Generic OpenCCU device
Detection active changed
OpenCCU Local
Connect Homematic IP devices locally through OpenCCU
¡Advertencia! Es posible que esta aplicación no funcione correctamente.
Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.
Bring Homematic IP into your everyday Homey Flows: automate lighting, heating and shutters, react to sensors, and keep an eye on your OpenCCU. OpenCCU Local is an independently developed fork of homey-matic, adapted for a direct local connection between OpenCCU and Homey Pro. It supports compatible Homematic IP wireless devices, selected Wired devices and heating groups. Use OpenCCU programs and system variables in Flows, and view system status and service messages in dashboard widgets. No MQTT, CCU-Jack, RedMatic or Home Assistant is required.
Edit supported devices' weekly heating schedules in the app settings or the device's Repair view. The compact English/German editor lets you adjust time periods and temperatures, copy days or profiles, and review changes before saving. Schedules keep running on the CCU/devices; editing a schedule does not activate its profile.
You need a Homey Pro running Homey software 12.9.0 or newer and an OpenCCU reachable on your local network. Configure the connection in the app settings before adding devices. If no matching device or device family is listed, try "Generic OpenCCU device". Available features depend on the datapoints the app can detect and map; full functionality is not guaranteed. The app is in beta, and some models still need testing with real hardware. Devices from the previous Homematic Homey app must be paired again in this app.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
Generic OpenCCU device
Gas flow changed
Generic OpenCCU device
Heater active changed
Generic OpenCCU device
Lock state changed
Generic OpenCCU device
Valve changed
Generic OpenCCU device
PM1 concentration changed
Generic OpenCCU device
PM10 concentration changed
Generic OpenCCU device
PM2.5 concentration changed
Generic OpenCCU device
Passage counter (0–127) changed
Generic OpenCCU device
Passage direction changed
Generic OpenCCU device
Sound playing changed
Generic OpenCCU device
Signal colour changed
Generic OpenCCU device
Siren arming changed
Generic OpenCCU device
Sound file (0 = internal) changed
Generic OpenCCU device
Sunshine duration changed
Generic OpenCCU device
Boost changed
Generic OpenCCU device
Mode changed
Generic OpenCCU device
Weekprofile changed
Generic OpenCCU device
Heating output active changed
Generic OpenCCU device
Wind direction changed
Generic OpenCCU device
Handle position changed
Generic OpenCCU device
A button was pressed
Generic OpenCCU device
Garage light turned off
Generic OpenCCU device
Garage light turned on
Generic OpenCCU device
Garage door position changed
HM-PB-2-FM
La alarma de la batería se ha activado
HM-PB-2-FM
La alarma de la batería se ha desactivado
HM-PB-2-FM
A button was pressed
HM-SCI-3-FM
La alarma de contacto se ha activado
HM-SCI-3-FM
La alarma de contacto se ha desactivado
HM-SCI-3-FM
La alarma de la batería se ha activado
HM-SCI-3-FM
La alarma de la batería se ha desactivado
HM-Sec-Sir-WM
Encendido
HM-Sec-Sir-WM
Apagado
HM-Sec-Sir-WM
La alarma de manipulación se ha activado
HM-Sec-Sir-WM
La alarma de manipulación se ha desactivado
HM-Sec-Sir-WM
La alarma de la batería se ha activado
HM-Sec-Sir-WM
La alarma de la batería se ha desactivado
HM-Sec-Sir-WM
Siren arming changed
HmIP switch and meter plugs
Encendido
HmIP switch and meter plugs
Apagado
HmIP switch and meter plugs
A button was pressed
HmIP-BBL
La posición ha cambiado
HmIP-BBL
El estado ha cambiado ...
HmIP-BBL
La inclinación ha cambiado
HmIP-BBL
A button was pressed
HmIP-BDT
Encendido
HmIP-BDT
Apagado
HmIP-BDT
La intensidad de la luz ha cambiado
HmIP-BDT
A button was pressed
HmIP-BRA
A button was pressed
HmIP-BRC2
A button was pressed
HmIP-BROLL / BROLL-2
La posición ha cambiado
HmIP-BROLL / BROLL-2
El estado ha cambiado ...
