LED strip controllers turn a plain LED strip into a smart one. They sit between your power supply and your LED strip, letting you control color, brightness, and color temperature through Homey instead of a physical remote.
Unlike pre-built smart LED strips, controllers work with any standard 5V, 12V or 24V LED strip. This gives you more flexibility on length, brightness, and where you install it, whether that's under kitchen cabinets, behind a TV, or along a ceiling cove.
This Best Buy Guide explores the best LED strip controllers compatible with Homey, helping you build a custom lighting setup that fits your space.
Choosing an LED Strip Controller
LED strip controllers vary in protocol, voltage range, output current, and the type of LED strip they support. The following list highlights the main things to check before buying.
Protocol
Controllers connect over Zigbee, Matter, Wi-Fi, or Z-Wave. Zigbee, Z-Wave and Matter over Thread controllers generally offer faster local response and better reliability with Homey, while Wi-Fi controllers depend on your router and internet connection.
Voltage and Current
Check that the controller's voltage range matches your LED strip and power supply, which is usually 12V or 24V DC. Also check the maximum output current in amps, since this determines how much LED strip length or how many strips you can connect to a single controller.
LED Strip Type
Not all controllers support the same LED strip types. Some only handle RGB or RGBW strips, while others support full RGBCCT strips with separate warm white and cool white channels for tunable white light.
Channels and Wiring
Controllers usually have four or five output channels, matching RGBW or RGBCCT strips. Check the terminal layout and wiring diagram before buying, especially if you plan to reuse an existing power supply or extension cables.
Homey Compatibility
Confirm which Homey hardware the controller needs. Some connect directly to Homey Pro or Homey Pro mini, while others need Homey Bridge for Homey Cloud or Homey Self-Hosted Server.
| Brand | Model | Protocol | Type | Voltage | Total Output | Price |
|---|---|---|---|---|---|---|
 EcoDim | Zigbee LED Controller |  Zigbee | RGBCCT | 12/24V | 20A | €49.95 |
 Gledopto | Pro Max LED Controller | Zigbee | RGBCCT | 5/12/24V | 15A | €29.95 |
| Gledopto | Smart LED Controller |  Matter | RGBCCT | 5/12/24V | 20A | €24.99 |
 MiBoxer | MLZ5 LED Controller |  Thread | RGBCCT | 12/24/48V | 15A | €23.70 |
 Namron | Zigbee LED Controller | Zigbee | RGBCCT | 12/24V | 20A | €49.99 |
 Phoscon | FLS-M LED Controller | Matter | RGBCCT | 5/12/24V | 6A | €60.95 |
 Shelly | Plus RGBW PM |  Wi-Fi | RGBW | 12/24V | 10A | €31.00 |
 Sunricher | Matter LED Controller | Matter | RGBCCT | 12/24/48V | 20A | €31.95 |
 Zemismart | LED Light Strip Driver | Matter | RGBCCT | 12/24V | 25A | €25.99 |
 Zooz | ZEN56 LED Dimmer |  Z-Wave | RGBW | 12/24V | 10A | €29.95 |
EcoDim Zigbee LED Controller
- Compact design
- Zigbee router
- Configurable mode
- Pricey
The EcoDim Zigbee LED Controller is a compact 5-channel controller for RGBCCT LED strips. It runs on Zigbee 3.0 and sits between your LED strip and a non-dimmable power supply, giving you smart control over color, brightness, and white balance.
This controller accepts 12V or 24V DC input and delivers up to 4A per channel, for a total output of 20A. That's enough for most standard RGBCCT strip runs without needing a second controller.
A small onboard mode selector lets you switch the controller between DIM, CCT, RGBW, and RGB+CCT operation. This means the same physical unit can be reconfigured for a simpler strip type later, without buying a different controller.
Homey Pro and Homey Pro mini pair with the EcoDim directly over Zigbee, while Homey Cloud and Homey Self-Hosted Server need Homey Bridge in between. Once paired, you can change color, set brightness, adjust color temperature, and include the controller in Flows and Moods.
Gledopto Pro Max LED Controller
- Wide 5-24V input
- USB-C auxiliary port
- High 10A output per channel
- Bulkier than most
The Gledopto Pro Max is a Zigbee 5-in-1 controller built for RGBCCT LED strips. It accepts a wide 5-24V DC input range, making it flexible enough to pair with several common LED strip voltages using the same controller.
