ID Lock 101 (Z-Wave)
Cerrado
ID Lock Next
Modern control for ID Lock smart locks over Z-Wave and Zigbee.
¡Advertencia! Es posible que esta aplicación no funcione correctamente.
Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.
ID Lock Next brings modern, reliable control of your ID Lock smart door lock to Homey Pro. It is a ground-up, independent app that speaks both Z-Wave and Zigbee through a single, protocol-agnostic core — so the same features and the same settings work no matter which module your lock uses.
Lock and unlock from Homey, see who opened the door and how, manage the PIN codes for your household, get notified about important events, and tie it all together with flows.
Supported locks:
• ID Lock 150 — Z-Wave or Zigbee
• ID Lock 202 — Z-Wave or Zigbee (shares the 150's swappable module)
• ID Lock 101 — Z-Wave
Features:
• Lock and unlock, with door open/closed and battery status
• Tamper and heat alarms
• "Who unlocked, and how" — PIN, RFID, manual or automatic — as capabilities and flow tokens
• User and PIN management: add, change and clear codes, change the master PIN (Z-Wave), and import/export your user list
• Reliable, queue-based PIN synchronization that respects battery-powered locks, with per-user synced / pending / failed status
• Notifications for lock events and an in-app activity log
• A diagnostics dashboard with a health overview and a downloadable report
• A modern, accessible settings interface — Overview, Users, Sync, Notifications and Diagnostics
• Flow triggers for locked, unlocked and jammed events, carrying who and how
• Flow actions and conditions: set home/away and auto-lock mode, manage the service PIN (Z-Wave), refresh from the lock, and check who last locked or unlocked
• Away mode with a device toggle, a status tile and Flow triggers — kept in sync with the keypad (code + *)
• Lock settings in the device's Advanced Settings: auto-lock, relock, sound volume, hinge direction and more
• Official ID Lock firmware updates for the Z-Wave module, installed through Homey
• Fully available in English, Norwegian and Swedish
This is a TEST release. The full feature set is implemented; the Z-Wave and Zigbee modules for the 150 are developed against real hardware, while the 101 and 202 reuse the same command classes and are awaiting a hardware smoke-test — so expect rough edges and please report anything you run into. Still on the roadmap: making codes added at the lock's keypad visible in the user list.
This is an independent, community project. It is not affiliated with, endorsed by, or supported by ID Lock AS, and "ID Lock" is a trademark of its respective owner. A door lock is a security device — test changes carefully and use at your own risk.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
ID Lock 101 (Z-Wave)
Abierto
ID Lock 101 (Z-Wave)
La alarma de contacto se ha activado
ID Lock 101 (Z-Wave)
La alarma de contacto se ha desactivado
ID Lock 101 (Z-Wave)
El nivel de la batería ha cambiado
ID Lock 101 (Z-Wave)
La alarma de la batería se ha activado
ID Lock 101 (Z-Wave)
La alarma de la batería se ha desactivado
ID Lock 101 (Z-Wave)
La alarma de manipulación se ha activado
ID Lock 101 (Z-Wave)
La alarma de manipulación se ha desactivado
ID Lock 101 (Z-Wave)
La alarma de calor se ha activado
ID Lock 101 (Z-Wave)
La alarma de calor se ha desactivado
ID Lock 101 (Z-Wave)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 101 (Z-Wave)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 101 (Z-Wave)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 101 (Z-Wave)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 101 (Z-Wave)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 101 (Z-Wave)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
ID Lock 101 (Z-Wave)
The service PIN expired
Fires when the temporary service PIN stops being valid — its uses ran out or its time window ended.
ID Lock 101 (Z-Wave)
Too many wrong codes were entered
Fires when the lock temporarily disables its keypad after repeated wrong PIN attempts — a possible break-in attempt. Z-Wave only.
