ID Lock 101 (Z-Wave)
Chiusa
ID Lock Next
Modern control for ID Lock smart locks over Z-Wave and Zigbee.
Attenzione! Questa app potrebbe non funzionare correttamente.
Questa app è in fase di test e non è mai stata recensita. Potrebbe non funzionare come previsto.
Fai molta attenzione quando installi questa app.
ID Lock Next brings modern, reliable control of your ID Lock smart door lock to Homey Pro. It is a ground-up, independent app that speaks both Z-Wave and Zigbee through a single, protocol-agnostic core — so the same features and the same settings work no matter which module your lock uses.
Lock and unlock from Homey, see who opened the door and how, manage the PIN codes for your household, get notified about important events, and tie it all together with flows.
Supported locks:
• ID Lock 150 — Z-Wave or Zigbee
• ID Lock 202 — Z-Wave or Zigbee (shares the 150's swappable module)
• ID Lock 101 — Z-Wave
Features:
• Lock and unlock, with door open/closed and battery status
• Tamper and heat alarms
• "Who unlocked, and how" — PIN, RFID, manual or automatic — as capabilities and flow tokens
• User and PIN management: add, change and clear codes, change the master PIN (Z-Wave), and import/export your user list
• Reliable, queue-based PIN synchronization that respects battery-powered locks, with per-user synced / pending / failed status
• Notifications for lock events and an in-app activity log
• A diagnostics dashboard with a health overview and a downloadable report
• A modern, accessible settings interface — Overview, Users, Sync, Notifications and Diagnostics
• Flow triggers for locked, unlocked and jammed events, carrying who and how
• Flow actions and conditions: set home/away and auto-lock mode, manage the service PIN (Z-Wave), refresh from the lock, and check who last locked or unlocked
• Away mode with a device toggle, a status tile and Flow triggers — kept in sync with the keypad (code + *)
• Lock settings in the device's Advanced Settings: auto-lock, relock, sound volume, hinge direction and more
• Official ID Lock firmware updates for the Z-Wave module, installed through Homey
• Fully available in English, Norwegian and Swedish
This is a TEST release. The full feature set is implemented; the Z-Wave and Zigbee modules for the 150 are developed against real hardware, while the 101 and 202 reuse the same command classes and are awaiting a hardware smoke-test — so expect rough edges and please report anything you run into. Still on the roadmap: making codes added at the lock's keypad visible in the user list.
This is an independent, community project. It is not affiliated with, endorsed by, or supported by ID Lock AS, and "ID Lock" is a trademark of its respective owner. A door lock is a security device — test changes carefully and use at your own risk.
Dispositivi supportati
Schede dei Flow
Clicca su un dispositivo qui sopra per visualizzare solo le schede dei Flow correlate.
Quando...
ID Lock 101 (Z-Wave)
Aperta
ID Lock 101 (Z-Wave)
L'allarme di contatto è stato attivato
ID Lock 101 (Z-Wave)
L'allarme di contatto è stato disattivato
ID Lock 101 (Z-Wave)
Il livello della batteria è cambiato
ID Lock 101 (Z-Wave)
L'allarme della batteria è stato attivato
ID Lock 101 (Z-Wave)
L'allarme della batteria è stato disattivato
ID Lock 101 (Z-Wave)
L'allarme manomissione è stato attivato
ID Lock 101 (Z-Wave)
L'allarme manomissione è stato disattivato
ID Lock 101 (Z-Wave)
L'allarme di calore è stato attivato
ID Lock 101 (Z-Wave)
L'allarme di calore è stato disattivato
ID Lock 101 (Z-Wave)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 101 (Z-Wave)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 101 (Z-Wave)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 101 (Z-Wave)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 101 (Z-Wave)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 101 (Z-Wave)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
ID Lock 101 (Z-Wave)
The service PIN expired
Fires when the temporary service PIN stops being valid — its uses ran out or its time window ended.
ID Lock 101 (Z-Wave)
Too many wrong codes were entered
Fires when the lock temporarily disables its keypad after repeated wrong PIN attempts — a possible break-in attempt. Z-Wave only.
ID Lock 150 / 202 (Z-Wave)
Chiusa
ID Lock 150 / 202 (Z-Wave)
Aperta
ID Lock 150 / 202 (Z-Wave)
L'allarme di contatto è stato attivato
ID Lock 150 / 202 (Z-Wave)
L'allarme di contatto è stato disattivato
ID Lock 150 / 202 (Z-Wave)
Il livello della batteria è cambiato
ID Lock 150 / 202 (Z-Wave)
L'allarme della batteria è stato attivato
ID Lock 150 / 202 (Z-Wave)
L'allarme della batteria è stato disattivato
ID Lock 150 / 202 (Z-Wave)
L'allarme manomissione è stato attivato
ID Lock 150 / 202 (Z-Wave)
L'allarme manomissione è stato disattivato
ID Lock 150 / 202 (Z-Wave)
L'allarme di calore è stato attivato
ID Lock 150 / 202 (Z-Wave)
L'allarme di calore è stato disattivato
ID Lock 150 / 202 (Z-Wave)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Z-Wave)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 150 / 202 (Z-Wave)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 150 / 202 (Z-Wave)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 150 / 202 (Z-Wave)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 150 / 202 (Z-Wave)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
ID Lock 150 / 202 (Z-Wave)
The service PIN expired
Fires when the temporary service PIN stops being valid — its uses ran out or its time window ended.