HmIP-BS2
Encendido
HmIP-BS2
Apagado
HmIP-BSL
Encendido
HmIP-BSL
Apagado
HmIP-BSL
Signal colour changed
HmIP-BSL
A button was pressed
HmIP-BSM
Encendido
HmIP-BSM
Apagado
HmIP-BSM
La potencia ha cambiado
HmIP-BSM
La tensión ha cambiado
HmIP-BSM
La corriente eléctrica ha cambiado
HmIP-BSM
El contador de energía ha cambiado
HmIP-BSM
A button was pressed
HmIP-BWTH
La temperatura ha cambiado
HmIP-BWTH
La humedad ha cambiado
HmIP-BWTH
La temperatura deseada ha cambiado
HmIP-BWTH
Boost changed
HmIP-BWTH
Mode changed
HmIP-BWTH
Weekprofile changed
HmIP-DBB
A button was pressed
HmIP-DLD
Cerrado
HmIP-DLD
Abierto
HmIP-DLP
La alarma de contacto se ha activado
HmIP-DLP
La alarma de contacto se ha desactivado
HmIP-DLP
A button was pressed
HmIP-DLS
Lock state changed
HmIP-DRBLI4
A button was pressed
HmIP-DRDI3
Encendido
HmIP-DRDI3
Apagado
HmIP-DRDI3
La intensidad de la luz ha cambiado
HmIP-DRG-DALI
Encendido
HmIP-DRG-DALI
Apagado
HmIP-DRG-DALI
La intensidad de la luz ha cambiado
HmIP-DRSI1
Encendido
HmIP-DRSI1
Apagado
HmIP-DRSI4
Encendido
HmIP-DRSI4
Apagado
HmIP-DSD-PCB
A button was pressed
HmIP-ESI
La potencia ha cambiado
HmIP-ESI
El contador de energía ha cambiado
HmIP-ESI
El contador de gas ha cambiado
HmIP-ESI
Gas flow changed
HmIP-eTRV radiator thermostats
La temperatura ha cambiado
HmIP-eTRV radiator thermostats
La temperatura deseada ha cambiado
HmIP-eTRV radiator thermostats
Valve changed
HmIP-eTRV radiator thermostats
Boost changed
HmIP-eTRV radiator thermostats
Mode changed
HmIP-eTRV radiator thermostats
Weekprofile changed
HmIP-FAL230-C10
Heating output active changed
HmIP-FALMOT-C12
Valve changed
HmIP-FBL
La posición ha cambiado
HmIP-FBL
El estado ha cambiado ...
HmIP-FBL
La inclinación ha cambiado
HmIP-FCI1
La alarma de contacto se ha activado
HmIP-FCI1
La alarma de contacto se ha desactivado
HmIP-FCI1
A button was pressed
HmIP-FCI6
A button was pressed
HmIP-FDT
Encendido
HmIP-FDT
Apagado
HmIP-FDT
La intensidad de la luz ha cambiado
HmIP-FROLL
La posición ha cambiado
HmIP-FROLL
El estado ha cambiado ...
HmIP-FS6
Encendido
HmIP-FS6
Apagado
HmIP-FSI
Encendido
HmIP-FSI
Apagado
HmIP-FSI16
Encendido
HmIP-FSI16
Apagado
HmIP-FSI6
Encendido
HmIP-FSI6
Apagado
HmIP-FSM
Encendido
HmIP-FSM
Apagado
HmIP-FSM
La potencia ha cambiado
HmIP-FSM
La tensión ha cambiado
HmIP-FSM
La corriente eléctrica ha cambiado
HmIP-FSM
El contador de energía ha cambiado
HmIP-FSM16
Encendido
HmIP-FSM16
Apagado
HmIP-FSM16
La potencia ha cambiado
HmIP-FSM16
La tensión ha cambiado
HmIP-FSM16
La corriente eléctrica ha cambiado
HmIP-FSM16
El contador de energía ha cambiado
HmIP-KRC4
A button was pressed
HmIP-KRCA
A button was pressed
HmIP-LSC
Encendido
HmIP-LSC
Apagado
HmIP-MIO16-PCB
A button was pressed
HmIP-MOD-HO
Cerrados
HmIP-MOD-HO
Abiertos
HmIP-MOD-HO
Encendido
HmIP-MOD-HO
Apagado
HmIP-MOD-HO
Garage light turned off
HmIP-MOD-HO
Garage light turned on
HmIP-MOD-HO
Garage door position changed
HmIP-MOD-OC8
Encendido
HmIP-MOD-OC8
Apagado
HmIP-MOD-RC8
A button was pressed
HmIP-MOD-TM
Cerrados
HmIP-MOD-TM
Abiertos
HmIP-MP3P
Sound playing changed
HmIP-MP3P
