Marstek Energy Storage

Control and monitor Marstek energy storage systems via Modbus TCP
Control and monitor Marstek energy storage systems via Modbus TCP

Czytaj więcej ›

Obsługiwane urządzenia

Karty Flow

Kliknij na urządzenie powyżej, aby wyświetlić tylko powiązane karty Flow.

Kiedy...

Venus D
Włączone
Venus D
Wyłączone
Venus D
Zmiana poziomu napięcia
Venus D
Zmiana prądu elektrycznego
Venus D
Zmiana mocy
Venus D
Zmiana temperatury
Venus D
Stan ładowania baterii uległ zmianie ...
Venus D
Alarm ogólny włączony
Venus D
Alarm ogólny wyłączony
Venus D
Odłączony
Venus D
Połączony
Venus D
Zmienił się poziom baterii
Venus D
Moc docelowa uległa zmianie
Venus D
Tryb mocy docelowej zmienił się na ...
i
„Homey“ oznacza, że Homey steruje mocą docelową urządzenia. Pozostałe tryby są określane przez urządzenie.
Venus D
Charging status changed
Venus D
Battery started charging
Venus D
Battery started discharging
Venus D
Battery level dropped below threshold
Venus D
Battery level rose above threshold
Venus D
Battery temperature too high
Venus D
Battery temperature too low
Venus D
Battery backup mode changed to Mode
i
Triggered when battery backup mode is enabled or disabled
Venus D
Force charge mode changed to Mode
i
Triggered when force charge mode changes
Venus D
Operation mode changed to Mode
i
Triggered when battery operation mode changes
Venus D
Force charge power changed to Power (W) W
i
Triggered when force charge power setting changes
Venus D
Force discharge power changed to Power (W) W
i
Triggered when force discharge power setting changes
Venus D
Force SOC target changed to SOC Target (%)%
i
Triggered when force SOC target setting changes
Venus D
Battery fault detected
i
Triggered when any battery fault is detected
Venus D
Battery warning detected
i
Triggered when any battery warning is detected
Venus D
Grid fault detected
i
Triggered when grid-related faults are detected
Venus D
Battery system fault detected
i
Triggered when battery system faults are detected
Venus E
Włączone
Venus E
Wyłączone
Venus E
Zmiana poziomu napięcia
Venus E
Zmiana prądu elektrycznego
Venus E
Zmiana mocy
Venus E
Alarm ogólny włączony
Venus E
Alarm ogólny wyłączony
Venus E
Odłączony
Venus E
Połączony
Venus E
Zmiana temperatury
Venus E
Stan ładowania baterii uległ zmianie ...
Venus E
Zmienił się poziom baterii
Venus E
Moc docelowa uległa zmianie
Venus E
Tryb mocy docelowej zmienił się na ...
i
„Homey“ oznacza, że Homey steruje mocą docelową urządzenia. Pozostałe tryby są określane przez urządzenie.
Venus E
Charging status changed
Venus E
Battery started charging
Venus E
Battery started discharging
Venus E
Battery level dropped below threshold
Venus E
Battery level rose above threshold
Venus E
Battery fault detected
i
Triggered when any battery fault is detected
Venus E
Battery warning detected
i
Triggered when any battery warning is detected
Venus E
Grid fault detected
i
Triggered when grid-related faults are detected
Venus E
Battery system fault detected
i
Triggered when battery system faults are detected
Venus E
Hardware fault detected
i
Triggered when hardware faults are detected
Venus E
System fault detected
i
Triggered when system faults are detected
Venus E
Battery temperature too high
Venus E
Battery temperature too low
Venus E
Battery backup mode changed to Mode
i
Triggered when battery backup mode is enabled or disabled
Venus E
Force charge mode changed to Mode
i
Triggered when force charge mode changes
Venus E
Operation mode changed to Mode
i
Triggered when battery operation mode changes
Venus E
Force charge power changed to Power (W) W
i
Triggered when force charge power setting changes
Venus E
Force discharge power changed to Power (W) W
i
Triggered when force discharge power setting changes
Venus E
Force SOC target changed to SOC Target (%)%
i
Triggered when force SOC target setting changes

Oraz...

