myenergi

Sustainable future through eco-smart technology.
Sustainable future through eco-smart technology.

Lire plus ›

Appareils pris en charge

Cartes Flow

Cliquez sur un appareil ci-dessus pour afficher uniquement les cartes Flow associées.

Quand...

Eddi
Activé
Eddi
Désactivé
Eddi
Le compteur électrique a changé
Eddi
L'énergie a changé
Eddi
Le voltage a changé
Eddi
La fréquence a changé
Eddi
Temperature of Probe changed
i
When the chosen Eddi temperature probe reports a new temperature. Probes that are not connected are ignored.
Harvi
Le compteur électrique a changé
Harvi
L'énergie a changé
Libbi
Le niveau de la batterie a changé
Libbi
L'état de charge de la batterie a changé ...
Libbi
L'énergie a changé
Libbi
Le voltage a changé
Libbi
La fréquence a changé
Zappi
Activé
Zappi
Désactivé
Zappi
Charge démarrée
Zappi
Charge arrêtée
Zappi
L'état de charge du chargeur VE a changé ...
Zappi
L'énergie a changé
Zappi
Le courant électrique a changé
Zappi
Le voltage a changé
Zappi
La fréquence a changé
Zappi
Le compteur électrique a changé
Zappi
Charging started
i
When Zappi starts charging the connected car
Zappi
Charging stopped
i
When Zappi stops charging the connected car
Zappi
Charge mode changed
i
When Zappi changed the charge mode
Zappi
Charger status changed
i
When Zappi changed the charger status
Zappi
Boost mode changed
i
When Zappi changed the boost mode
Zappi
EV connected
i
When the EV is connected to Zappi
Zappi
EV disconnected
i
When the EV is disconnected from Zappi

Et...

Eddi
Est activé
Libbi
L'état de charge de la batterie est ...
Libbi
Charge from grid is turned on
i
Checks if the Libbi is allowed to charge from the grid
Zappi
Est activé
Zappi
N'est en cours de charge
Zappi
L'état de charge du chargeur VE est ...
Zappi
Car is charging
i
Checks if the car is currently being charged by Zappi
Zappi
An EV is connected
i
Checks if an EV is connected to the Zappi
Zappi
The charger is locked
i
Checks if the Zappi is currently locked
Zappi
Charge mode is Charge Mode
i
Checks the current charge mode of the Zappi

Alors...

Eddi
Activer
Eddi
Désactiver
Eddi
Alterner activé ou désactivé
Eddi
Boost Heater
i
Heats at full power for the chosen duration, regardless of solar export. Rounded to whole minutes; 1 hour if no duration is set.
Eddi
Stop boosting Heater
i
Cancels a running manual boost.
Eddi
Reset energy meter (Total)
i
Resets the total accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Harvi
Reset energy meter
i
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Libbi
Set Libbi mode to Libbi Mode
i
Change the Libbi operating mode. Only Normal, Stopped and Export can be set through the myenergi API.
Libbi
Turn charge from grid Charge from grid
i
Allow the Libbi to charge from the grid. It only charges up to the charge target, and only during the cheap periods of the tariff set in the myenergi app.
Libbi
Set charge target to Charge target kWh
i
How much energy the Libbi should hold when it charges from the grid.
Libbi
Set the price to Cheap price in Cheap periods and Normal price the rest of the day
i
Replaces the dual rate tariff in the myenergi app, for all days. The Libbi charges from the grid in the cheapest periods. Periods are written like 23:45-05:00, 13:00-17:00. Use the same price twice to let it charge at any time.
Zappi
Activer
Zappi
Désactiver
Zappi
Alterner activé ou désactivé
Zappi
Démarrer la charge
Zappi
Arrêter la charge
Zappi
Unlock the charger
i
Allow a charge session on a locked Zappi, the same as the unlock in the myenergi app.
Zappi
Start charging the car
Zappi
Stop charging the car
Zappi
Set charge mode to Charge Mode
Zappi
Set minimum green level to Minimum green level
Zappi
Select charge mode to Select Charge Mode
Zappi
Reset energy meter
i
Resets the accumulated energy value (kWh) to zero. Use with a schedule, e.g. every midnight, to get daily energy readings.
Zappi
Set phase setting to Phase Setting
i
Switch the Zappi between single phase, three phase or automatic phase charging. Requires a three phase Zappi with firmware that supports phase switching.
Zappi
Set Boost mode to Boost Mode. End boost after kWh kWh, before Complete time o'clock for SMART
Zappi
Set a single charge of kWh kWh for Vehicle Day, between From and To
i
A one-off charge where myenergi picks the cheapest times in the window from the tariff on your myenergi account. It replaces the single charge Homey set earlier and keeps the ones made in the myenergi app. Needs the myenergi account sign-in under the app settings, and a Zappi that supports schedules.
Zappi
Remove the single charge set by Homey
i
Single charges made in the myenergi app are kept.

Assistance

Vous avez un problème avec cette appli ? Contacter le développeur ici.

Nouveautés

Version 2.4.18 — Setup: sign in with your myenergi account under the app settings and your hub serial numbers and API keys are filled in for you. Libbi: charge from grid can now be turned on and off, and the charge target set, from the device and from flows. A new flow card sets the cheap tariff periods the Libbi charges from the grid in. Zappi: new flow cards to set and remove a single charge, where myenergi picks the cheapest times. The Libbi and single charge features need the myenergi account sign-in.

Afficher le journal des modifications

myenergi

myenergi n’est pas compatible avec le Homey sélectionné.

myenergi va s’installer sur Homey dans un instant.
Installer