ID Lock 150 / 202 (Z-Wave)
Cerrado
ID Lock 150 / 202 (Z-Wave)
Abierto
ID Lock 150 / 202 (Z-Wave)
La alarma de contacto se ha activado
ID Lock 150 / 202 (Z-Wave)
La alarma de contacto se ha desactivado
ID Lock 150 / 202 (Z-Wave)
El nivel de la batería ha cambiado
ID Lock 150 / 202 (Z-Wave)
La alarma de la batería se ha activado
ID Lock 150 / 202 (Z-Wave)
La alarma de la batería se ha desactivado
ID Lock 150 / 202 (Z-Wave)
La alarma de manipulación se ha activado
ID Lock 150 / 202 (Z-Wave)
La alarma de manipulación se ha desactivado
ID Lock 150 / 202 (Z-Wave)
La alarma de calor se ha activado
ID Lock 150 / 202 (Z-Wave)
La alarma de calor se ha desactivado
ID Lock 150 / 202 (Z-Wave)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Z-Wave)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 150 / 202 (Z-Wave)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 150 / 202 (Z-Wave)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 150 / 202 (Z-Wave)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 150 / 202 (Z-Wave)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
ID Lock 150 / 202 (Z-Wave)
The service PIN expired
Fires when the temporary service PIN stops being valid — its uses ran out or its time window ended.
ID Lock 150 / 202 (Z-Wave)
Too many wrong codes were entered
Fires when the lock temporarily disables its keypad after repeated wrong PIN attempts — a possible break-in attempt. Z-Wave only.
ID Lock 150 / 202 (Zigbee)
Cerrado
ID Lock 150 / 202 (Zigbee)
Abierto
ID Lock 150 / 202 (Zigbee)
La alarma de contacto se ha activado
ID Lock 150 / 202 (Zigbee)
La alarma de contacto se ha desactivado
ID Lock 150 / 202 (Zigbee)
El nivel de la batería ha cambiado
ID Lock 150 / 202 (Zigbee)
La alarma de la batería se ha activado
ID Lock 150 / 202 (Zigbee)
La alarma de la batería se ha desactivado
ID Lock 150 / 202 (Zigbee)
La alarma de manipulación se ha activado
ID Lock 150 / 202 (Zigbee)
La alarma de manipulación se ha desactivado
ID Lock 150 / 202 (Zigbee)
Away mode was turned State
Fires when away mode turns on or off — from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Zigbee)
A PIN code failed to sync
Fires when a user's PIN code could not be written to the lock — for example when the lock rejects it as a duplicate of a code already stored (such as one programmed at the keypad), or when the lock does not respond. The reason tag says why.
ID Lock 150 / 202 (Zigbee)
The door was forced open
Fires when the lock reports the door was opened without unlocking (forced open). Zigbee locks only.
ID Lock 150 / 202 (Zigbee)
The door has been left open
Fires when the door stays open longer than the 'Door-open alert' time set in the device's advanced settings.
ID Lock 150 / 202 (Zigbee)
The lock jammed
Fires when the lock motor reports that it could not lock or unlock.
ID Lock 150 / 202 (Zigbee)
User Action the door with Type
Fires when the door is locked or unlocked by the user you pick — handy for knowing exactly who locked up or came home.
ID Lock 150 / 202 (Zigbee)
The door was State
Fires when the door is locked or unlocked. Choose which state to react to, or either.
Y...