Venus D
Jest włączone
Venus D
Stan ładowania baterii to ...
Venus D
Alarm ogólny jest włączony
Venus D
Jest połączony
Venus D
Tryb mocy docelowej jest ...
i
„Homey“ oznacza, że Homey steruje mocą docelową urządzenia. Pozostałe tryby są określane przez urządzenie.
Venus D
Battery backup mode is Mode
i
Check if battery backup mode is enabled or disabled
Venus D
Force charge mode is Mode
i
Check current force charge mode
Venus D
Operation mode is Mode
i
Check current battery operation mode
Venus D
Force charge power is greater than Power (W) W
i
Check if force charge power is above a threshold
Venus D
Force discharge power is greater than Power (W) W
i
Check if force discharge power is above a threshold
Venus D
Force SOC target is greater than SOC Target (%)%
i
Check if force SOC target is above a threshold
Venus D
Battery is charging
Venus D
Battery is discharging
Venus D
Battery level is above Percentage (%)%
Venus D
Battery level is below Percentage (%)%
Venus D
Temperature is above Temperature (°C)°C
Venus D
Max charge power limit is below Power (W) W
i
Check if the device protection system is limiting charge power below a threshold (e.g. due to low temperature)
Venus D
Max discharge power limit is below Power (W) W
i
Check if the device protection system is limiting discharge power below a threshold (e.g. due to low temperature)
Venus D
Charging cutoff SOC is above Percentage (%)%
i
Check if the charging cutoff SOC setting is above a threshold
Venus D
Discharging cutoff SOC (reserve) is above Percentage (%)%
i
Check if the discharging cutoff SOC (reserve) setting is above a threshold
Venus D
Battery has a fault
Venus E
Jest włączone
Venus E
Alarm ogólny jest włączony
Venus E
Jest połączony
Venus E
Stan ładowania baterii to ...
Venus E
Tryb mocy docelowej jest ...
i
„Homey“ oznacza, że Homey steruje mocą docelową urządzenia. Pozostałe tryby są określane przez urządzenie.
Venus E
Battery backup mode is Mode
i
Check if battery backup mode is enabled or disabled
Venus E
Force charge mode is Mode
i
Check current force charge mode
Venus E
Operation mode is Mode
i
Check current battery operation mode
Venus E
Force charge power is greater than Power (W) W
i
Check if force charge power is above a threshold
Venus E
Force discharge power is greater than Power (W) W
i
Check if force discharge power is above a threshold
Venus E
Force SOC target is greater than SOC Target (%)%
i
Check if force SOC target is above a threshold
Venus E
Battery is charging
Venus E
Battery is discharging
Venus E
Battery level is above Percentage (%)%
Venus E
Battery level is below Percentage (%)%
Venus E
Battery has a fault
Venus E
Temperature is above Temperature (°C)°C
Venus E
Max charge power limit is below Power (W) W
i
Check if the device protection system is limiting charge power below a threshold (e.g. due to low temperature)
Venus E
Max discharge power limit is below Power (W) W
i
Check if the device protection system is limiting discharge power below a threshold (e.g. due to low temperature)
Venus E
Charging cutoff SOC is above Percentage (%)%
i
Check if the charging cutoff SOC setting is above a threshold
Venus E
Discharging cutoff SOC (reserve) is above Percentage (%)%
i
Check if the discharging cutoff SOC (reserve) setting is above a threshold

Wtedy...

Venus D
Włącz
Venus D
Wyłącz
Venus D
Przełącz na wł. lub wył.
Venus D
Ustaw moc docelową W
i
To również przełącza tryb mocy docelowej na Homey. W przypadku ładowarek EV ładowanie jest automatycznie uruchamiane lub zatrzymywane.
Venus D
Ustaw tryb mocy docelowej na ...
i
Aby sterować mocą docelową tego urządzenia przez Homey, wybierz „Homey“. Pozostałe tryby są określane przez urządzenie.
Venus D
Set battery backup mode to Mode
i
Enable or disable battery backup mode
Venus D
Set force SOC target to SOC Target (%)%
i
Set target SOC setting for force (dis)charge
Venus D
Set charging cutoff SOC to Percentage (%)%
i
Set the SOC level at which charging stops (40-100%)
Venus D
Set discharging cutoff SOC to Percentage (%)%
i
Set the SOC reserve level below which discharging stops (12-30%). WARNING: Setting this below 15% is not recommended as it may reduce battery lifespan.
Venus E
Włącz
Venus E
Wyłącz
Venus E
Przełącz na wł. lub wył.
Venus E
Ustaw moc docelową W
i
To również przełącza tryb mocy docelowej na Homey. W przypadku ładowarek EV ładowanie jest automatycznie uruchamiane lub zatrzymywane.
Venus E
Ustaw tryb mocy docelowej na ...
i
Aby sterować mocą docelową tego urządzenia przez Homey, wybierz „Homey“. Pozostałe tryby są określane przez urządzenie.
Venus E
Set battery backup mode to Mode
i
Enable or disable battery backup mode
Venus E
Set force SOC target to SOC Target (%)%
i
Set target SOC setting for force (dis)charge
Venus E
Set charging cutoff SOC to Percentage (%)%
i
Set the SOC level at which charging stops (40-100%)
Venus E
Set discharging cutoff SOC to Percentage (%)%
i
Set the SOC reserve level below which discharging stops (12-30%). WARNING: Setting this below 15% is not recommended as it may reduce battery lifespan.

Pomoc

Masz problem z tą aplikacją? Skontaktuj się z twórcami aplikacji tutaj.

Nowości

Wersja 1.5.10 — Venus D: measure_power.battery is now available as a derived value. Native register 32102 returns garbage on Venus D hardware even on the working v147 firmware, so the driver skipped it entirely and users had no battery-power tile at all where Venus E users have one out of the box. Now reconstructed as MPPT_sum + (-measure_power) - solar in plus net AC contribution equals what the battery is receiving. Same charging-positive sign convention Venus E uses. Cap picks up automatically on existing devices via repairCapabilities.

Zobacz listę zmian

Marstek Energy Storage

Marstek Energy Storage nie jest kompatybilna z wybranym Homey.

Marstek Energy Storage zostanie wkrótce zainstalowana na Homey.
Zainstaluj