Output current reaches 10A per channel, with a total output of 15A across all five channels. The controller includes a Type-C power port rated at 5V and 3A for auxiliary power, along with a button for mode switching and a wiring diagram printed directly on the housing.
It also includes a power-off memory function, so the controller returns to its last color and brightness setting after a power cut instead of defaulting back to a fixed state.
Once added to Homey, either directly with Homey Pro and Homey Pro mini or through Homey Bridge with Homey Cloud and Homey Self-Hosted Server, you can change color, adjust white balance, dim the strip, and use it in Flows.
Gledopto Matter Smart LED Controller
- Wide 5-24V input
- High total output
- Quick-connect terminals
- Requires stable Wi-Fi
The Gledopto GL-C-208M LED Controller is a Matter version of Gledopto's RGBCCT lineup. It uses Matter over Wi-Fi to connect to your home network, which means it doesn't need a Zigbee coordinator or Gledopto's own app for basic control.
This controller runs on a discrete 5V, 12V, or 24V DC input and delivers up to 15A per channel, with a total output of 20A. Wiring uses solder-free quick-connect terminals, which makes installation faster and easier than screw terminals.
Power can be connected either through a 5.5x2.1mm DC barrel jack or through a separate V+ and V- wire terminal, giving you a choice depending on what your power supply uses. The controller also has a physical on/off push button on the housing, so you can toggle it manually.
Pairing is done through a QR code, standard for Matter devices. Once added to Homey Pro, Homey Pro mini, or Homey Self-Hosted Server, you get color control, brightness, and white balance adjustment, plus the ability to use it in Flows.
MiBoxer MLZ5 LED Controller
- Wide 12-48V input
- Stable connectivity
- Dual control through Matter and RF
- No dynamic lighting modes via Matter
The MiBoxer MLZ5 is a 5-in-1 controller that combines Matter over Thread with MiBoxer's own 2.4GHz RF protocol. This dual setup means you can control it through Homey via Matter, or through a MiBoxer remote using RF, without needing both at once.
The MLZ5 accepts a wide 12-48V DC input range and outputs up to 15A total. Its RF side supports a control distance of 30 meters and can pair with up to 12 remotes, useful if you already own MiBoxer hardware elsewhere in your home.
The MLZ5 also supports automatic relay and sync. If you install several units, one controller can pass its signal to the next, extending RF range through a space, and multiple units can be set to run the same dynamic mode in sync.
As a Thread device, the MLZ5 needs a Thread Border Router to join your Homey network, which Homey Pro and Homey Pro mini both provide. Once paired, you can control color, brightness, and white balance from Homey.
Namron Zigbee LED Controller
- Good build quality
- Switchable mode
- Overtemperature protection
- Pricey
The Namron Zigbee LED Controller is a 5-channel RGBCCT controller built for Zigbee 3.0 networks. It can power strips on 12V or 24V DC, with 4A output available per channel and a maximum load of 480W.
This controller has an indoor Zigbee range of 30 meters. It carries an IP20 rating, so it's suited for dry indoor spaces only. It also includes overtemperature protection and supports Find and Bind pairing, which lets it pair directly to a Zigbee remote without going through a coordinator first.
Namron publishes OTA firmware files for this controller. It can receive firmware updates directly over Zigbee, without needing a manufacturer app, something most brands in this guide don't offer.
Homey Pro and Homey Pro mini connect to the Namron directly over Zigbee, and Homey Bridge brings it to Homey Cloud and Homey Self-Hosted Server. Once paired, you can set color, brightness, and white balance, and build it into Flows or Advanced Flows.
Phoscon FLS-M LED Controller
- High-quality build
- Multi-protocol
- Supports individually addressable strips
- Expensive
- Low total output
The Phoscon FLS-M, made by dresden elektronik, is a dual-protocol controller that supports both Matter over Wi-Fi and Zigbee 3.0. You can choose whichever protocol fits your setup, and Phoscon plans to add Matter over Thread in a future firmware update.
This controller accepts 5V, 12V, or 24V DC input. It outputs up to 6A per channel, with a matching 6A total across all channels combined. Beyond classic RGB and RGBCCT strips, the FLS-M also supports digitally addressable RGBICWW LEDs. It can mix classic and addressable strips at the same time.
