myenergi

Sustainable future through eco-smart technology.
Sustainable future through eco-smart technology.

Czytaj więcej ›

Obsługiwane urządzenia

Karty Flow

Kliknij na urządzenie powyżej, aby wyświetlić tylko powiązane karty Flow.

Kiedy...

Eddi
Włączone
Eddi
Wyłączone
Eddi
Zmiana w liczniku mocy
Eddi
Zmiana mocy
Eddi
Zmiana poziomu napięcia
Eddi
Zmieniła się częstotliwość
Eddi
Temperature of Probe changed
i
When the chosen Eddi temperature probe reports a new temperature. Probes that are not connected are ignored.
Harvi
Zmiana w liczniku mocy
Harvi
Zmiana mocy
Libbi
Zmienił się poziom baterii
Libbi
Stan ładowania baterii uległ zmianie ...
Libbi
Zmiana mocy
Libbi
Zmiana poziomu napięcia
Libbi
Zmieniła się częstotliwość
Zappi
Włączone
Zappi
Wyłączone
Zappi
Rozpoczęto ładowanie
Zappi
Zatrzymano ładowanie
Zappi
Stan ładowania ładowarki EV uległ zmianie ...
Zappi
Zmiana mocy
Zappi
Zmiana prądu elektrycznego
Zappi
Zmiana poziomu napięcia
Zappi
Zmieniła się częstotliwość
Zappi
Zmiana w liczniku mocy
Zappi
Charging started
i
When Zappi starts charging the connected car
Zappi
Charging stopped
i
When Zappi stops charging the connected car
Zappi
Charge mode changed
i
When Zappi changed the charge mode
Zappi
Charger status changed
i
When Zappi changed the charger status
Zappi
Boost mode changed
i
When Zappi changed the boost mode
Zappi
EV connected
i
When the EV is connected to Zappi
Zappi
EV disconnected
i
When the EV is disconnected from Zappi

Oraz...

Eddi
Jest włączone
Libbi
Stan ładowania baterii to ...
Libbi
Charge from grid is turned on
i
Checks if the Libbi is allowed to charge from the grid
Zappi
Jest włączone
Zappi
Jest w trakcie ładowania
Zappi
Stan ładowania ładowarki EV to ...
Zappi
Car is charging
i
Checks if the car is currently being charged by Zappi
Zappi
An EV is connected
i
Checks if an EV is connected to the Zappi
Zappi
The charger is locked
i
Checks if the Zappi is currently locked
Zappi
Charge mode is Charge Mode
i
Checks the current charge mode of the Zappi

Wtedy...

Eddi
Włącz
Eddi
Wyłącz
Eddi
Przełącz na wł. lub wył.
Eddi
Boost Heater
i
Heats at full power for the chosen duration, regardless of solar export. Rounded to whole minutes; 1 hour if no duration is set.
Eddi
Stop boosting Heater
i
Cancels a running manual boost.
Eddi
Reset energy meter (Total)
i
Resets the total accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Harvi
Reset energy meter
i
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Libbi
Set Libbi mode to Libbi Mode
i
Change the Libbi operating mode. Only Normal, Stopped and Export can be set through the myenergi API.
Libbi
Turn charge from grid Charge from grid
i
Allow the Libbi to charge from the grid. It only charges up to the charge target, and only during the cheap periods of the tariff set in the myenergi app.
Libbi
Set charge target to Charge target kWh
i
How much energy the Libbi should hold when it charges from the grid.
Libbi
Set the price to Cheap price in Cheap periods and Normal price the rest of the day
i
Replaces the dual rate tariff in the myenergi app, for all days. The Libbi charges from the grid in the cheapest periods. Periods are written like 23:45-05:00, 13:00-17:00. Use the same price twice to let it charge at any time.
Zappi
Włącz
Zappi
Wyłącz
Zappi
Przełącz na wł. lub wył.
Zappi
Rozpoczęcie ładowania
Zappi
Zatrzymanie ładowania
Zappi
Unlock the charger
i
Allow a charge session on a locked Zappi, the same as the unlock in the myenergi app.
Zappi
Start charging the car
Zappi
Stop charging the car
Zappi
Set charge mode to Charge Mode
Zappi
Set minimum green level to Minimum green level
Zappi
Select charge mode to Select Charge Mode
Zappi
Reset energy meter
i
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Zappi
Set phase setting to Phase Setting
i
Switch the Zappi between single phase, three phase or automatic phase charging. Requires a three phase Zappi with firmware that supports phase switching.
Zappi
Set Boost mode to Boost Mode. End boost after kWh kWh, before Complete time o'clock for SMART
Zappi
Set a single charge of kWh kWh for Vehicle Day, between From and To
i
A one-off charge where myenergi picks the cheapest times in the window from the tariff on your myenergi account. It replaces the single charge Homey set earlier and keeps the ones made in the myenergi app. Needs the myenergi account sign-in under the app settings, and a Zappi that supports schedules.
Zappi
Remove the single charge set by Homey
i
Single charges made in the myenergi app are kept.

Pomoc

Masz problem z tą aplikacją? Skontaktuj się z twórcami aplikacji tutaj.

Nowości

Wersja 2.4.18 — Setup: sign in with your myenergi account under the app settings and your hub serial numbers and API keys are filled in for you. Libbi: charge from grid can now be turned on and off, and the charge target set, from the device and from flows. A new flow card sets the cheap tariff periods the Libbi charges from the grid in. Zappi: new flow cards to set and remove a single charge, where myenergi picks the cheapest times. The Libbi and single charge features need the myenergi account sign-in.

Zobacz listę zmian

myenergi

myenergi nie jest kompatybilna z wybranym Homey.

myenergi zostanie wkrótce zainstalowana na Homey.
Zainstaluj