Signal colour changed
HmIP-MP3P
Sound file (0 = internal) changed
HmIP-PCBS
Encendido
HmIP-PCBS
Apagado
HmIP-PCBS-BAT
Encendido
HmIP-PCBS-BAT
Apagado
HmIP-PCBS2
Encendido
HmIP-PCBS2
Apagado
HmIP-PDT
Encendido
HmIP-PDT
Apagado
HmIP-PDT
La intensidad de la luz ha cambiado
HmIP-RC8
A button was pressed
HmIP-RCB1
A button was pressed
HmIP-RCV-50
A button was pressed
HmIP-RGBW
Encendido
HmIP-RGBW
Apagado
HmIP-RGBW
La intensidad de la luz ha cambiado
HmIP-SAM
La alarma de movimiento se ha activado
HmIP-SAM
La alarma de movimiento se ha desactivado
HmIP-SCI
La alarma de contacto se ha activado
HmIP-SCI
La alarma de contacto se ha desactivado
HmIP-SCTH230
El nivel de CO₂ ha cambiado
HmIP-SCTH230
La temperatura ha cambiado
HmIP-SCTH230
La humedad ha cambiado
HmIP-SCTH230
Encendido
HmIP-SCTH230
Apagado
HmIP-SFD
La temperatura ha cambiado
HmIP-SFD
La humedad ha cambiado
HmIP-SFD
PM1 concentration changed
HmIP-SFD
PM10 concentration changed
HmIP-SFD
PM2.5 concentration changed
HmIP-SLO
La luminancia ha cambiado
HmIP-SMI
La alarma de movimiento se ha activado
HmIP-SMI
La alarma de movimiento se ha desactivado
HmIP-SMI
La luminancia ha cambiado
HmIP-SMI
Detection active changed
HmIP-SMI55
La alarma de movimiento se ha activado
HmIP-SMI55
La alarma de movimiento se ha desactivado
HmIP-SMI55
La luminancia ha cambiado
HmIP-SMI55
Detection active changed
HmIP-SMI55
A button was pressed
HmIP-SMO-A
La alarma de movimiento se ha activado
HmIP-SMO-A
La alarma de movimiento se ha desactivado
HmIP-SMO-A
La luminancia ha cambiado
HmIP-SMO-A
Detection active changed
HmIP-SPDR
Passage counter (0–127) changed
HmIP-SPDR
Passage direction changed
HmIP-SPI
La alarma de movimiento se ha activado
HmIP-SPI
La alarma de movimiento se ha desactivado
HmIP-SPI
La luminancia ha cambiado
HmIP-SPI
Detection active changed
HmIP-SRD
La alarma de agua se ha activado
HmIP-SRD
La alarma de agua se ha desactivado
HmIP-SRD
La temperatura ha cambiado
HmIP-SRD
Heater active changed
HmIP-SRH
Handle position changed
HmIP-STE2-PCB
La temperatura ha cambiado
HmIP-STH
La temperatura ha cambiado
HmIP-STH
La humedad ha cambiado
HmIP-STH
Boost changed
HmIP-STH
Mode changed
HmIP-STH
Weekprofile changed
HmIP-STHD
La temperatura ha cambiado
HmIP-STHD
La humedad ha cambiado
HmIP-STHD
Boost changed
HmIP-STHD
Mode changed
HmIP-STHD
Weekprofile changed
HmIP-STHO
La temperatura ha cambiado
HmIP-STHO
La humedad ha cambiado
HmIP-SWD
La alarma de agua se ha activado
HmIP-SWD
La alarma de agua se ha desactivado
HmIP-SWDM
La alarma de contacto se ha activado
HmIP-SWDM
La alarma de contacto se ha desactivado
HmIP-SWDO window / door contacts
La alarma de contacto se ha activado
HmIP-SWDO window / door contacts
La alarma de contacto se ha desactivado
HmIP-SWO-B
La temperatura ha cambiado
HmIP-SWO-B
La humedad ha cambiado
HmIP-SWO-B
La luminancia ha cambiado
HmIP-SWO-B
La fuerza del viento ha cambiado
HmIP-SWO-B
Sunshine duration changed
HmIP-SWO-PL
La temperatura ha cambiado
HmIP-SWO-PL
La humedad ha cambiado
HmIP-SWO-PL
La luminancia ha cambiado
HmIP-SWO-PL
La fuerza del viento ha cambiado
HmIP-SWO-PL
