Generic OpenCCU device
Detection active changed
OpenCCU Local
Connect Homematic IP devices locally through OpenCCU
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
Bring Homematic IP into your everyday Homey Flows: automate lighting, heating and shutters, react to sensors, and keep an eye on your OpenCCU. OpenCCU Local is an independently developed fork of homey-matic, adapted for a direct local connection between OpenCCU and Homey Pro. It supports compatible Homematic IP wireless devices, selected Wired devices and heating groups. Use OpenCCU programs and system variables in Flows, and view system status and service messages in dashboard widgets. No MQTT, CCU-Jack, RedMatic or Home Assistant is required.
Edit supported devices' weekly heating schedules in the app settings or the device's Repair view. The compact English/German editor lets you adjust time periods and temperatures, copy days or profiles, and review changes before saving. Schedules keep running on the CCU/devices; editing a schedule does not activate its profile.
You need a Homey Pro running Homey software 12.9.0 or newer and an OpenCCU reachable on your local network. Configure the connection in the app settings before adding devices. If no matching device or device family is listed, try "Generic OpenCCU device". Available features depend on the datapoints the app can detect and map; full functionality is not guaranteed. The app is in beta, and some models still need testing with real hardware. Devices from the previous Homematic Homey app must be paired again in this app.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Generic OpenCCU device
Gas flow changed
Generic OpenCCU device
Heater active changed
Generic OpenCCU device
Lock state changed
Generic OpenCCU device
Valve changed
Generic OpenCCU device
PM1 concentration changed
Generic OpenCCU device
PM10 concentration changed
Generic OpenCCU device
PM2.5 concentration changed
Generic OpenCCU device
Passage counter (0–127) changed
Generic OpenCCU device
Passage direction changed
Generic OpenCCU device
Sound playing changed
Generic OpenCCU device
Signal colour changed
Generic OpenCCU device
Siren arming changed
Generic OpenCCU device
Sound file (0 = internal) changed
Generic OpenCCU device
Sunshine duration changed
Generic OpenCCU device
Boost changed
Generic OpenCCU device
Mode changed
Generic OpenCCU device
Weekprofile changed
Generic OpenCCU device
Heating output active changed
Generic OpenCCU device
Wind direction changed
Generic OpenCCU device
Handle position changed
Generic OpenCCU device
A button was pressed
Generic OpenCCU device
Garage light turned off
Generic OpenCCU device
Garage light turned on
Generic OpenCCU device
Garage door position changed
HM-PB-2-FM
The battery alarm turned on
HM-PB-2-FM
The battery alarm turned off
HM-PB-2-FM
A button was pressed
HM-SCI-3-FM
The contact alarm turned on
HM-SCI-3-FM
The contact alarm turned off
HM-SCI-3-FM
The battery alarm turned on
HM-SCI-3-FM
The battery alarm turned off
HM-Sec-Sir-WM
Turned on
HM-Sec-Sir-WM
Turned off
HM-Sec-Sir-WM
The tamper alarm turned on
HM-Sec-Sir-WM
The tamper alarm turned off
HM-Sec-Sir-WM
The battery alarm turned on
HM-Sec-Sir-WM
The battery alarm turned off
HM-Sec-Sir-WM
Siren arming changed
HmIP switch and meter plugs
Turned on
HmIP switch and meter plugs
Turned off
HmIP switch and meter plugs
A button was pressed
HmIP-BBL
The position changed
HmIP-BBL
The state changed ...
HmIP-BBL
The tilt position changed
HmIP-BBL
A button was pressed
HmIP-BDT
Turned on
HmIP-BDT
Turned off
HmIP-BDT
The dim level changed
HmIP-BDT
A button was pressed
HmIP-BRA
A button was pressed
HmIP-BRC2
A button was pressed
HmIP-BROLL / BROLL-2
The position changed
HmIP-BROLL / BROLL-2
The state changed ...
