WARP Charger

Charge with sunshine, steered by Homey
Charge with sunshine, steered by Homey

Läs mer ›

Enheter som stöds

Flow-kort

Klicka på en enhet ovan för att visa endast relaterade Flow-kort.

När...

WARP Charger
Började ladda
WARP Charger
Slutade ladda
WARP Charger
Laddningsstatus för EV-laddaren har ändrats ...
WARP Charger
Strömmen ändrades
WARP Charger
Det generiska larmet är aktiverat
WARP Charger
Det generiska larmet är inaktiverat
WARP Charger
A vehicle was connected
WARP Charger
The vehicle was disconnected
WARP Charger
The status changed
WARP Charger
An error occurred
WARP Charger
The charge mode changed
WARP Charger
An NFC tag was presented
i
Only for wallboxes with NFC.
WARP Charger
A charging session ended
i
Fires when the vehicle is disconnected. Energy is only available on wallboxes with a meter (Pro).
WARP Charger
Vehicle charge reached Charge level %
i
Only WARP4 Pro with ISO 15118.
WARP Energy Manager
Strömmen ändrades
WARP Energy Manager
Grid power changed
WARP Energy Manager
Grid import rose above Power W
WARP Energy Manager
Feed-in rose above Power W
WARP Energy Manager
PV surplus rose above Power W
WARP Energy Manager
PV surplus fell below Power W
WARP Energy Manager
Electricity price fell below Price (ct/kWh) ct
i
Needs a dynamic tariff in the WARP device.
WARP Energy Manager
Electricity price rose above Price (ct/kWh) ct
i
Needs a dynamic tariff in the WARP device.
WARP Energy Manager
The charge mode changed
WARP Energy Manager
Input Input was State
WARP Energy Manager
§14a limit started
WARP Energy Manager
§14a limit ended

Och...

WARP Charger
Laddar
WARP Charger
Laddningsstatus för EV-laddaren är ...
WARP Charger
Det generiska larmet är på
WARP Charger
Vehicle is connected
WARP Charger
Charge mode is Charge mode
WARP Charger
Charging with Phases
WARP Energy Manager
Feeding into the grid
WARP Energy Manager
Electricity price is below Price (ct/kWh) ct
WARP Energy Manager
Now is among the Hours cheapest hours of today
WARP Energy Manager
Relay Relay is on
WARP Energy Manager
Charge mode is Charge mode
WARP Energy Manager
§14a limit is active

Då...

WARP Charger
Starta laddning
WARP Charger
Avsluta laddning
WARP Charger
Set current limit to Current A
i
Upper limit. If an Energy Manager controls the wallbox, it distributes the current below this limit.
WARP Charger
Set charge mode to Charge mode
i
Sets the mode for this wallbox only. If an Energy Manager controls the wallbox, its next mode change applies to all wallboxes again.
WARP Charger
Switch to Phases
i
Only if the wallbox allows external phase switching and the option is enabled in the device settings.
WARP Charger
Turn boost mode State
i
Not possible while the device is set to display only.
WARP Charger
Limit charging time to Duration
i
Not possible while the device is set to display only.
WARP Charger
Limit charging energy to Energy kWh
i
Only wallboxes with a meter (Pro). 0 = no limit.
WARP Charger
Charge vehicle up to Charge level %
i
Only WARP4 Pro with ISO 15118. 0 = no limit.
WARP Charger
Charge Charging hours h, ready Departure at Time
i
Only for wallboxes without an Energy Manager. Otherwise use the Energy Manager card.
WARP Charger
Turn off Eco charge plan
i
Only for wallboxes without an Energy Manager. Otherwise use the Energy Manager card.
WARP Charger
Send Number as Value to API meter, Sign
i
Writes a value into an API meter of the WARP device, for values WARP cannot read itself. The list shows exactly the values set up for the meter in the WARP web interface. Must be allowed in the device settings under "API meter". WARP expects all values of a meter at once: values not sent by Homey yet keep their current reading (or 0).
WARP Energy Manager
Set charge mode to Charge mode
i
Not possible while the device is set to display only.
WARP Energy Manager
Switch to Phases
i
Only if the Energy Manager allows external phase switching and the option is enabled in the device settings.
WARP Energy Manager
Switch relay Relay State
i
Energy Manager 2.0 only. Needs “Control relays and SG Ready” in the device settings.
WARP Energy Manager
Switch SG Ready Output State
i
Energy Manager 2.0 only. Needs “Control relays and SG Ready” in the device settings. Not possible while the output is used by the heating control.
WARP Energy Manager
Allow Current A for all wallboxes
i
Not possible while the device is set to display only.
WARP Energy Manager
Charge Charging hours h, ready Departure at Time
i
Uses the cheapest hours (dynamic tariff required).
WARP Energy Manager
Turn off Eco charge plan
i
Not possible while the device is set to display only.
WARP Energy Manager
Send Number as Value to API meter, Sign
i
Writes a value into an API meter of the WARP device, for values WARP cannot read itself. The list shows exactly the values set up for the meter in the WARP web interface. Must be allowed in the device settings under "API meter". WARP expects all values of a meter at once: values not sent by Homey yet keep their current reading (or 0).

Widgetar

Du kan lägga till den här appens widgetar på din instrumentpanel eller hemskärm i mobilappen.

Charging history
Charging history
Charge manager
Charge manager
Charge mode
Charge mode
Energy flow
Energy flow
Energy flow compact
Energy flow compact
Phase load
Phase load
Electricity price today
Electricity price today
PV surplus
PV surplus
Wallbox status
Wallbox status

Support

Utvecklaren av den här appen erbjuder ingen direktsupport.

Vad är nytt?

Version 1.0.20 — New app image. The condition "has an error" was removed; use Homey's standard error card instead.

Visa ändringslogg

WARP Charger

WARP Charger är inte kompatibelt med vald Homey.

WARP Charger installeras på Homey inom kort.
Installera