Garage Door
Closed
Garage Gateway
Control iSmartGate and GogoGate2 garage doors and gates locally — no cloud required. Supports multiple hubs.
Bring your iSmartGate or GogoGate2 garage door controller into Homey and automate it like any other smart device. Open, close, and monitor each door in real time, get notified when a door is left open, and trigger flows the moment a door opens or closes — all over your local network, no cloud round-trip required.
Compatible with iSmartGate PRO (up to 3 doors), iSmartGate LITE, iSmartGate MINI, and the original GogoGate2 controller. Pair the hub once using its IP address, mDNS name, or UDI remote address, then add each configured door as its own device. Wireless tilt sensors automatically surface as temperature and battery capabilities; wired sensors just report Open or Closed.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Garage Door
Opened
Garage Door
Which door? opened
Garage Door
Which door? closed
Garage Door
Which door? was left open
Garage Door
Which door? started opening
Fires when an open command is sent. The hub only reports the final open/closed state, so this reflects app- and flow-initiated commands.
Garage Door
Which door? started closing
Fires when a close command is sent. The hub only reports the final open/closed state, so this reflects app- and flow-initiated commands.
Garage Door
Which door? status changed
Gate
Closed
Gate
Opened
Gate
Which gate? opened
Gate
Which gate? closed
Gate
Which gate? was left open
Gate
Which gate? started opening
Fires when an open command is sent. The hub only reports the final open/closed state, so this reflects app- and flow-initiated commands.
Gate
Which gate? started closing
Fires when a close command is sent. The hub only reports the final open/closed state, so this reflects app- and flow-initiated commands.
Gate
Which gate? status changed
iSmartGate / GogoGate2 Hub
Is disconnected
iSmartGate / GogoGate2 Hub
Is connected
And...
Garage Door
Is closed
Garage Door
... is open
Garage Door
... is closed
Gate
Is closed
Gate
... is open
Gate
... is closed
iSmartGate / GogoGate2 Hub
Is connected
Then...
Garage Door
Close
Garage Door
Open
Garage Door
Toggle open or closed
Garage Door
Toggle ...
Opens the door if it is closed, or closes it if it is open.
Gate
Close
Gate
Open
Gate
Toggle open or closed
Gate
Toggle ...
Opens the gate if it is closed, or closes it if it is open. Sensor-backed gates only.
Gate
Pulse ...
Sends a single activation pulse. Use for momentary/pulse gates that toggle on each press.
Support
Having an issue with this app? Contact the developer via the developer website.
What’s new
Version 1.0.7 — Flow triggers now fire correctly: the Opened, Closed, Left-open, Opening, Closing and Status-changed cards for doors and gates run at the real moment the door finishes moving — previously they were silently blocked and never fired at all. Door status is also far more accurate while the door is in motion, correctly showing Opening and Closing during travel. GogoGate2 is now a fully supported device. And if you have more than one iSmartGate or GogoGate2, you can add multiple hubs — with more than one paired, doors and gates are labelled with their hub name so they are easy to tell apart.
Garage Gateway
Garage Gateway is not compatible with the selected Homey.
Garage Gateway will install on Homey shortly.
Changelog
We’ll send a thank you to Fred Hill!
We’ll let Fred Hill know you love the app.
Your suggestion has been sent
We’ll notify Fred Hill you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