Sunshine duration changed
HmIP-SWO-PR
La temperatura ha cambiado
HmIP-SWO-PR
La humedad ha cambiado
HmIP-SWO-PR
La luminancia ha cambiado
HmIP-SWO-PR
La fuerza del viento ha cambiado
HmIP-SWO-PR
El ángulo del viento ha cambiado
HmIP-SWO-PR
La lluvia ha cambiado
HmIP-SWO-PR
Sunshine duration changed
HmIP-SWO-PR
Wind direction changed
HmIP-SWSD
La alarma de humo se ha activado
HmIP-SWSD
La alarma de humo se ha desactivado
HmIP-UDI-SMI55
A button was pressed
HmIP-USBSM
Encendido
HmIP-USBSM
Apagado
HmIP-WGC
Encendido
HmIP-WGC
Apagado
HmIP-WGT
Boost changed
HmIP-WGT
A button was pressed
HmIP-WGTC
Boost changed
HmIP-WGTC
A button was pressed
HmIP-WHS2
Encendido
HmIP-WHS2
Apagado
HmIP-WKP
La alarma de manipulación se ha activado
HmIP-WKP
La alarma de manipulación se ha desactivado
HmIP-WKP
A button was pressed
HmIP-WRC2
A button was pressed
HmIP-WRC6
A button was pressed
HmIP-WRC6-230
Signal colour changed
HmIP-WRC6-230
A button was pressed
HmIP-WRCD
A button was pressed
HmIP-WRCR
A button was pressed
HmIP-WSM
Encendido
HmIP-WSM
Apagado
HmIP-WSM
El caudal del agua ha cambiado
HmIP-WSM
El contador de agua ha cambiado
HMIP-WTH
La temperatura ha cambiado
HMIP-WTH
La humedad ha cambiado
HMIP-WTH
La temperatura deseada ha cambiado
HMIP-WTH
Boost changed
HMIP-WTH
Mode changed
HMIP-WTH
Weekprofile changed
HmIPW-DRAP
La temperatura ha cambiado
HmIPW-DRAP
La tensión ha cambiado
HmIPW-DRD3
Encendido
HmIPW-DRD3
Apagado
HmIPW-DRI16
A button was pressed
HmIPW-DRI32
A button was pressed
HmIPW-DRS8
Encendido
HmIPW-DRS8
Apagado
HmIPW-FAL230-C6
Heating output active changed
HmIPW-FIO6
A button was pressed
HmIPW-SCTHD
La temperatura ha cambiado
HmIPW-SCTHD
La humedad ha cambiado
HmIPW-SCTHD
La temperatura deseada ha cambiado
HmIPW-SCTHD
El nivel de CO₂ ha cambiado
HmIPW-SCTHD
Boost changed
HmIPW-SPI
La alarma de movimiento se ha activado
HmIPW-SPI
La alarma de movimiento se ha desactivado
HmIPW-SPI
La luminancia ha cambiado
HmIPW-SPI
Detection active changed
HmIPW-STH Wired climate sensors
La temperatura ha cambiado
HmIPW-STH Wired climate sensors
La humedad ha cambiado
HmIPW-STH Wired climate sensors
La temperatura deseada ha cambiado
HmIPW-STH Wired climate sensors
Boost changed
HmIPW-STHD
La temperatura ha cambiado
HmIPW-STHD
La humedad ha cambiado
HmIPW-STHD
La temperatura deseada ha cambiado
HmIPW-STHD
El nivel de CO₂ ha cambiado
HmIPW-STHD
Boost changed
HmIPW-WRC6
Signal colour changed
HmIPW-WRC6
A button was pressed
HmIPW-WTH
La temperatura ha cambiado
HmIPW-WTH
La humedad ha cambiado
HmIPW-WTH
La temperatura deseada ha cambiado
HmIPW-WTH
El nivel de CO₂ ha cambiado
HmIPW-WTH
Boost changed
OpenCCU groups
La temperatura ha cambiado
OpenCCU groups
La humedad ha cambiado
OpenCCU groups
La temperatura deseada ha cambiado
OpenCCU groups
Boost changed
OpenCCU groups
Mode changed
OpenCCU groups
Weekprofile changed
OpenCCU system
Service message active changed
OpenCCU system
Connection changed
OpenCCU system
Carrier sense changed
OpenCCU system
HmIP devices changed
OpenCCU system
Duty cycle changed
OpenCCU system
Service messages changed
Y...
