DSC Alarm Partition
Den generelle alarmen ble aktivert
Envisalink
Connect DSC and Vista alarm sensors to Homey, privately over your local network.
Advarsel! Denne appen fungerer kanskje ikke som den skal.
Denne appen er under testing, og har aldri blitt anmeldt. Den fungerer kanskje ikke som forventet.
Vær ekstra forsiktig når du installerer denne appen.
Bring your DSC or Honeywell/Ademco Vista alarm sensors into everyday Homey routines through an EyezOn Envisalink. See doors, windows, motion and reported panel status alongside the rest of your home, and build useful Flows over your local network without Home Assistant or a separate bridge. Use reported alarm-status changes to turn cameras on when a partition becomes Armed Stay, or switch lights off when it becomes Armed Away. Existing DSC devices and Flows keep their identities when updating this app.
Choose the matching DSC or Vista partition and zone devices during setup. Monitoring starts with alarm control disabled; after testing, you can enable clearly labelled controls and matching Flow actions. Vista adds Instant (Stay without entry delay) and Maximum (Away without entry delay), and requires a user code for every control command. Vista support is being validated with physical testers: Entry Delay is not explicitly reported by its TPI, and zone restoration can be delayed or uncertain, so stale observations never invent a closed zone. Supports Envisalink 3 and 4-family modules on compatible Homey Pro models running Homey 13 or later. This integration supplements, but never replaces, your panel, keypad, siren, professional monitoring or life-safety equipment.
Støttede enheter
Flow-kort
Klikk på en enhet ovenfor for å kun vise relaterte Flow-kort.
Når …
DSC Alarm Partition
Den generelle alarmen ble deaktivert
DSC Alarm Partition
Brannalarmen ble aktivert
DSC Alarm Partition
Brannalarmen ble deaktivert
DSC Alarm Partition
Batterialarmen ble aktivert
DSC Alarm Partition
Batterialarmen ble deaktivert
DSC Alarm Partition
Sabotasjealarmen ble aktivert
DSC Alarm Partition
Sabotasjealarmenen ble deaktivert
DSC Alarm Partition
Alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
DSC Alarm Zone
Kontaktalarmen ble aktivert
DSC Alarm Zone
Kontaktalarmen ble deaktivert
DSC Alarm Zone
Den generelle alarmen ble aktivert
DSC Alarm Zone
Den generelle alarmen ble deaktivert
DSC Alarm Zone
Sabotasjealarmen ble aktivert
DSC Alarm Zone
Sabotasjealarmenen ble deaktivert
DSC Alarm Zone
Batterialarmen ble aktivert
DSC Alarm Zone
Batterialarmen ble deaktivert
Vista Alarm Partition
Den generelle alarmen ble aktivert
Vista Alarm Partition
Den generelle alarmen ble deaktivert
Vista Alarm Partition
Brannalarmen ble aktivert
Vista Alarm Partition
Brannalarmen ble deaktivert
Vista Alarm Partition
Batterialarmen ble aktivert
Vista Alarm Partition
Batterialarmen ble deaktivert
Vista Alarm Partition
Sabotasjealarmen ble aktivert
Vista Alarm Partition
Sabotasjealarmenen ble deaktivert
Vista Alarm Partition
Vista alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
Vista Alarm Zone
Kontaktalarmen ble aktivert
Vista Alarm Zone
Kontaktalarmen ble deaktivert
Vista Alarm Zone
Den generelle alarmen ble aktivert
Vista Alarm Zone
Den generelle alarmen ble deaktivert
Vista Alarm Zone
Sabotasjealarmen ble aktivert
Vista Alarm Zone
Sabotasjealarmenen ble deaktivert
Vista Alarm Zone
Batterialarmen ble aktivert
Vista Alarm Zone
Batterialarmen ble deaktivert
Og …
DSC Alarm Partition
Den generelle alarmen er på
DSC Alarm Partition
Brannalarmen er på
DSC Alarm Partition
Batterialarmen er på
DSC Alarm Partition
Sabotasjealarmen er på
DSC Alarm Partition
Alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
DSC Alarm Zone
Kontaktalarmen er på
DSC Alarm Zone
Den generelle alarmen er på
DSC Alarm Zone
Sabotasjealarmen er på
DSC Alarm Zone
Batterialarmen er på
Vista Alarm Partition
Den generelle alarmen er på
Vista Alarm Partition
Brannalarmen er på
Vista Alarm Partition
Batterialarmen er på
Vista Alarm Partition
Sabotasjealarmen er på
Vista Alarm Partition
Vista alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
Vista Alarm Zone
Kontaktalarmen er på
Vista Alarm Zone
Den generelle alarmen er på
Vista Alarm Zone
Sabotasjealarmen er på
Vista Alarm Zone
Batterialarmen er på
Så …
DSC Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm with no entry delay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Disarm the system
Alarm control and a DSC user code must be configured in the partition settings.
DSC Alarm Partition
Refresh panel status
Vista Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Arm Instant (Stay, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. This is Instant, not Night-Stay.
Vista Alarm Partition
Arm Maximum (Away, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. Maximum removes entry delay.
Vista Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Disarm the system
Alarm control and a Vista user code must be configured in the partition settings.
Vista Alarm Partition
Refresh panel status
Støtte
Har du et problem med denne appen? Kontakt utvikleren ved å sende en e-post.
Nyheter
Versjon 1.4.1 — Combined DSC and Vista Test build with separate Vista devices, Instant/Maximum controls and status Flows. Corrected the Vista Disarm Flow hint to name the Vista user code. Existing DSC devices and Flows are preserved. Physical Vista acceptance remains required.
Envisalink
Envisalink er ikke kompatibel med den valgte Homey.
Envisalink vil straks installeres på Homey.
Endringslogg
Vi sender en takk til Michael Curry!
Vi lar Michael Curry vite at du elsker appen. Vurder å støtte Michael Curry ved å gi en donasjon?
Doner til Michael Curry
Utvikleren av Envisalink tar imot donasjoner.
Gjør en donasjon for å si takk!
Forslaget ditt er sendt
Vi vil varsle Michael Curry om at du har sendt et forslag.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
