source changed to [[source]]
Victron GX
Switch position changed
Victron GX
VE Bus status changed to [[status]]
En...
EV Charger
Is aan
Victron GX
AC inputs are below Power (W)
Victron GX
AC loads are below Power (W)
Victron GX
AC outputs are below Power (W)
Victron GX
Battery power is below Power (W)
Victron GX
Battery status is Status
Victron GX
Max charge current is Condition Current (A)
Victron GX
Consumption power is below Power (W)
Victron GX
Excess solar power is below Power (W)
Victron GX
Max grid feed-in power is Condition Power (W)
Victron GX
Grid power is below Power (W)
Victron GX
Grid setpoint is Condition Power (W)
Victron GX
Input source is Source
Victron GX
Max discharge power is Condition Power (W)
Victron GX
Min SoC is Condition SoC (%)
Victron GX
Scheduled charging is enabled for schedule Schedule
Victron GX
Solar power is below Power (W)
Victron GX
Switch position is Mode
Victron GX
Time since last full charge is less than Time (seconds)
Victron GX
VE Bus status is Status
Dan...
EV Charger
Zet aan
EV Charger
Zet uit
EV Charger
Schakel aan of uit
EV Charger
Set EV charger max current to Current (A)
Used for chargers in manual mode. Sets the maximum charge current
EV Charger
Set EV charger mode to Mode
Victron GX
Create charging schedule Schedule for Day at Start time with duration Duration or SoC SoC
Creates a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Disable charging schedule Schedule
Disables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Enable charging schedule Schedule
Enables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Limit charge current to Current (A)
Sets the maximum charge current (defined under the DVCC section).
Victron GX
Limit grid feed-in power to Power (W)
Victron GX
Limit discharge power to Power (W)
Sets the maximum inverter power (defined under ESS).
Victron GX
Set batteryLife state to Mode
Victron GX
Set multiphase regulation state to Mode
Victron GX
Switch relay 1 to State
Victron GX
Switch relay 2 to State
Victron GX
Set switch position to Mode
Victron GX
Update grid setpoint to Power (W)
Sets the grid setpoint (defined under ESS).
Victron GX
Update minimum SoC to SoC (%)
Sets the minimum SoC, unless grid fails (defined under ESS).
Ondersteuning
Heb je een probleem met deze app? Neem contact op met de ontwikkelaar, klik hier.
Wat is nieuw
Versie 1.3.1 — New device for the EV Chargers. New icons for the different device types.
Victron Energy
Victron Energy is niet compatibel met de geselecteerde Homey
Victron Energy wordt op Homey geïnstalleerd.
Changelog
We sturen een bedankje naar Richard Barkestam!
We laten Richard Barkestam weten dat je dol bent op de app. Overweeg om Richard Barkestam te ondersteunen door een donatie te maken?
Doneer aan Richard Barkestam
De ontwikkelaar van Victron Energy accepteert donaties.
Support de ontwikkelaar en doe een donatie!
Je voorstel is verzonden
We laten Richard Barkestam weten dat je een voorstel hebt verzonden.