Generic OpenCCU device
Detection active is Detection active
Generic OpenCCU device
Gas flow is Comparison Gas flow
Generic OpenCCU device
Heater active is Heater active
Generic OpenCCU device
Lock state is Lock state
Generic OpenCCU device
Valve is Comparison Valve
Generic OpenCCU device
PM1 concentration is Comparison PM1 concentration
Generic OpenCCU device
PM10 concentration is Comparison PM10 concentration
Generic OpenCCU device
PM2.5 concentration is Comparison PM2.5 concentration
Generic OpenCCU device
Passage counter (0–127) is Comparison Passage counter (0–127)
Generic OpenCCU device
Passage direction is Passage direction
Generic OpenCCU device
Sound playing is Sound playing
Generic OpenCCU device
Signal colour is Signal colour
Generic OpenCCU device
Siren arming is Siren arming
Generic OpenCCU device
Sound file (0 = internal) is Comparison Sound file (0 = internal)
Generic OpenCCU device
Sunshine duration is Comparison Sunshine duration
Generic OpenCCU device
Boost is Boost
Generic OpenCCU device
Mode is Mode
Generic OpenCCU device
Weekprofile is Weekprofile
Generic OpenCCU device
Heating output active is Heating output active
Generic OpenCCU device
Wind direction is Wind direction
Generic OpenCCU device
Garage door position is Position
Generic OpenCCU device
Garage light is on
Generic OpenCCU device
Handle is closed
Generic OpenCCU device
Handle is open
Generic OpenCCU device
Handle is tilted
HM-PB-2-FM
La alarma de la batería está activada
HM-SCI-3-FM
La alarma de contacto está activada
HM-SCI-3-FM
La alarma de la batería está activada
HM-Sec-Sir-WM
Está encendido
HM-Sec-Sir-WM
La alarma de manipulación está activada
HM-Sec-Sir-WM
La alarma de la batería está activada
HM-Sec-Sir-WM
Siren arming is Siren arming
HmIP switch and meter plugs
Está encendido
HmIP-BBL
El estado es ...
HmIP-BDT
Está encendido
HmIP-BROLL / BROLL-2
El estado es ...
HmIP-BS2
Está encendido
HmIP-BSL
Está encendido
HmIP-BSL
Signal colour is Signal colour
HmIP-BSM
Está encendido
HmIP-BWTH
Boost is Boost
HmIP-BWTH
Mode is Mode
HmIP-BWTH
Weekprofile is Weekprofile
HmIP-DLD
Una cerradura está cerrada
HmIP-DLP
La alarma de contacto está activada
HmIP-DLS
Lock state is Lock state
HmIP-DRDI3
Está encendido
HmIP-DRG-DALI
Está encendido
HmIP-DRSI1
Está encendido
HmIP-DRSI4
Está encendido
HmIP-ESI
Gas flow is Comparison Gas flow
HmIP-eTRV radiator thermostats
Valve is Comparison Valve
HmIP-eTRV radiator thermostats
Boost is Boost
HmIP-eTRV radiator thermostats
Mode is Mode
HmIP-eTRV radiator thermostats
Weekprofile is Weekprofile
HmIP-FAL230-C10
Heating output active is Heating output active
HmIP-FALMOT-C12
Valve is Comparison Valve
HmIP-FBL
El estado es ...
HmIP-FCI1
La alarma de contacto está activada
HmIP-FDT
Está encendido
HmIP-FROLL
El estado es ...
HmIP-FS6
Está encendido
HmIP-FSI
Está encendido
HmIP-FSI16
Está encendido
HmIP-FSI6
Está encendido
HmIP-FSM
Está encendido
HmIP-FSM16
Está encendido
HmIP-LSC
Está encendido
HmIP-MOD-HO
Está cerrado
HmIP-MOD-HO
Está encendido
HmIP-MOD-HO
Garage door position is Position
HmIP-MOD-HO
Garage light is on
HmIP-MOD-OC8
Está encendido
HmIP-MOD-TM
Está cerrado
HmIP-MP3P
Sound playing is Sound playing
HmIP-MP3P
Signal colour is Signal colour
HmIP-MP3P
Sound file (0 = internal) is Comparison Sound file (0 = internal)
HmIP-PCBS
Está encendido
HmIP-PCBS-BAT
Está encendido
HmIP-PCBS2
Está encendido
HmIP-PDT
Está encendido
HmIP-RGBW
Está encendido
HmIP-SAM
La alarma de movimiento está activada
HmIP-SCI
La alarma de contacto está activada
HmIP-SCTH230
Está encendido
HmIP-SFD
PM1 concentration is Comparison PM1 concentration
HmIP-SFD
PM10 concentration is Comparison PM10 concentration
HmIP-SFD
PM2.5 concentration is Comparison PM2.5 concentration
HmIP-SMI