ID Lock 101 (Z-Wave)
Una cerradura está cerrada
ID Lock 101 (Z-Wave)
La alarma de contacto está activada
ID Lock 101 (Z-Wave)
La alarma de la batería está activada
ID Lock 101 (Z-Wave)
La alarma de manipulación está activada
ID Lock 101 (Z-Wave)
La alarma de calor está activada
ID Lock 101 (Z-Wave)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 101 (Z-Wave)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 101 (Z-Wave)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 101 (Z-Wave)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
ID Lock 150 / 202 (Z-Wave)
Una cerradura está cerrada
ID Lock 150 / 202 (Z-Wave)
La alarma de contacto está activada
ID Lock 150 / 202 (Z-Wave)
La alarma de la batería está activada
ID Lock 150 / 202 (Z-Wave)
La alarma de manipulación está activada
ID Lock 150 / 202 (Z-Wave)
La alarma de calor está activada
ID Lock 150 / 202 (Z-Wave)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Z-Wave)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 150 / 202 (Z-Wave)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 150 / 202 (Z-Wave)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
ID Lock 150 / 202 (Zigbee)
Una cerradura está cerrada
ID Lock 150 / 202 (Zigbee)
La alarma de contacto está activada
ID Lock 150 / 202 (Zigbee)
La alarma de la batería está activada
ID Lock 150 / 202 (Zigbee)
La alarma de manipulación está activada
ID Lock 150 / 202 (Zigbee)
Away mode is on
True while the lock is in away mode. Stays in sync when the mode is changed from the keypad (code + *), the app, a Flow or the settings page.
ID Lock 150 / 202 (Zigbee)
Battery is below 20%
True while the lock's battery is below the percentage you set.
ID Lock 150 / 202 (Zigbee)
User was the last to Action the door with Type
True if the door's most recent lock or unlock was done by this user — optionally with a specific method.
ID Lock 150 / 202 (Zigbee)
has a PIN code for Name
True if a user with this name currently has a PIN code on the lock.
Entonces...
ID Lock 101 (Z-Wave)
Cerrar
ID Lock 101 (Z-Wave)
Abrir
ID Lock 101 (Z-Wave)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 101 (Z-Wave)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 101 (Z-Wave)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 101 (Z-Wave)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 101 (Z-Wave)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
ID Lock 150 / 202 (Z-Wave)
Cerrar
ID Lock 150 / 202 (Z-Wave)
Abrir
ID Lock 150 / 202 (Z-Wave)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 150 / 202 (Z-Wave)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 150 / 202 (Z-Wave)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 150 / 202 (Z-Wave)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 150 / 202 (Z-Wave)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
ID Lock 150 / 202 (Zigbee)
Cerrar
ID Lock 150 / 202 (Zigbee)
Abrir
ID Lock 150 / 202 (Zigbee)
Refresh state from the lock
Asks the lock for its current lock/door state (and battery). Useful if Homey looks out of sync.
ID Lock 150 / 202 (Zigbee)
Turn auto-lock On/off
Whether the lock locks itself automatically. The away-mode setting is left unchanged.
ID Lock 150 / 202 (Zigbee)
Set the lock to Mode
Switch the lock between Home and Away mode. The auto-lock setting is left unchanged.
ID Lock 150 / 202 (Zigbee)
Set the service PIN to New service PIN, Validity
The service PIN must be 4-10 digits. Anyone who can edit this Flow can see the code — and anyone with the code can open the door while it is valid. The lock erases the service PIN when its batteries are removed.
ID Lock 150 / 202 (Zigbee)
Set the service PIN validity to Validity
Changes how long or how many times the current service PIN stays valid — the code itself is unchanged. Options with a random PIN or always valid require lock firmware 1.6 or newer.
Asistencia
¿Tienes algún problema con esta aplicación? Contacta con el desarrollador mediante Foro de la comunidad Homey.
Novedades
Versión 2.6.4 — Fix: after deleting a user, the code check no longer claims an unknown code is still stored in that slot — confirmed code writes and deletes now update the last scan result immediately.
ID Lock Next
ID Lock Next no es compatible con el Homey seleccionado.
ID Lock Next se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Christer Larsen!
Le haremos saber a Christer Larsen que te encanta la aplicación. Quizás consideres apoyar a Christer Larsen haciendo una donación.
Donar a Christer Larsen
El desarrollador de ID Lock Next acepta donaciones.
¡Haz una donación para dar las gracias!
Se han enviado tus sugerencias
Avisaremos a Christer Larsen para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