HmIP-BS2
Turned on
HmIP-BS2
Turned off
HmIP-BSL
Turned on
HmIP-BSL
Turned off
HmIP-BSL
Signal colour changed
HmIP-BSL
A button was pressed
HmIP-BSM
Turned on
HmIP-BSM
Turned off
HmIP-BSM
The power changed
HmIP-BSM
The voltage changed
HmIP-BSM
The electric current changed
HmIP-BSM
The power meter changed
HmIP-BSM
A button was pressed
HmIP-BWTH
The temperature changes
HmIP-BWTH
The humidity changed
HmIP-BWTH
The target temperature changed
HmIP-BWTH
Boost changed
HmIP-BWTH
Mode changed
HmIP-BWTH
Weekprofile changed
HmIP-DBB
A button was pressed
HmIP-DLD
Locked
HmIP-DLD
Unlocked
HmIP-DLP
The contact alarm turned on
HmIP-DLP
The contact alarm turned off
HmIP-DLP
A button was pressed
HmIP-DLS
Lock state changed
HmIP-DRBLI4
A button was pressed
HmIP-DRDI3
Turned on
HmIP-DRDI3
Turned off
HmIP-DRDI3
The dim level changed
HmIP-DRG-DALI
Turned on
HmIP-DRG-DALI
Turned off
HmIP-DRG-DALI
The dim level changed
HmIP-DRSI1
Turned on
HmIP-DRSI1
Turned off
HmIP-DRSI4
Turned on
HmIP-DRSI4
Turned off
HmIP-DSD-PCB
A button was pressed
HmIP-ESI
The power changed
HmIP-ESI
The power meter changed
HmIP-ESI
The gas meter changed
HmIP-ESI
Gas flow changed
HmIP-eTRV radiator thermostats
The temperature changes
HmIP-eTRV radiator thermostats
The target temperature changed
HmIP-eTRV radiator thermostats
Valve changed
HmIP-eTRV radiator thermostats
Boost changed
HmIP-eTRV radiator thermostats
Mode changed
HmIP-eTRV radiator thermostats
Weekprofile changed
HmIP-FAL230-C10
Heating output active changed
HmIP-FALMOT-C12
Valve changed
HmIP-FBL
The position changed
HmIP-FBL
The state changed ...
HmIP-FBL
The tilt position changed
HmIP-FCI1
The contact alarm turned on
HmIP-FCI1
The contact alarm turned off
HmIP-FCI1
A button was pressed
HmIP-FCI6
A button was pressed
HmIP-FDT
Turned on
HmIP-FDT
Turned off
HmIP-FDT
The dim level changed
HmIP-FROLL
The position changed
HmIP-FROLL
The state changed ...
HmIP-FS6
Turned on
HmIP-FS6
Turned off
HmIP-FSI
Turned on
HmIP-FSI
Turned off
HmIP-FSI16
Turned on
HmIP-FSI16
Turned off
HmIP-FSI6
Turned on
HmIP-FSI6
Turned off
HmIP-FSM
Turned on
HmIP-FSM
Turned off
HmIP-FSM
The power changed
HmIP-FSM
The voltage changed
HmIP-FSM
The electric current changed
HmIP-FSM
The power meter changed
HmIP-FSM16
Turned on
HmIP-FSM16
Turned off
HmIP-FSM16
The power changed
HmIP-FSM16
The voltage changed
HmIP-FSM16
The electric current changed
HmIP-FSM16
The power meter changed
HmIP-KRC4
A button was pressed
HmIP-KRCA
A button was pressed
HmIP-LSC
Turned on
HmIP-LSC
Turned off
HmIP-MIO16-PCB
A button was pressed
HmIP-MOD-HO
Closed
HmIP-MOD-HO
Opened
HmIP-MOD-HO
Turned on
HmIP-MOD-HO
Turned off
HmIP-MOD-HO
Garage light turned off
HmIP-MOD-HO
Garage light turned on
HmIP-MOD-HO
Garage door position changed
HmIP-MOD-OC8
Turned on
HmIP-MOD-OC8
Turned off
HmIP-MOD-RC8
A button was pressed
HmIP-MOD-TM
Closed
HmIP-MOD-TM
Opened
HmIP-MP3P
Sound playing changed
HmIP-MP3P
Signal colour changed
HmIP-MP3P
Sound file (0 = internal) changed
HmIP-PCBS
Turned on
HmIP-PCBS
Turned off
HmIP-PCBS-BAT
Turned on
HmIP-PCBS-BAT
Turned off
HmIP-PCBS2
Turned on
HmIP-PCBS2
Turned off
HmIP-PDT
Turned on
HmIP-PDT
Turned off
HmIP-PDT
The dim level changed
HmIP-RC8
A button was pressed
HmIP-RCB1
A button was pressed
HmIP-RCV-50
A button was pressed
HmIP-RGBW
Turned on
HmIP-RGBW
Turned off
HmIP-RGBW
The dim level changed
HmIP-SAM
The motion alarm turned on
HmIP-SAM
The motion alarm turned off
HmIP-SCI
The contact alarm turned on