La alarma de movimiento está activada
HmIP-SMI
Detection active is Detection active
HmIP-SMI55
La alarma de movimiento está activada
HmIP-SMI55
Detection active is Detection active
HmIP-SMO-A
La alarma de movimiento está activada
HmIP-SMO-A
Detection active is Detection active
HmIP-SPDR
Passage counter (0–127) is Comparison Passage counter (0–127)
HmIP-SPDR
Passage direction is Passage direction
HmIP-SPI
La alarma de movimiento está activada
HmIP-SPI
Detection active is Detection active
HmIP-SRD
La alarma de agua está activada
HmIP-SRD
Heater active is Heater active
HmIP-SRH
Handle is closed
HmIP-SRH
Handle is open
HmIP-SRH
Handle is tilted
HmIP-STH
Boost is Boost
HmIP-STH
Mode is Mode
HmIP-STH
Weekprofile is Weekprofile
HmIP-STHD
Boost is Boost
HmIP-STHD
Mode is Mode
HmIP-STHD
Weekprofile is Weekprofile
HmIP-SWD
La alarma de agua está activada
HmIP-SWDM
La alarma de contacto está activada
HmIP-SWDO window / door contacts
La alarma de contacto está activada
HmIP-SWO-B
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PL
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PR
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PR
Wind direction is Wind direction
HmIP-SWSD
La alarma de humo está activada
HmIP-USBSM
Está encendido
HmIP-WGC
Está encendido
HmIP-WGT
Boost is Boost
HmIP-WGTC
Boost is Boost
HmIP-WHS2
Está encendido
HmIP-WKP
La alarma de manipulación está activada
HmIP-WRC6-230
Signal colour is Signal colour
HmIP-WSM
Está encendido
HMIP-WTH
Boost is Boost
HMIP-WTH
Mode is Mode
HMIP-WTH
Weekprofile is Weekprofile
HmIPW-DRD3
Está encendido
HmIPW-DRS8
Está encendido
HmIPW-FAL230-C6
Heating output active is Heating output active
HmIPW-SCTHD
Boost is Boost
HmIPW-SPI
La alarma de movimiento está activada
HmIPW-SPI
Detection active is Detection active
HmIPW-STH Wired climate sensors
Boost is Boost
HmIPW-STHD
Boost is Boost
HmIPW-WRC6
Signal colour is Signal colour
HmIPW-WTH
Boost is Boost
OpenCCU groups
Boost is Boost
OpenCCU groups
Mode is Mode
OpenCCU groups
Weekprofile is Weekprofile
OpenCCU Local
OpenCCU variable System variable equals Value
OpenCCU system
Service message active is Service message active
OpenCCU system
Connection is Connection
OpenCCU system
Carrier sense is Comparison Carrier sense
OpenCCU system
HmIP devices is Comparison HmIP devices
OpenCCU system
Duty cycle is Comparison Duty cycle
OpenCCU system
Service messages is Comparison Service messages
Entonces...
Generic OpenCCU device
Move garage door to ventilation position
Generic OpenCCU device
Activate boost
Generic OpenCCU device
Deactivate thermostat boost
Generic OpenCCU device
Set detection to Detection
Generic OpenCCU device
Garage door: Command
Generic OpenCCU device
Set mode to Mode
Generic OpenCCU device
Set week profile to Profile
Generic OpenCCU device
Toggle garage light
Generic OpenCCU device
Turn garage light off
Generic OpenCCU device
Turn garage light on
HM-Sec-Sir-WM
Encender
HM-Sec-Sir-WM
Apagar
HM-Sec-Sir-WM
Encender o apagar
HM-Sec-Sir-WM
Set Alarm to State
HM-Sec-Sir-WM
Set siren arming to Arming
HmIP switch and meter plugs
Encender
HmIP switch and meter plugs
Apagar
HmIP switch and meter plugs
Encender o apagar
HmIP-BBL
Configurar la posición como %
Cambia la posición a abierto (100 %), cerrado (0 %) o un valor intermedio.
HmIP-BBL
Configurar estado ...
HmIP-BBL
Ajustar la inclinación a %
Cambia la inclinación a abierta (100%), cerrada (0%) o un valor intermedio.
HmIP-BDT
Encender
HmIP-BDT
Apagar
HmIP-BDT
Encender o apagar
HmIP-BDT
Ajustar la intensidad de la luz a %
HmIP-BDT
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-BROLL / BROLL-2
Configurar la posición como %
Cambia la posición a abierto (100 %), cerrado (0 %) o un valor intermedio.
HmIP-BROLL / BROLL-2
Configurar estado ...
