Heimdall
Surveillance Mode changed.
Heimdall
Turn your Homey into a surveillance system
All detected motion and open/closed doors and windows on selected sensors will be seen by Heimdall. All these events will be logged and when Heimdall is in a Surveillance Mode the alarm will be triggered.
Supported Languages
🇬🇧 English
🇩🇰 Dansk
🇩🇪 Deutsch
🇪🇸 Español
🇫🇷 Français
🇮🇹 Italiano
🇳🇱 Nederlands
🇳🇴 Norsk
🇸🇪 Svenska
Supported Devices
• Any device that has motion detection, i.e. Fibaro Motion Sensor, Aeotec MultiSensor, Xiaomi Human Body Sensor etc.
• Any device that has contact detection, i.e. Fibaro Door/Window Sensor, Aeotec Recessed Door Sensor etc.
• Devices that don't have these capabilities can most likely be integrated by using a Virtual Device.
How do I get it to work?
• Add a Surveillance Mode Switch.
• Select the devices to monitor on the settings page.
• Add flows to activate and deactivate the desired Surveillance Mode.
• Add a flow with the desired actions when the alarm is triggered.
• Add a flow to deactivate the alarm.
• Add an Alarm Off Button
Please visit the Heimdall topic on the Athom Community Forum for more information, click on Visit forum >> under Community in the grey block below.
(Or copy this link and paste it in your browsers address bar: https://community.athom.com/t/134)
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
This card is triggered when the Surveillance Mode is changed, the new Mode is available in the Surveillance Mode tag.
Heimdall
Sensor active at arming.
This card is triggered when there is a sensor in active state when the Surveillance Mode is set to Armed or Partially Armed.
Heimdall
Sensor active at Status Check.
This card is triggered when there is a sensor in active state when a Sensor Check is run.
Heimdall
The alarm is activated.
This card is triggered when the Alarm State is activated. The Zone and Reason are available in the tags.
Heimdall
The alarm is deactivated.
This card is triggered when the Alarm State is deactivated. The way the Alarm State is deactivated is available in the Source tag.
Heimdall
The alarm delay is activated.
This card is triggered when the Alarm Delay is activated. The length of the delay, Zone and Reason are available in the tags.
Heimdall
The arming delay is activated.
This card is triggered when the Arming Delay is activated. The length of the delay is available in the Duration tag.
Heimdall
The time until alarm changed
This card is triggered when the Alarm Counter changes. The seconds left are available in the Seconds until alarm tag.
Heimdall
The time until armed changed
This card is triggered when the Arming Counter changes. The seconds left are available in the Seconds until armed tag.
Heimdall
A logline was written
This card is triggered when a line is written to the log for a device that has logging enabled. The Zone, Device and State are available in the tags.
Heimdall
Sensor tripped in Alarmstate
This card is triggered when a sensor is tripped while the Alarm State is active. The Zone, Device and State are available in the tags.
Heimdall
No information received
This card is triggered when a device has not communicated with Homey for 24 Hours. All devices are checked when changing the Surveillance Mode or using the Check Last Communication Flow card. The Duration, Last communicationtime, Zone and Device are available in the tags.
Mode
The state changed ...
And...
Heimdall
Surveillance mode is ...
Evaluates if the Surveillance Mode is a certain value.
Heimdall
Arming countdown active
Evaluates if an Arming Countdown is (not) active.
Heimdall
Alarm countdown active
Evaluates if an Alarm Countdown is (not) active.
Heimdall
Alarm state is active
Evaluates if the Alarm State is (not) active.
Heimdall
device is delayed
Evaluates if the chosen device has the delayed setting.
Heimdall
device is logged
Evaluates if the chosen device has the logged setting.
Heimdall
device is part of Full Surveillance Mode
Evaluates if the chosen device is used in the Full Surveillance Mode.
Heimdall
device is part of Partial Surveillance Mode
Evaluates if the chosen device is used in the Partial Surveillance Mode.
Mode
The state is ...
Then...
Alarm
Press the button
Heimdall
Send ... to Heimdall
The text that is sent to Heimdall will be written to Heimdalls history log.
Heimdall
Clear Heimdall history
Heimdall
Activate Alarm
Heimdall
Deactivate Alarm
Heimdall
Check Last Communication
Checks if devices that are included in a Surveillance Mode have communcicated with Homey in the last 24 hours. Make a flow with the triggercard No information received to process the results.
Heimdall
Check Status of all sensors
Checks the status of all Motion- and Door/Windows sensors. Make a flow with the triggercard Sensor active at Status Check to process the results.
Heimdall
Send ... to Timeline
Heimdall
Add Delay to device
Heimdall
Remove Delay from device
Heimdall
Add Logging to device
Heimdall
Remove Logging from device
Heimdall
Add device to Partial Surveillance Mode
Heimdall
Remove device from Partial Surveillance Mode
Heimdall
Add device to Full Surveillance Mode
Heimdall
Remove device from Full Surveillance Mode
Mode
Set state ...
Mode
Press the button
Mode
Set Surveillance Mode to ...
Support
Having an issue with this app? Contact the developer here.
What's new
Version 2.10.17 — • Added RDIF tag to user settings • Improved error handling
Heimdall
This app can manage your entire Homey.
Heimdall is not compatible with the selected Homey.
Heimdall will install on Homey shortly.
Changelog
We’ll send a thank you to Danee de Kruyff!
We’ll let Danee de Kruyff know you love the app. Maybe consider supporting Danee de Kruyff by making a donation?
Donate to Danee de Kruyff
The developer of Heimdall accepts donations.
Make a donation to say thanks!