Setup uses onboard DIP switches for quick configuration. A USB-C port is available for more detailed setup through a web configurator. On addressable strips, the FLS-M also supports animation effects. You can also split a single strip into separate lighting sections that are controlled independently.
Once connected to Homey Pro, Homey Pro mini, or Homey Self-Hosted Server over Matter, you can control color, white balance, and brightness, and build automations around it. The FLS-M is a high quality LED controller, and that shows in its price tag.
Shelly Plus RGBW PM
- Compact size
- Energy metering
- Supports local scripting
- RGBW only
The Shelly Plus RGBW PM is a Wi-Fi LED controller with four output channels for red, green, blue, and white. Unlike most controllers in this guide, it supports RGBW strips only rather than RGBCCT, so it doesn't have tunable white with separate warm and cool channels.
This controller accepts 12V or 24V DC input and outputs up to 4A per channel, for a total of 10A. A standout feature is built-in power measurement, tracking real-time voltage, current, and power per channel, something none of the other controllers in this guide offer.
It also supports local scripting and MQTT, along with up to 20 schedules and 20 webhooks, which gives advanced users a way to automate the controller outside of Homey too, if needed.
The Shelly Plus RGBW PM pairs directly to Homey Pro, Homey Pro mini, Homey Cloud, or Homey Self-Hosted Server over Wi-Fi. Once added, you can control color and brightness and include it in Flows and Moods.
Sunricher Matter LED Controller
- Wide 12-48V input
- Switchable mode
- High total output
- Difficult to find
The Sunricher SR-MF1025-5C is a Matter over Wi-Fi controller with an added RF control path, letting you use Sunricher RF remotes and wall switches alongside Matter control from Homey.
This controller accepts a wide 12-48V DC input and outputs up to 20A total at 12-24V, dropping to 15A at 48V. Output power scales with voltage, reaching 720W at 48V, 480W at 24V, and 240W at 12V, the highest power ceiling of any controller in this guide.
Beyond RF remotes, the controller also supports kinetic, self-powered wall switches, which generate their own power from the button press and don't need batteries or wiring back to a power source.
Homey Pro, Homey Pro mini, and Homey Self-Hosted Server all pair with it through Matter using a QR code. Once added, you get color control, white balance adjustment, and brightness control, along with the ability to use it in your favorite Flows.
Zemismart ZML3 LED Light Strip Driver
- Affordable
- Compact design
- High total output
- Firmware updates need Zemismart app
The Zemismart ZML3 is a compact Matter over Wi-Fi controller for RGBCCT LED strips. Despite its small size, it carries the highest total output current in this guide. The ZML3 is also a very affordable LED controller, retailing for €25.99 on various stores.
This controller runs on 12V or 24V DC input and outputs up to 5A per channel, for a total of 25A across its five channels. Color temperature is adjustable from 2700K to 6500K, alongside full RGB color control.
Zemismart has a growing presence in the Homey ecosystem. It also has a partnership with LG's smart home division to bring its app to more markets. The ZML3 itself pairs directly through Matter and you do not need the official Zemismart app to use it with Homey.
Setup uses a standard QR code for Matter pairing. Once connected to Homey Pro, Homey Pro mini, or Homey Self-Hosted Server, you can adjust color, white balance, and brightness, and use the controller in your automations.
Zooz ZEN56 RGBW Dimmer
- Small and compact
- 800-series chip
- Z-Wave repeater
- RGBW only
The Zooz ZEN56 is a Z-Wave dimmer for RGBW LED strips, built around an 800-series Z-Wave chip. It's the only Z-Wave controller in this guide, giving you an alternative to Zigbee and Matter if your setup already leans on Z-Wave devices.
This controller accepts 12-24V DC input and outputs up to 6A per channel, with a total of 10A across its four channels. The 800-series chip also improves efficiency, so the controller draws less standby power than older Z-Wave generations while still acting as a signal repeater for your mesh network.
The controller includes a multi-color LED indicator that shows communication status and confirms actions like factory resets, useful for troubleshooting during setup. It can also be wired to a momentary wall switch for multi-tap triggers, letting a single physical switch control different presets depending on how many times it's tapped.
For this one, only Homey Pro connects directly. Homey Pro mini, Homey Cloud, and Homey Self-Hosted Server all need Homey Bridge to bring it in. Once paired, you can control color and brightness and use it in Flows or Moods.