HmIP-BS2
Encender
HmIP-BS2
Apagar
HmIP-BS2
Encender o apagar
HmIP-BSL
Encender
HmIP-BSL
Apagar
HmIP-BSL
Encender o apagar
HmIP-BSL
Set signal colour to Colour
HmIP-BSM
Encender
HmIP-BSM
Apagar
HmIP-BSM
Encender o apagar
HmIP-BWTH
Ajustar la temperatura °C
HmIP-BWTH
Activate boost
HmIP-BWTH
Deactivate thermostat boost
HmIP-BWTH
Set mode to Mode
HmIP-BWTH
Set week profile to Profile
HmIP-DLD
Cerrar
HmIP-DLD
Abrir
HmIP-DRDI3
Encender
HmIP-DRDI3
Apagar
HmIP-DRDI3
Encender o apagar
HmIP-DRDI3
Ajustar la intensidad de la luz a %
HmIP-DRDI3
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-DRG-DALI
Encender
HmIP-DRG-DALI
Apagar
HmIP-DRG-DALI
Encender o apagar
HmIP-DRG-DALI
Ajustar la intensidad de la luz a %
HmIP-DRG-DALI
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-DRG-DALI
Configurar la tonalidad °
Selecciona un color de la escala cromática [por ej.: rojo (0°/360°), amarillo (60°) o azul (180°)].
HmIP-DRG-DALI
Configurar un color ...
HmIP-DRG-DALI
Configurar un color aleatorio
HmIP-DRG-DALI
Configurar la saturación %
HmIP-DRSI1
Encender
HmIP-DRSI1
Apagar
HmIP-DRSI1
Encender o apagar
HmIP-DRSI4
Encender
HmIP-DRSI4
Apagar
HmIP-DRSI4
Encender o apagar
HmIP-eTRV radiator thermostats
Ajustar la temperatura °C
HmIP-eTRV radiator thermostats
Activate boost
HmIP-eTRV radiator thermostats
Deactivate thermostat boost
HmIP-eTRV radiator thermostats
Set mode to Mode
HmIP-eTRV radiator thermostats
Set week profile to Profile
HmIP-FBL
Configurar la posición como %
Cambia la posición a abierto (100 %), cerrado (0 %) o un valor intermedio.
HmIP-FBL
Configurar estado ...
HmIP-FBL
Ajustar la inclinación a %
Cambia la inclinación a abierta (100%), cerrada (0%) o un valor intermedio.
HmIP-FDT
Encender
HmIP-FDT
Apagar
HmIP-FDT
Encender o apagar
HmIP-FDT
Ajustar la intensidad de la luz a %
HmIP-FDT
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-FROLL
Configurar la posición como %
Cambia la posición a abierto (100 %), cerrado (0 %) o un valor intermedio.
HmIP-FROLL
Configurar estado ...
HmIP-FS6
Encender
HmIP-FS6
Apagar
HmIP-FS6
Encender o apagar
HmIP-FSI
Encender
HmIP-FSI
Apagar
HmIP-FSI
Encender o apagar
HmIP-FSI16
Encender
HmIP-FSI16
Apagar
HmIP-FSI16
Encender o apagar
HmIP-FSI6
Encender
HmIP-FSI6
Apagar
HmIP-FSI6
Encender o apagar
HmIP-FSM
Encender
HmIP-FSM
Apagar
HmIP-FSM
Encender o apagar
HmIP-FSM16
Encender
HmIP-FSM16
Apagar
HmIP-FSM16
Encender o apagar
HmIP-LSC
Encender
HmIP-LSC
Apagar
HmIP-LSC
Encender o apagar
HmIP-MOD-HO
Cerrar
HmIP-MOD-HO
Abrir
HmIP-MOD-HO
Abrir o cerrar
HmIP-MOD-HO
Encender
HmIP-MOD-HO
Apagar
HmIP-MOD-HO
Encender o apagar
HmIP-MOD-HO
Move garage door to ventilation position
HmIP-MOD-HO
Garage door: Command
HmIP-MOD-HO
Toggle garage light
HmIP-MOD-HO
Turn garage light off
HmIP-MOD-HO
Turn garage light on
HmIP-MOD-OC8
Encender
HmIP-MOD-OC8
Apagar
HmIP-MOD-OC8
Encender o apagar
HmIP-MOD-TM
Cerrar
HmIP-MOD-TM
Abrir
HmIP-MOD-TM
Abrir o cerrar
HmIP-MP3P
Play sound file File (0 = internal) for 10 seconds at 50%
HmIP-MP3P
Set signal colour to Colour
HmIP-MP3P
Stop sound playback
HmIP-PCBS
Encender
HmIP-PCBS
Apagar
HmIP-PCBS
Encender o apagar
HmIP-PCBS-BAT
Encender
HmIP-PCBS-BAT
Apagar
HmIP-PCBS-BAT
Encender o apagar
HmIP-PCBS2
Encender
HmIP-PCBS2
Apagar
HmIP-PCBS2
Encender o apagar
HmIP-PDT
Encender
HmIP-PDT
Apagar
HmIP-PDT
Encender o apagar
HmIP-PDT
Ajustar la intensidad de la luz a %
HmIP-PDT
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-RGBW
Encender
HmIP-RGBW
Apagar
HmIP-RGBW
Encender o apagar
HmIP-RGBW
Ajustar la intensidad de la luz a %
HmIP-RGBW
Ajustar la intensidad de la luz como relativa %
Atenúa o ilumina con respecto al nivel de atenuación actual del dispositivo.