HmIP-SCI
The contact alarm turned off
HmIP-SCTH230
The CO₂-level changed
HmIP-SCTH230
The temperature changes
HmIP-SCTH230
The humidity changed
HmIP-SCTH230
Turned on
HmIP-SCTH230
Turned off
HmIP-SFD
The temperature changes
HmIP-SFD
The humidity changed
HmIP-SFD
PM1 concentration changed
HmIP-SFD
PM10 concentration changed
HmIP-SFD
PM2.5 concentration changed
HmIP-SLO
The luminance changed
HmIP-SMI
The motion alarm turned on
HmIP-SMI
The motion alarm turned off
HmIP-SMI
The luminance changed
HmIP-SMI
Detection active changed
HmIP-SMI55
The motion alarm turned on
HmIP-SMI55
The motion alarm turned off
HmIP-SMI55
The luminance changed
HmIP-SMI55
Detection active changed
HmIP-SMI55
A button was pressed
HmIP-SMO-A
The motion alarm turned on
HmIP-SMO-A
The motion alarm turned off
HmIP-SMO-A
The luminance changed
HmIP-SMO-A
Detection active changed
HmIP-SPDR
Passage counter (0–127) changed
HmIP-SPDR
Passage direction changed
HmIP-SPI
The motion alarm turned on
HmIP-SPI
The motion alarm turned off
HmIP-SPI
The luminance changed
HmIP-SPI
Detection active changed
HmIP-SRD
The water alarm turned on
HmIP-SRD
The water alarm turned off
HmIP-SRD
The temperature changes
HmIP-SRD
Heater active changed
HmIP-SRH
Handle position changed
HmIP-STE2-PCB
The temperature changes
HmIP-STH
The temperature changes
HmIP-STH
The humidity changed
HmIP-STH
Boost changed
HmIP-STH
Mode changed
HmIP-STH
Weekprofile changed
HmIP-STHD
The temperature changes
HmIP-STHD
The humidity changed
HmIP-STHD
Boost changed
HmIP-STHD
Mode changed
HmIP-STHD
Weekprofile changed
HmIP-STHO
The temperature changes
HmIP-STHO
The humidity changed
HmIP-SWD
The water alarm turned on
HmIP-SWD
The water alarm turned off
HmIP-SWDM
The contact alarm turned on
HmIP-SWDM
The contact alarm turned off
HmIP-SWDO window / door contacts
The contact alarm turned on
HmIP-SWDO window / door contacts
The contact alarm turned off
HmIP-SWO-B
The temperature changes
HmIP-SWO-B
The humidity changed
HmIP-SWO-B
The luminance changed
HmIP-SWO-B
The wind strength changed
HmIP-SWO-B
Sunshine duration changed
HmIP-SWO-PL
The temperature changes
HmIP-SWO-PL
The humidity changed
HmIP-SWO-PL
The luminance changed
HmIP-SWO-PL
The wind strength changed
HmIP-SWO-PL
Sunshine duration changed
HmIP-SWO-PR
The temperature changes
HmIP-SWO-PR
The humidity changed
HmIP-SWO-PR
The luminance changed
HmIP-SWO-PR
The wind strength changed
HmIP-SWO-PR
The wind angle changed
HmIP-SWO-PR
The rain changed
HmIP-SWO-PR
Sunshine duration changed
HmIP-SWO-PR
Wind direction changed
HmIP-SWSD
The smoke alarm turned on
HmIP-SWSD
The smoke alarm turned off
HmIP-UDI-SMI55
A button was pressed
HmIP-USBSM
Turned on
HmIP-USBSM
Turned off
HmIP-WGC
Turned on
HmIP-WGC
Turned off
HmIP-WGT
Boost changed
HmIP-WGT
A button was pressed
HmIP-WGTC
Boost changed
HmIP-WGTC
A button was pressed
HmIP-WHS2
Turned on
HmIP-WHS2
Turned off
HmIP-WKP
The tamper alarm turned on
HmIP-WKP
The tamper alarm turned off
HmIP-WKP
A button was pressed
HmIP-WRC2
A button was pressed
HmIP-WRC6
A button was pressed
HmIP-WRC6-230
Signal colour changed
HmIP-WRC6-230
A button was pressed
HmIP-WRCD
A button was pressed
HmIP-WRCR
A button was pressed
HmIP-WSM
Turned on
HmIP-WSM
Turned off
HmIP-WSM
The waterflow changed
HmIP-WSM
The water meter changed
HMIP-WTH
The temperature changes
HMIP-WTH
The humidity changed
HMIP-WTH
The target temperature changed
HMIP-WTH
Boost changed
HMIP-WTH
Mode changed
HMIP-WTH
