Rejoignez notre célébration d'anniversaire. Cette semaine seulement, chaque 10e Homey Pro ou Homey Bridge est gratuit !
Blue Power

Lire plus ›

Appareils pris en charge

Cartes Flow

Cliquez sur un appareil ci-dessus pour afficher uniquement les cartes Flow associées.

Quand...

Tank sensor
Status changed to [[status]]
Tank sensor
Tank level changed to [[level]]
Temperature sensor
La température a changé
Temperature sensor
L'humidité a changé
Temperature sensor
La pression a changé
Temperature sensor
Le voltage a changé
Temperature sensor
Status changed to [[status]]
Victron GX
Le niveau de la batterie a changé
Victron GX
L'énergie a changé
Victron GX
Le compteur électrique a changé
Victron GX
Alarm status changed to [[status]] with [[alarms]] and [[warnings]]
Victron GX
Battery status changed to [[status]]
Victron GX
Battery voltage changed to [[voltage]]
Victron GX
Grid surplus changed to [[power]] / [[single_phase]] / [[three_phase]]
Victron GX
Input source changed to [[source]]
Victron GX
Switch position changed
Victron GX
VE Bus status changed to [[status]]

Et...

Victron GX
AC inputs are below Power (W)
Victron GX
AC loads are below Power (W)
Victron GX
AC outputs are below Power (W)
Victron GX
Battery power is below Power (W)
Victron GX
Battery status is Status
Victron GX
Max charge current is Condition Current (A)
Victron GX
Consumption power is below Power (W)
Victron GX
Excess solar power is below Power (W)
Victron GX
Max grid feed-in power is Condition Power (W)
Victron GX
Grid power is below Power (W)
Victron GX
Grid setpoint is Condition Power (W)
Victron GX
Input source is Source
Victron GX
Max discharge power is Condition Power (W)
Victron GX
Min SoC is Condition SoC (%)
Victron GX
Scheduled charging is enabled for schedule Schedule
Victron GX
Solar power is below Power (W)
Victron GX
Switch position is Mode
Victron GX
Time since last full charge is less than Time (seconds)
Victron GX
VE Bus status is Status

Alors...

Victron GX
Create charging schedule Schedule for Day at Start time with duration Duration or SoC SoC
i
Creates a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Disable charging schedule Schedule
i
Disables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Enable charging schedule Schedule
i
Enables a charging schedule. Please note you need to enter your GX device's root password in the device settings.
Victron GX
Limit charge current to Current (A)
i
Sets the maximum charge current (defined under the DVCC section).
Victron GX
Limit grid feed-in power to Power (W)
Victron GX
Limit discharge power to Power (W)
i
Sets the maximum inverter power (defined under ESS).
Victron GX
Set batteryLife state to Mode
Victron GX
Set multiphase regulation state to Mode
Victron GX
Switch relay 1 to State
Victron GX
Switch relay 2 to State
Victron GX
Set switch position to Mode
Victron GX
Update grid setpoint to Power (W)
i
Sets the grid setpoint (defined under ESS).
Victron GX
Update minimum SoC to SoC (%)
i
Sets the minimum SoC, unless grid fails (defined under ESS).

Assistance

Vous avez un problème avec cette appli ? Contacter le développeur ici.

Nouveautés

Version 1.2.8 — New devices for temperature and tank sensors

Afficher le journal des modifications

Victron Energy

Victron Energy n'est pas compatible avec le Homey sélectionné.

Victron Energy va s'installer sur Homey dans un instant.
Installer