ATS Area
El estado ha cambiado ...
Aritech ATS
Extending professional security into intelligent home automation.
¡Advertencia! Es posible que esta aplicación no funcione correctamente.
Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.
Bring your Aritech ATS Advisor Advanced alarm panel into Homey and keep your home's security at your fingertips. Arm and disarm areas, follow area and zone status in real time over your local network, and give the detectors that have guarded your home for years a second role: a decades-old PIR detector becomes a motion sensor you can build Flows on, so your security system works together with the rest of your smart home.
This is an unofficial, community-developed app and is not affiliated with, endorsed by, or supported by Aritech or KGS (Kidde Global Services). It requires an Aritech ATS Advisor Advanced panel with a network connection and the automation/IP protocol enabled, along with the panel encryption key and a login.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
ATS Area
La alarma general se ha activado
ATS Area
La alarma general se ha desactivado
ATS Area
La alarma de incendios se ha activado
ATS Area
La alarma de incendios se ha desactivado
ATS Area
La alarma de manipulación se ha activado
ATS Area
La alarma de manipulación se ha desactivado
ATS Area
The panic alarm turned on
Triggers when a panic (hold-up) alarm is reported for this area.
ATS Area
The panic alarm turned off
Triggers when the panic alarm for this area clears.
ATS Area
The medical alarm turned on
Triggers when a medical alarm is reported for this area.
ATS Area
The medical alarm turned off
Triggers when the medical alarm for this area clears.
ATS Area
The duress alarm turned on
Triggers when a duress alarm is reported for this area.
ATS Area
The duress alarm turned off
Triggers when the duress alarm for this area clears.
ATS Area
A zone opened
Triggers when a zone in this area becomes active (open).
ATS Area
A zone closed
Triggers when a zone in this area becomes inactive (closed).
ATS Area
A zone triggers an alarm
Triggers when a zone in this area goes into alarm.
ATS Area
A zone is tampered
Triggers when a zone in this area reports tamper.
ATS Area
A zone was bypassed
Triggers when a zone in this area is inhibited, so the panel ignores it while armed.
ATS Area
A zone was restored
Triggers when a zone in this area is no longer inhibited and is monitored again.
ATS Area
The exit delay started
Triggers when the panel starts counting down the exit delay, so you have the whole countdown to switch things off or close up.
ATS Area
The entry delay started
Triggers when the panel starts counting down the entry delay. Someone came in through an entry route and the alarm has not sounded yet, which makes this the earliest warning the panel can give.
ATS Area
The exit delay ended
Triggers when the exit countdown stops. The armed tag is yes when the countdown completed and the area is set, and no when it was cancelled.
ATS Area
The entry delay ended
Triggers when the entry countdown stops. The armed tag is no when someone disarmed in time, and yes when the delay expired while the area stayed set. The alarm tag says whether the panel was already sounding at that moment.
ATS Zone
La alarma de movimiento se ha activado
ATS Zone
La alarma de movimiento se ha desactivado
ATS Zone
La alarma general se ha activado
ATS Zone
La alarma general se ha desactivado
ATS Zone
La alarma de manipulación se ha activado
ATS Zone
La alarma de manipulación se ha desactivado
ATS Zone
The zone was bypassed
Triggers when this zone is inhibited on the panel, so it is ignored while armed.
ATS Zone
The zone was restored
Triggers when this zone is no longer inhibited and is monitored again.
Y...
ATS Area
El estado es ...
ATS Area
La alarma general está activada
ATS Area
La alarma de incendios está activada
ATS Area
La alarma de manipulación está activada
ATS Area
The area is ready to arm
Checks whether the panel reports this area as ready to arm, meaning no active zones or faults are blocking it.
ATS Area
The area has open zones
Checks whether one or more zones in this area are currently active (open).
ATS Area
The area has zone faults
Checks whether one or more zones in this area report a fault.
ATS Area
The area has bypassed zones
Checks whether one or more zones in this area are bypassed. Bypassed zones do not block arming, so the area can be armed with gaps in its coverage.
ATS Area
The area is in an entry or exit delay
Checks whether the panel is counting down an entry or exit delay. During those seconds the area already reports as armed, so add this condition to keep a Flow from treating your own coming and going as an intrusion.
ATS Area
Zone Zone is open
ATS Area
Zone Zone is bypassed
ATS Zone
La alarma de movimiento está activada
ATS Zone
La alarma general está activada
ATS Zone
La alarma de manipulación está activada
ATS Zone
The zone is bypassed
Checks whether this zone is currently inhibited on the panel.
Entonces...
ATS Area
Definir estado ...
ATS Area
Arm night mode
Arm this area in the night / part set 2 mode.
ATS Area
Force arm Mode
Arm this area, forcing past faults, active or inhibited zones.
ATS Area
Inhibit zone Zone
Bypass (inhibit) a zone so it is ignored while armed.
ATS Area
Uninhibit zone Zone
Restore (un-inhibit) a previously bypassed zone.
ATS Zone
Bypass this zone
Inhibit this zone so the panel ignores it while armed.
ATS Zone
Restore this zone
Remove the inhibit from this zone so it is monitored again.
Asistencia
¿Tienes algún problema con esta aplicación? Contacta con el desarrollador aquí.
Novedades
Versión 0.13.0 — New: - Flow cards for the entry and exit delay, so a Flow can act while the panel is counting down - tags on a finished countdown: whether the area ended up armed, and whether the alarm was sounding - a condition to check whether an area is counting down - a condition to check whether an area has bypassed zones
Aritech ATS
Aritech ATS no es compatible con el Homey seleccionado.
Aritech ATS se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Ignaece Bliekendaal!
Le haremos saber a Ignaece Bliekendaal que te encanta la aplicación.
Se han enviado tus sugerencias
Avisaremos a Ignaece Bliekendaal para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