Weekprofile changed
HmIPW-DRAP
The temperature changes
HmIPW-DRAP
The voltage changed
HmIPW-DRD3
Turned on
HmIPW-DRD3
Turned off
HmIPW-DRI16
A button was pressed
HmIPW-DRI32
A button was pressed
HmIPW-DRS8
Turned on
HmIPW-DRS8
Turned off
HmIPW-FAL230-C6
Heating output active changed
HmIPW-FIO6
A button was pressed
HmIPW-SCTHD
The temperature changes
HmIPW-SCTHD
The humidity changed
HmIPW-SCTHD
The target temperature changed
HmIPW-SCTHD
The CO₂-level changed
HmIPW-SCTHD
Boost changed
HmIPW-SPI
The motion alarm turned on
HmIPW-SPI
The motion alarm turned off
HmIPW-SPI
The luminance changed
HmIPW-SPI
Detection active changed
HmIPW-STH Wired climate sensors
The temperature changes
HmIPW-STH Wired climate sensors
The humidity changed
HmIPW-STH Wired climate sensors
The target temperature changed
HmIPW-STH Wired climate sensors
Boost changed
HmIPW-STHD
The temperature changes
HmIPW-STHD
The humidity changed
HmIPW-STHD
The target temperature changed
HmIPW-STHD
The CO₂-level changed
HmIPW-STHD
Boost changed
HmIPW-WRC6
Signal colour changed
HmIPW-WRC6
A button was pressed
HmIPW-WTH
The temperature changes
HmIPW-WTH
The humidity changed
HmIPW-WTH
The target temperature changed
HmIPW-WTH
The CO₂-level changed
HmIPW-WTH
Boost changed
OpenCCU groups
The temperature changes
OpenCCU groups
The humidity changed
OpenCCU groups
The target temperature changed
OpenCCU groups
Boost changed
OpenCCU groups
Mode changed
OpenCCU groups
Weekprofile changed
OpenCCU system
Service message active changed
OpenCCU system
Connection changed
OpenCCU system
Carrier sense changed
OpenCCU system
HmIP devices changed
OpenCCU system
Duty cycle changed
OpenCCU system
Service messages changed
And...
Generic OpenCCU device
Detection active is Detection active
Generic OpenCCU device
Gas flow is Comparison Gas flow
Generic OpenCCU device
Heater active is Heater active
Generic OpenCCU device
Lock state is Lock state
Generic OpenCCU device
Valve is Comparison Valve
Generic OpenCCU device
PM1 concentration is Comparison PM1 concentration
Generic OpenCCU device
PM10 concentration is Comparison PM10 concentration
Generic OpenCCU device
PM2.5 concentration is Comparison PM2.5 concentration
Generic OpenCCU device
Passage counter (0–127) is Comparison Passage counter (0–127)
Generic OpenCCU device
Passage direction is Passage direction
Generic OpenCCU device
Sound playing is Sound playing
Generic OpenCCU device
Signal colour is Signal colour
Generic OpenCCU device
Siren arming is Siren arming
Generic OpenCCU device
Sound file (0 = internal) is Comparison Sound file (0 = internal)
Generic OpenCCU device
Sunshine duration is Comparison Sunshine duration
Generic OpenCCU device
Boost is Boost
Generic OpenCCU device
Mode is Mode
Generic OpenCCU device
Weekprofile is Weekprofile
Generic OpenCCU device
Heating output active is Heating output active
Generic OpenCCU device
Wind direction is Wind direction
Generic OpenCCU device
Garage door position is Position
Generic OpenCCU device
Garage light is on
Generic OpenCCU device
Handle is closed
Generic OpenCCU device
Handle is open
Generic OpenCCU device
Handle is tilted
HM-PB-2-FM
The battery alarm is on
HM-SCI-3-FM
The contact alarm is on
HM-SCI-3-FM
The battery alarm is on
HM-Sec-Sir-WM
Is turned on
HM-Sec-Sir-WM
The tamper alarm is on
HM-Sec-Sir-WM
The battery alarm is on
HM-Sec-Sir-WM
Siren arming is Siren arming
HmIP switch and meter plugs
Is turned on
HmIP-BBL
The state is ...
