DSC Alarm Partition
알람이 켜지면
Envisalink
Connect DSC and Vista alarm sensors to Homey, privately over your local network.
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
Bring your DSC or Honeywell/Ademco Vista alarm sensors into everyday Homey routines through an EyezOn Envisalink. See doors, windows, motion and reported panel status alongside the rest of your home, and build useful Flows over your local network without Home Assistant or a separate bridge. Use reported alarm-status changes to turn cameras on when a partition becomes Armed Stay, or switch lights off when it becomes Armed Away. Existing DSC devices and Flows keep their identities when updating this app.
Choose the matching DSC or Vista partition and zone devices during setup. Monitoring starts with alarm control disabled; after testing, you can enable clearly labelled controls and matching Flow actions. Vista adds Instant (Stay without entry delay) and Maximum (Away without entry delay), and requires a user code for every control command. Vista support is being validated with physical testers: Entry Delay is not explicitly reported by its TPI, and zone restoration can be delayed or uncertain, so stale observations never invent a closed zone. Supports Envisalink 3 and 4-family modules on compatible Homey Pro models running Homey 13 or later. This integration supplements, but never replaces, your panel, keypad, siren, professional monitoring or life-safety equipment.
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
DSC Alarm Partition
알람이 꺼지면
DSC Alarm Partition
화재가 감지되면
DSC Alarm Partition
화재 감지가 정상 상태이면
DSC Alarm Partition
배터리 알람이 '예'이면
DSC Alarm Partition
배터리 알람이 '아니요'이면
DSC Alarm Partition
변화가 감지되면
DSC Alarm Partition
변화 감지가 정상 상태이면
DSC Alarm Partition
Alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
DSC Alarm Zone
열림 감지 열리면
DSC Alarm Zone
열림 감지 닫히면
DSC Alarm Zone
알람이 켜지면
DSC Alarm Zone
알람이 꺼지면
DSC Alarm Zone
변화가 감지되면
DSC Alarm Zone
변화 감지가 정상 상태이면
DSC Alarm Zone
배터리 알람이 '예'이면
DSC Alarm Zone
배터리 알람이 '아니요'이면
Vista Alarm Partition
알람이 켜지면
Vista Alarm Partition
알람이 꺼지면
Vista Alarm Partition
화재가 감지되면
Vista Alarm Partition
화재 감지가 정상 상태이면
Vista Alarm Partition
배터리 알람이 '예'이면
Vista Alarm Partition
배터리 알람이 '아니요'이면
Vista Alarm Partition
변화가 감지되면
Vista Alarm Partition
변화 감지가 정상 상태이면
Vista Alarm Partition
Vista alarm status changed to New alarm status
Runs on a reported status change for this partition. The first status after startup or reconnection establishes a baseline and does not run this card. Disarmed runs when entering the disarmed group, not on ready/not-ready changes within it.
Vista Alarm Zone
열림 감지 열리면
Vista Alarm Zone
열림 감지 닫히면
Vista Alarm Zone
알람이 켜지면
Vista Alarm Zone
알람이 꺼지면
Vista Alarm Zone
변화가 감지되면
Vista Alarm Zone
변화 감지가 정상 상태이면
Vista Alarm Zone
배터리 알람이 '예'이면
Vista Alarm Zone
배터리 알람이 '아니요'이면
그리고...
DSC Alarm Partition
알람이 켜지면
DSC Alarm Partition
화재가 감지되면
DSC Alarm Partition
배터리 알람이 '예'이면
DSC Alarm Partition
변화가 감지되면
DSC Alarm Partition
Alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
DSC Alarm Zone
열림 감지 열리면
DSC Alarm Zone
알람이 켜지면
DSC Alarm Zone
변화가 감지되면
DSC Alarm Zone
배터리 알람이 '예'이면
Vista Alarm Partition
알람이 켜지면
Vista Alarm Partition
화재가 감지되면
Vista Alarm Partition
배터리 알람이 '예'이면
Vista Alarm Partition
변화가 감지되면
Vista Alarm Partition
Vista alarm status is Alarm status
Checks the last confirmed status for this partition. Stops the Flow while disconnected or waiting for a fresh status report, including when inverted. Disarmed includes both ready and not ready.
Vista Alarm Zone
열림 감지 열리면
Vista Alarm Zone
알람이 켜지면
Vista Alarm Zone
변화가 감지되면
Vista Alarm Zone
배터리 알람이 '예'이면
그러면...
DSC Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm with no entry delay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
DSC Alarm Partition
Disarm the system
Alarm control and a DSC user code must be configured in the partition settings.
DSC Alarm Partition
Refresh panel status
Vista Alarm Partition
Set to arm away
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Arm Instant (Stay, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. This is Instant, not Night-Stay.
Vista Alarm Partition
Arm Maximum (Away, no entry delay) on [[device]]
Requires enabled alarm control and a Vista user code. Acknowledgement is not confirmation of arming; use reported status. Maximum removes entry delay.
Vista Alarm Partition
Set to arm stay
Alarm control must be enabled in the partition settings.
Vista Alarm Partition
Disarm the system
Alarm control and a Vista user code must be configured in the partition settings.
Vista Alarm Partition
Refresh panel status
지원
이 앱에 문제가 있습니까? 개발자 연락 방법 이메일 보내기.
새로운 기능
버전 1.4.1 — Combined DSC and Vista Test build with separate Vista devices, Instant/Maximum controls and status Flows. Corrected the Vista Disarm Flow hint to name the Vista user code. Existing DSC devices and Flows are preserved. Physical Vista acceptance remains required.
업데이트 로그
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
