ATS Area
홈 알람 상태가 변경되면 ...
Aritech ATS
Extending professional security into intelligent home automation.
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
Bring your Aritech ATS Advisor Advanced alarm panel into Homey and keep your home's security at your fingertips. Arm and disarm areas, follow area and zone status in real time over your local network, and give the detectors that have guarded your home for years a second role: a decades-old PIR detector becomes a motion sensor you can build Flows on, so your security system works together with the rest of your smart home.
This is an unofficial, community-developed app and is not affiliated with, endorsed by, or supported by Aritech or KGS (Kidde Global Services). It requires an Aritech ATS Advisor Advanced panel with a network connection and the automation/IP protocol enabled, along with the panel encryption key and a login.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
ATS Area
알람이 켜지면
ATS Area
알람이 꺼지면
ATS Area
화재가 감지되면
ATS Area
화재 감지가 정상 상태이면
ATS Area
변화가 감지되면
ATS Area
변화 감지가 정상 상태이면
ATS Area
The panic alarm turned on
Triggers when a panic (hold-up) alarm is reported for this area.
ATS Area
The panic alarm turned off
Triggers when the panic alarm for this area clears.
ATS Area
The medical alarm turned on
Triggers when a medical alarm is reported for this area.
ATS Area
The medical alarm turned off
Triggers when the medical alarm for this area clears.
ATS Area
The duress alarm turned on
Triggers when a duress alarm is reported for this area.
ATS Area
The duress alarm turned off
Triggers when the duress alarm for this area clears.
ATS Area
A zone opened
Triggers when a zone in this area becomes active (open).
ATS Area
A zone closed
Triggers when a zone in this area becomes inactive (closed).
ATS Area
A zone triggers an alarm
Triggers when a zone in this area goes into alarm.
ATS Area
A zone is tampered
Triggers when a zone in this area reports tamper.
ATS Area
A zone was bypassed
Triggers when a zone in this area is inhibited, so the panel ignores it while armed.
ATS Area
A zone was restored
Triggers when a zone in this area is no longer inhibited and is monitored again.
ATS Area
The exit delay started
Triggers when the panel starts counting down the exit delay, so you have the whole countdown to switch things off or close up.
ATS Area
The entry delay started
Triggers when the panel starts counting down the entry delay. Someone came in through an entry route and the alarm has not sounded yet, which makes this the earliest warning the panel can give.
ATS Area
The exit delay ended
Triggers when the exit countdown stops. The armed tag is yes when the countdown completed and the area is set, and no when it was cancelled.
ATS Area
The entry delay ended
Triggers when the entry countdown stops. The armed tag is no when someone disarmed in time, and yes when the delay expired while the area stayed set. The alarm tag says whether the panel was already sounding at that moment.
ATS Zone
움직임이 감지되면
ATS Zone
움직임이 없으면
ATS Zone
알람이 켜지면
ATS Zone
알람이 꺼지면
ATS Zone
변화가 감지되면
ATS Zone
변화 감지가 정상 상태이면
ATS Zone
The zone was bypassed
Triggers when this zone is inhibited on the panel, so it is ignored while armed.
ATS Zone
The zone was restored
Triggers when this zone is no longer inhibited and is monitored again.
그리고...
ATS Area
홈 알람 상태가 다음이면 ...
ATS Area
알람이 켜지면
ATS Area
화재가 감지되면
ATS Area
변화가 감지되면
ATS Area
The area is ready to arm
Checks whether the panel reports this area as ready to arm, meaning no active zones or faults are blocking it.
ATS Area
The area has open zones
Checks whether one or more zones in this area are currently active (open).
ATS Area
The area has zone faults
Checks whether one or more zones in this area report a fault.
ATS Area
The area has bypassed zones
Checks whether one or more zones in this area are bypassed. Bypassed zones do not block arming, so the area can be armed with gaps in its coverage.
ATS Area
The area is in an entry or exit delay
Checks whether the panel is counting down an entry or exit delay. During those seconds the area already reports as armed, so add this condition to keep a Flow from treating your own coming and going as an intrusion.
ATS Area
Zone Zone is open
ATS Area
Zone Zone is bypassed
ATS Zone
움직임이 감지되면
ATS Zone
알람이 켜지면
ATS Zone
변화가 감지되면
ATS Zone
The zone is bypassed
Checks whether this zone is currently inhibited on the panel.
그러면...
ATS Area
홈 알람 상태 설정 ...
ATS Area
Arm night mode
Arm this area in the night / part set 2 mode.
ATS Area
Force arm Mode
Arm this area, forcing past faults, active or inhibited zones.
ATS Area
Inhibit zone Zone
Bypass (inhibit) a zone so it is ignored while armed.
ATS Area
Uninhibit zone Zone
Restore (un-inhibit) a previously bypassed zone.
ATS Zone
Bypass this zone
Inhibit this zone so the panel ignores it while armed.
ATS Zone
Restore this zone
Remove the inhibit from this zone so it is monitored again.
지원
이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..
새로운 기능
버전 0.13.0 — New: - Flow cards for the entry and exit delay, so a Flow can act while the panel is counting down - tags on a finished countdown: whether the area ended up armed, and whether the alarm was sounding - a condition to check whether an area is counting down - a condition to check whether an area has bypassed zones
업데이트 로그
Ignaece Bliekendaal 님에게 고맙다는 인사를 전해드리겠습니다!
Ignaece Bliekendaal 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Ignaece Bliekendaal 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
