Group Gen1
Turned on
SG LEDDim
SG Smart dimmers, plugs and thermostats, without a gateway.
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
Supports SG LEDDim Smart. The first generation (@NDxxxx in Bluetooth) works reliably. Later generations, LEDDim Smart Pill, Smart Plug, Smart Socket and the HeatReg Smart floor thermostat are being tested. Share your experience in the forum thread.
Homey Pro controls the devices directly over Bluetooth. Set up the device in the SG app on your phone first. Homey does not add new devices to the network. Then add each device to Homey. You can turn devices on and off and adjust the brightness of dimmers. First-generation dimmers can also be grouped and kept connected for faster control and instant updates from the wall switch. HeatReg Smart shows room and floor temperatures and lets you set the target temperature.
Commands are encrypted with the network password, usually 1234. If Homey warns about the password, check Network Isolation in the SG app. Turn it off to use 1234, or enter your home's password in the settings for each device. Turning it off means all devices must be set up again in the SG app.
Requires Homey Pro. Does not support Homey Bridge or SG Smart 3.0. The latter can connect to Homey through SG Smart Gateway 3.0 and Matter. This app is unofficial and not made or supported by SG. Based on CSRmesh work by nkaminski, fromm1990, einaros and erlwes. Open source.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Group Gen1
Turned off
Group Gen1
The dim level changed
HeatReg Smart
The target temperature changed
HeatReg Smart
The temperature changes
HeatReg Smart
Turned on
HeatReg Smart
Turned off
HeatReg Smart
The thermostat mode changed to ...
HeatReg Smart
The power changed
HeatReg Smart
A problem is detected
HeatReg Smart
The problem is solved
HeatReg Smart
The floor temperature changed
HeatReg Smart
The preset changed
HeatReg Smart
Started heating
HeatReg Smart
Stopped heating
HeatReg Smart
The open window function started
HeatReg Smart
The open window function ended
HeatReg Smart
The floor limit was reached
HeatReg Smart
Floor limit no longer reached
LEDDim Smart
Turned on
LEDDim Smart
Turned off
LEDDim Smart
The dim level changed
LEDDim Smart
The signal strength changed
LEDDim Smart Pill
Turned on
LEDDim Smart Pill
Turned off
LEDDim Smart Pill
The dim level changed
Smart Plug and Smart Socket
Turned on
Smart Plug and Smart Socket
Turned off
Smart Plug and Smart Socket
The countdown is done
When a countdown started in Homey is up, and the plug has been sent off.
And...
Group Gen1
Is turned on
HeatReg Smart
Is turned on
HeatReg Smart
The thermostat mode is ...
HeatReg Smart
There is a problem
HeatReg Smart
Is heating
HeatReg Smart
The open window function is active
HeatReg Smart
The preset is Preset
LEDDim Smart
Is turned on
LEDDim Smart Pill
Is turned on
Smart Plug and Smart Socket
Is turned on
Smart Plug and Smart Socket
The countdown is running
Then...
Group Gen1
Turn on
Group Gen1
Turn off
Group Gen1
Toggle on or off
Group Gen1
Dim to %
Group Gen1
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
HeatReg Smart
Set the temperature °C
HeatReg Smart
Turn on
HeatReg Smart
Turn off
HeatReg Smart
Toggle on or off
HeatReg Smart
Set the thermostat mode to ...
HeatReg Smart
Choose the preset Preset
Only with "Control from Homey" on in the device's settings.
LEDDim Smart
Turn on
LEDDim Smart
Turn off
LEDDim Smart
Toggle on or off
LEDDim Smart
Dim to %
LEDDim Smart
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
LEDDim Smart Pill
Turn on
LEDDim Smart Pill
Turn off
LEDDim Smart Pill
Toggle on or off
LEDDim Smart Pill
Dim to %
LEDDim Smart Pill
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
Smart Plug and Smart Socket
Turn on
Smart Plug and Smart Socket
Turn off
Smart Plug and Smart Socket
Toggle on or off
Smart Plug and Smart Socket
Turn off in Minutes minutes
Homey counts down and turns the plug off when the time is up. A new countdown replaces the one running, and turning the plug off in Homey cancels it.
Smart Plug and Smart Socket
Turn on for Minutes minutes
Turns the plug on now, and off when the time is up. Turning it off in Homey cancels the countdown.
Smart Plug and Smart Socket
Cancel the countdown
Support
Having an issue with this app? Contact the developer via the developer website.
What’s new
Version 2.6.0 — Later generations of LEDDim Smart and LEDDim Smart Pill can now be added and controlled. Smart Plug and Smart Socket can be added, with on and off and a countdown. HeatReg Smart floor thermostats can be added: Homey shows the temperatures and can set the target temperature, on and off and the preset. All of these are being tested. New instructions before searching for devices. The settings have been cleaned up, and you can now view and copy the log there.
SG LEDDim
SG LEDDim is not compatible with the selected Homey.
SG LEDDim will install on Homey shortly.
Changelog
We’ll send a thank you to Trond Bildøy!
We’ll let Trond Bildøy know you love the app.
Your suggestion has been sent
We’ll notify Trond Bildøy you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