HmIP-BDT
Is turned on
HmIP-BROLL / BROLL-2
The state is ...
HmIP-BS2
Is turned on
HmIP-BSL
Is turned on
HmIP-BSL
Signal colour is Signal colour
HmIP-BSM
Is turned on
HmIP-BWTH
Boost is Boost
HmIP-BWTH
Mode is Mode
HmIP-BWTH
Weekprofile is Weekprofile
HmIP-DLD
A lock is locked
HmIP-DLP
The contact alarm is on
HmIP-DLS
Lock state is Lock state
HmIP-DRDI3
Is turned on
HmIP-DRG-DALI
Is turned on
HmIP-DRSI1
Is turned on
HmIP-DRSI4
Is turned on
HmIP-ESI
Gas flow is Comparison Gas flow
HmIP-eTRV radiator thermostats
Valve is Comparison Valve
HmIP-eTRV radiator thermostats
Boost is Boost
HmIP-eTRV radiator thermostats
Mode is Mode
HmIP-eTRV radiator thermostats
Weekprofile is Weekprofile
HmIP-FAL230-C10
Heating output active is Heating output active
HmIP-FALMOT-C12
Valve is Comparison Valve
HmIP-FBL
The state is ...
HmIP-FCI1
The contact alarm is on
HmIP-FDT
Is turned on
HmIP-FROLL
The state is ...
HmIP-FS6
Is turned on
HmIP-FSI
Is turned on
HmIP-FSI16
Is turned on
HmIP-FSI6
Is turned on
HmIP-FSM
Is turned on
HmIP-FSM16
Is turned on
HmIP-LSC
Is turned on
HmIP-MOD-HO
Is closed
HmIP-MOD-HO
Is turned on
HmIP-MOD-HO
Garage door position is Position
HmIP-MOD-HO
Garage light is on
HmIP-MOD-OC8
Is turned on
HmIP-MOD-TM
Is closed
HmIP-MP3P
Sound playing is Sound playing
HmIP-MP3P
Signal colour is Signal colour
HmIP-MP3P
Sound file (0 = internal) is Comparison Sound file (0 = internal)
HmIP-PCBS
Is turned on
HmIP-PCBS-BAT
Is turned on
HmIP-PCBS2
Is turned on
HmIP-PDT
Is turned on
HmIP-RGBW
Is turned on
HmIP-SAM
The motion alarm is on
HmIP-SCI
The contact alarm is on
HmIP-SCTH230
Is turned on
HmIP-SFD
PM1 concentration is Comparison PM1 concentration
HmIP-SFD
PM10 concentration is Comparison PM10 concentration
HmIP-SFD
PM2.5 concentration is Comparison PM2.5 concentration
HmIP-SMI
The motion alarm is on
HmIP-SMI
Detection active is Detection active
HmIP-SMI55
The motion alarm is on
HmIP-SMI55
Detection active is Detection active
HmIP-SMO-A
The motion alarm is on
HmIP-SMO-A
Detection active is Detection active
HmIP-SPDR
Passage counter (0–127) is Comparison Passage counter (0–127)
HmIP-SPDR
Passage direction is Passage direction
HmIP-SPI
The motion alarm is on
HmIP-SPI
Detection active is Detection active
HmIP-SRD
The water alarm is on
HmIP-SRD
Heater active is Heater active
HmIP-SRH
Handle is closed
HmIP-SRH
Handle is open
HmIP-SRH
Handle is tilted
HmIP-STH
Boost is Boost
HmIP-STH
Mode is Mode
HmIP-STH
Weekprofile is Weekprofile
HmIP-STHD
Boost is Boost
HmIP-STHD
Mode is Mode
HmIP-STHD
Weekprofile is Weekprofile
HmIP-SWD
The water alarm is on
HmIP-SWDM
The contact alarm is on
HmIP-SWDO window / door contacts