HmIP-SCTH230
Encender
HmIP-SCTH230
Apagar
HmIP-SCTH230
Encender o apagar
HmIP-SMI
Set detection to Detection
HmIP-SMI55
Set detection to Detection
HmIP-SMO-A
Set detection to Detection
HmIP-SPI
Set detection to Detection
HmIP-STH
Activate boost
HmIP-STH
Deactivate thermostat boost
HmIP-STH
Set mode to Mode
HmIP-STH
Set week profile to Profile
HmIP-STHD
Activate boost
HmIP-STHD
Deactivate thermostat boost
HmIP-STHD
Set mode to Mode
HmIP-STHD
Set week profile to Profile
HmIP-USBSM
Encender
HmIP-USBSM
Apagar
HmIP-USBSM
Encender o apagar
HmIP-WGC
Encender
HmIP-WGC
Apagar
HmIP-WGC
Encender o apagar
HmIP-WGT
Activate boost
HmIP-WGT
Deactivate thermostat boost
HmIP-WGTC
Activate boost
HmIP-WGTC
Deactivate thermostat boost
HmIP-WHS2
Encender
HmIP-WHS2
Apagar
HmIP-WHS2
Encender o apagar
HmIP-WRC6-230
Set signal colour to Colour
HmIP-WRCD
Write Text (16 ASCII characters) on display line Line
HmIP-WSM
Encender
HmIP-WSM
Apagar
HmIP-WSM
Encender o apagar
HMIP-WTH
Ajustar la temperatura °C
HMIP-WTH
Activate boost
HMIP-WTH
Deactivate thermostat boost
HMIP-WTH
Set mode to Mode
HMIP-WTH
Set week profile to Profile
HmIPW-DRD3
Encender
HmIPW-DRD3
Apagar
HmIPW-DRD3
Encender o apagar
HmIPW-DRS8
Encender
HmIPW-DRS8
Apagar
HmIPW-DRS8
Encender o apagar
HmIPW-SCTHD
Ajustar la temperatura °C
HmIPW-SCTHD
Activate boost
HmIPW-SCTHD
Deactivate thermostat boost
HmIPW-SPI
Set detection to Detection
HmIPW-STH Wired climate sensors
Ajustar la temperatura °C
HmIPW-STH Wired climate sensors
Activate boost
HmIPW-STH Wired climate sensors
Deactivate thermostat boost
HmIPW-STHD
Ajustar la temperatura °C
HmIPW-STHD
Activate boost
HmIPW-STHD
Deactivate thermostat boost
HmIPW-WRC6
Set signal colour to Colour
HmIPW-WTH
Ajustar la temperatura °C
HmIPW-WTH
Activate boost
HmIPW-WTH
Deactivate thermostat boost
OpenCCU groups
Ajustar la temperatura °C
OpenCCU groups
Activate boost
OpenCCU groups
Deactivate thermostat boost
OpenCCU groups
Set mode to Mode
OpenCCU groups
Set week profile to Profile
OpenCCU Local
Execute OpenCCU program Program
OpenCCU Local
Set OpenCCU variable System variable to Value
Widgets
Asistencia
¿Tienes algún problema con esta aplicación? Contacta con el desarrollador aquí.
Novedades
Versión 0.1.12 — Preserve existing device capabilities and Flows when discovery is incomplete; retry discovery automatically and restore mappings without re-pairing. Recover device availability after failed command read-back through callbacks or read-only probes, without repeating motor commands. Ignore stale verification errors after newer commands or shutdown. Clarify the classic siren perimeter-alarm label. Physical confirmation of the reported mixed HmIP/BidCos setup is still requested.
OpenCCU Local
OpenCCU Local no es compatible con el Homey seleccionado.
OpenCCU Local se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Christian Pacyna!
Le haremos saber a Christian Pacyna que te encanta la aplicación. Quizás consideres apoyar a Christian Pacyna haciendo una donación.
Donar a Christian Pacyna
El desarrollador de OpenCCU Local acepta donaciones.
¡Haz una donación para dar las gracias!
Se han enviado tus sugerencias
Avisaremos a Christian Pacyna para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