ID Lock 150 / 202 (Z-Wave)
Too many wrong codes were entered
Fires when the lock temporarily disables its keypad after repeated wrong PIN attempts — a possible break-in attempt. Z-Wave only.
ID Lock 150 / 202 (Zigbee)
Chiusa
ID Lock 150 / 202 (Zigbee)
Aperta
ID Lock 150 / 202 (Zigbee)
L'allarme di contatto è stato attivato
ID Lock 150 / 202 (Zigbee)
L'allarme di contatto è stato disattivato
ID Lock 150 / 202 (Zigbee)
Il livello della batteria è cambiato
ID Lock 150 / 202 (Zigbee)
L'allarme della batteria è stato attivato
ID Lock 150 / 202 (Zigbee)
L'allarme della batteria è stato disattivato
ID Lock 150 / 202 (Zigbee)
L'allarme manomissione è stato attivato
ID Lock 150 / 202 (Zigbee)
L'allarme manomissione è stato disattivato
ID Lock 150 / 202 (Zigbee)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Zigbee)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 150 / 202 (Zigbee)
The door was forced open
Fires when the lock reports the door was opened without unlocking (forced open). Zigbee locks only.
ID Lock 150 / 202 (Zigbee)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 150 / 202 (Zigbee)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 150 / 202 (Zigbee)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 150 / 202 (Zigbee)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
E...
ID Lock 101 (Z-Wave)
Una serratura è chiusa
ID Lock 101 (Z-Wave)
L'allarme di contatto è acceso
ID Lock 101 (Z-Wave)
L'allarme della batteria è acceso
ID Lock 101 (Z-Wave)
L'allarme manomissione è acceso
ID Lock 101 (Z-Wave)
L'allarme di calore è acceso
ID Lock 101 (Z-Wave)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 101 (Z-Wave)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 101 (Z-Wave)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 101 (Z-Wave)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
ID Lock 150 / 202 (Z-Wave)
Una serratura è chiusa
ID Lock 150 / 202 (Z-Wave)
L'allarme di contatto è acceso
ID Lock 150 / 202 (Z-Wave)
L'allarme della batteria è acceso
ID Lock 150 / 202 (Z-Wave)
L'allarme manomissione è acceso
ID Lock 150 / 202 (Z-Wave)
L'allarme di calore è acceso
ID Lock 150 / 202 (Z-Wave)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Z-Wave)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 150 / 202 (Z-Wave)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 150 / 202 (Z-Wave)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
ID Lock 150 / 202 (Zigbee)
Una serratura è chiusa
ID Lock 150 / 202 (Zigbee)
L'allarme di contatto è acceso
ID Lock 150 / 202 (Zigbee)
L'allarme della batteria è acceso
ID Lock 150 / 202 (Zigbee)
L'allarme manomissione è acceso
ID Lock 150 / 202 (Zigbee)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Zigbee)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 150 / 202 (Zigbee)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 150 / 202 (Zigbee)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
Poi...
ID Lock 101 (Z-Wave)
Chiudi
ID Lock 101 (Z-Wave)
Apri
ID Lock 101 (Z-Wave)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 101 (Z-Wave)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 101 (Z-Wave)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 101 (Z-Wave)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 101 (Z-Wave)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
ID Lock 150 / 202 (Z-Wave)
Chiudi
ID Lock 150 / 202 (Z-Wave)
Apri
ID Lock 150 / 202 (Z-Wave)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 150 / 202 (Z-Wave)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 150 / 202 (Z-Wave)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 150 / 202 (Z-Wave)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 150 / 202 (Z-Wave)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
ID Lock 150 / 202 (Zigbee)
Chiudi
ID Lock 150 / 202 (Zigbee)
Apri
ID Lock 150 / 202 (Zigbee)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 150 / 202 (Zigbee)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 150 / 202 (Zigbee)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 150 / 202 (Zigbee)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 150 / 202 (Zigbee)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
Supporto
Hai un problema con questa app? Contatta lo sviluppatore tramite Forum della community di Homey.
Novità
Versione 2.6.4 — Fix: after deleting a user, the code check no longer claims an unknown code is still stored in that slot — confirmed code writes and deletes now update the last scan result immediately.
ID Lock Next
ID Lock Next non è compatibile con l’Homey selezionato.
ID Lock Nextverrà installato a breve su Homey.
Changelog
Inviaremos un ringraziamento a Christer Larsen!
Faremo sapere a Christer Larsen che ami l’applicazione. Forse potresti considerare di supportare Christer Larsen facendo una donazione?
Dona a Christer Larsen
Lo sviluppatore di ID Lock Next accetta donazioni.
Fai una donazione per ringraziarlo!
Il tuo suggerimento è stato inviato
Avviseremo Christer Larsen che hai inviato un suggerimento.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