The contact alarm is on
HmIP-SWO-B
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PL
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PR
Sunshine duration is Comparison Sunshine duration
HmIP-SWO-PR
Wind direction is Wind direction
HmIP-SWSD
The smoke alarm is on
HmIP-USBSM
Is turned on
HmIP-WGC
Is turned on
HmIP-WGT
Boost is Boost
HmIP-WGTC
Boost is Boost
HmIP-WHS2
Is turned on
HmIP-WKP
The tamper alarm is on
HmIP-WRC6-230
Signal colour is Signal colour
HmIP-WSM
Is turned on
HMIP-WTH
Boost is Boost
HMIP-WTH
Mode is Mode
HMIP-WTH
Weekprofile is Weekprofile
HmIPW-DRD3
Is turned on
HmIPW-DRS8
Is turned on
HmIPW-FAL230-C6
Heating output active is Heating output active
HmIPW-SCTHD
Boost is Boost
HmIPW-SPI
The motion alarm is on
HmIPW-SPI
Detection active is Detection active
HmIPW-STH Wired climate sensors
Boost is Boost
HmIPW-STHD
Boost is Boost
HmIPW-WRC6
Signal colour is Signal colour
HmIPW-WTH
Boost is Boost
OpenCCU groups
Boost is Boost
OpenCCU groups
Mode is Mode
OpenCCU groups
Weekprofile is Weekprofile
OpenCCU Local
OpenCCU variable System variable equals Value
OpenCCU system
Service message active is Service message active
OpenCCU system
Connection is Connection
OpenCCU system
Carrier sense is Comparison Carrier sense
OpenCCU system
HmIP devices is Comparison HmIP devices
OpenCCU system
Duty cycle is Comparison Duty cycle
OpenCCU system
Service messages is Comparison Service messages
Then...
Generic OpenCCU device
Move garage door to ventilation position
Generic OpenCCU device
Activate boost
Generic OpenCCU device
Deactivate thermostat boost
Generic OpenCCU device
Set detection to Detection
Generic OpenCCU device
Garage door: Command
Generic OpenCCU device
Set mode to Mode
Generic OpenCCU device
Set week profile to Profile
Generic OpenCCU device
Toggle garage light
Generic OpenCCU device
Turn garage light off
Generic OpenCCU device
Turn garage light on
HM-Sec-Sir-WM
Turn on
HM-Sec-Sir-WM
Turn off
HM-Sec-Sir-WM
Toggle on or off
HM-Sec-Sir-WM
Set Alarm to State
HM-Sec-Sir-WM
Set siren arming to Arming
HmIP switch and meter plugs
Turn on
HmIP switch and meter plugs
Turn off
HmIP switch and meter plugs
Toggle on or off
HmIP-BBL
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
HmIP-BBL
Set state ...
HmIP-BBL
Set the tilt position to %
Change the tilt position to open (100%), closed (0%), or a value in between.
HmIP-BDT
Turn on
HmIP-BDT
Turn off
HmIP-BDT
Toggle on or off
HmIP-BDT
Dim to %
HmIP-BDT
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-BROLL / BROLL-2
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
HmIP-BROLL / BROLL-2
Set state ...
HmIP-BS2
Turn on
HmIP-BS2
Turn off
HmIP-BS2
Toggle on or off
HmIP-BSL
Turn on
HmIP-BSL
Turn off
HmIP-BSL
Toggle on or off
HmIP-BSL
Set signal colour to Colour
HmIP-BSM
Turn on
HmIP-BSM
Turn off
HmIP-BSM
Toggle on or off
HmIP-BWTH
Set the temperature °C
HmIP-BWTH
Activate boost
HmIP-BWTH
Deactivate thermostat boost
HmIP-BWTH
Set mode to Mode
HmIP-BWTH
Set week profile to Profile
HmIP-DLD
Lock
HmIP-DLD
Unlock
HmIP-DRDI3
Turn on
HmIP-DRDI3
Turn off
HmIP-DRDI3
Toggle on or off
HmIP-DRDI3
Dim to %
HmIP-DRDI3
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-DRG-DALI
Turn on
HmIP-DRG-DALI
Turn off
HmIP-DRG-DALI
Toggle on or off
HmIP-DRG-DALI
Dim to %
HmIP-DRG-DALI
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-DRG-DALI
Set the hue °
Select a color from the hue scale, for example red (0°/360°), yellow (60°), or blue (180°).
HmIP-DRG-DALI
Set a color ...
HmIP-DRG-DALI
Set a random color
HmIP-DRG-DALI
Set the saturation %
HmIP-DRSI1
Turn on
HmIP-DRSI1
Turn off
HmIP-DRSI1
Toggle on or off
HmIP-DRSI4
Turn on
HmIP-DRSI4
Turn off
HmIP-DRSI4
Toggle on or off
HmIP-eTRV radiator thermostats
Set the temperature °C
HmIP-eTRV radiator thermostats
Activate boost
HmIP-eTRV radiator thermostats
Deactivate thermostat boost
HmIP-eTRV radiator thermostats
Set mode to Mode
HmIP-eTRV radiator thermostats
Set week profile to Profile
HmIP-FBL
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
HmIP-FBL
Set state ...
HmIP-FBL
Set the tilt position to %
Change the tilt position to open (100%), closed (0%), or a value in between.
HmIP-FDT
Turn on
HmIP-FDT
Turn off
HmIP-FDT
Toggle on or off
HmIP-FDT
Dim to %
HmIP-FDT
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-FROLL
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
HmIP-FROLL
Set state ...
HmIP-FS6
Turn on
HmIP-FS6
Turn off
HmIP-FS6
Toggle on or off
HmIP-FSI
Turn on
HmIP-FSI
Turn off
HmIP-FSI
Toggle on or off
HmIP-FSI16
Turn on
HmIP-FSI16
Turn off
HmIP-FSI16
Toggle on or off
HmIP-FSI6
Turn on
HmIP-FSI6
Turn off
HmIP-FSI6
Toggle on or off
HmIP-FSM
Turn on
HmIP-FSM
Turn off
HmIP-FSM
Toggle on or off
HmIP-FSM16
Turn on
HmIP-FSM16
Turn off
HmIP-FSM16
Toggle on or off
HmIP-LSC
Turn on
HmIP-LSC
Turn off
HmIP-LSC
Toggle on or off
HmIP-MOD-HO
Close
HmIP-MOD-HO
Open
HmIP-MOD-HO
Toggle open or closed
HmIP-MOD-HO
Turn on
HmIP-MOD-HO
Turn off
HmIP-MOD-HO
Toggle on or off
HmIP-MOD-HO
Move garage door to ventilation position
HmIP-MOD-HO
Garage door: Command
HmIP-MOD-HO
Toggle garage light
HmIP-MOD-HO
Turn garage light off
HmIP-MOD-HO
Turn garage light on
HmIP-MOD-OC8
Turn on
HmIP-MOD-OC8
Turn off
HmIP-MOD-OC8
Toggle on or off
HmIP-MOD-TM
Close
HmIP-MOD-TM
Open
HmIP-MOD-TM
Toggle open or closed
HmIP-MP3P
Play sound file File (0 = internal) for 10 seconds at 50%
HmIP-MP3P
Set signal colour to Colour
HmIP-MP3P
Stop sound playback
HmIP-PCBS
Turn on
HmIP-PCBS
Turn off
HmIP-PCBS
Toggle on or off
HmIP-PCBS-BAT
Turn on
HmIP-PCBS-BAT
Turn off
HmIP-PCBS-BAT
Toggle on or off
HmIP-PCBS2
Turn on
HmIP-PCBS2
Turn off
HmIP-PCBS2
Toggle on or off
HmIP-PDT
Turn on
HmIP-PDT
Turn off
HmIP-PDT
Toggle on or off
HmIP-PDT
Dim to %
HmIP-PDT
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-RGBW
Turn on
HmIP-RGBW
Turn off
HmIP-RGBW
Toggle on or off
HmIP-RGBW
Dim to %
HmIP-RGBW
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HmIP-SCTH230
Turn on
HmIP-SCTH230
Turn off
HmIP-SCTH230
Toggle on or off
HmIP-SMI
Set detection to Detection
HmIP-SMI55
Set detection to Detection
HmIP-SMO-A
Set detection to Detection
HmIP-SPI
Set detection to Detection
HmIP-STH
Activate boost
HmIP-STH
Deactivate thermostat boost
HmIP-STH
Set mode to Mode
HmIP-STH
Set week profile to Profile
HmIP-STHD
Activate boost
HmIP-STHD
Deactivate thermostat boost
HmIP-STHD
Set mode to Mode
HmIP-STHD
Set week profile to Profile
HmIP-USBSM
Turn on
HmIP-USBSM
Turn off
HmIP-USBSM
Toggle on or off
HmIP-WGC
Turn on
HmIP-WGC
Turn off
HmIP-WGC
Toggle on or off
HmIP-WGT
Activate boost
HmIP-WGT
Deactivate thermostat boost
HmIP-WGTC
Activate boost
HmIP-WGTC
Deactivate thermostat boost
HmIP-WHS2
Turn on
HmIP-WHS2
Turn off
HmIP-WHS2
Toggle on or off
HmIP-WRC6-230
Set signal colour to Colour
HmIP-WRCD
Write Text (16 ASCII characters) on display line Line
HmIP-WSM
Turn on
HmIP-WSM
Turn off
HmIP-WSM
Toggle on or off
HMIP-WTH
Set the temperature °C
HMIP-WTH
Activate boost
HMIP-WTH
Deactivate thermostat boost
HMIP-WTH
Set mode to Mode
HMIP-WTH
Set week profile to Profile
HmIPW-DRD3
Turn on
HmIPW-DRD3
Turn off
HmIPW-DRD3
Toggle on or off
HmIPW-DRS8
Turn on
HmIPW-DRS8
Turn off
HmIPW-DRS8
Toggle on or off
HmIPW-SCTHD
Set the temperature °C
HmIPW-SCTHD
Activate boost
HmIPW-SCTHD
Deactivate thermostat boost
HmIPW-SPI
Set detection to Detection
HmIPW-STH Wired climate sensors
Set the temperature °C
HmIPW-STH Wired climate sensors
Activate boost
HmIPW-STH Wired climate sensors
Deactivate thermostat boost
HmIPW-STHD
Set the temperature °C
HmIPW-STHD
Activate boost
HmIPW-STHD
Deactivate thermostat boost
HmIPW-WRC6
Set signal colour to Colour
HmIPW-WTH
Set the temperature °C
HmIPW-WTH
Activate boost
HmIPW-WTH
Deactivate thermostat boost
OpenCCU groups
Set the temperature °C
OpenCCU groups
Activate boost
OpenCCU groups
Deactivate thermostat boost
OpenCCU groups
Set mode to Mode
OpenCCU groups
Set week profile to Profile
OpenCCU Local
Execute OpenCCU program Program
OpenCCU Local
Set OpenCCU variable System variable to Value
Widgets
Support
Having an issue with this app? Contact the developer via the developer website.
What’s new
Version 0.1.12 — Preserve existing device capabilities and Flows when discovery is incomplete; retry discovery automatically and restore mappings without re-pairing. Recover device availability after failed command read-back through callbacks or read-only probes, without repeating motor commands. Ignore stale verification errors after newer commands or shutdown. Clarify the classic siren perimeter-alarm label. Physical confirmation of the reported mixed HmIP/BidCos setup is still requested.
OpenCCU Local
OpenCCU Local is not compatible with the selected Homey.
OpenCCU Local will install on Homey shortly.
Changelog
We’ll send a thank you to Christian Pacyna!
We’ll let Christian Pacyna know you love the app. Maybe consider supporting Christian Pacyna by making a donation?
Donate to Christian Pacyna
The developer of OpenCCU Local accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Christian Pacyna you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
