Bosch eBike
Batterinivået ble endret
Bosch eBike
Keep an eye on your eBike's battery, range and charging
Monitor your Bosch Smart System eBike directly from Homey. Keep track of your battery level, remaining range in all assist modes (Eco, Tour, Sport and Turbo), odometer, motor hours, charge cycles, and per-mode riding statistics — all updated automatically every 5 minutes.
Connect once using your Bosch account and Homey will continuously sync your bike's data from the Bosch cloud. Use Flow cards to get notified when your battery is low, when charging starts or stops, or to automate anything based on your bike's status. Full hardware details including battery, motor, and component serial numbers are available in the device settings.
This is an unofficial community app and is not endorsed by or affiliated with Bosch eBike Systems. It requires a Bosch Smart System eBike with the ConnectModule and an active Flow+ subscription.
Støttede enheter
Flow-kort
Klikk på en enhet ovenfor for å kun vise relaterte Flow-kort.
Når …
Bosch eBike
eBike battery rises above %%
Triggers when the battery level rises above a specified percentage, e.g. to switch off a charger wall plug at 80%.
Bosch eBike
eBike battery drops below %%
Triggers when the battery level drops below a specified percentage.
Bosch eBike
eBike charging started
Triggers when the eBike is plugged in and starts charging.
Bosch eBike
eBike charging stopped
Triggers when the eBike is unplugged or charging finishes.
Bosch eBike
eBike location updated
Triggers on every new location report from the ConnectModule, including while riding or charging. Combine with your own conditions (e.g. 'and I am not home') for custom anti-theft flows. For the filtered version, use the 'possible alarm' card instead. Tip: enable Bosch eBike Lock so a thief cannot simply power on and ride. Requires a ConnectModule with the eBike Alarm feature; checked every 5 minutes.
Bosch eBike
eBike location changed (possible alarm)
Triggers when the ConnectModule reports a new location while the bike is idle (not charging and not being ridden). The ConnectModule reports when the bike is powered on, charging, or its motion alarm fires - so an unexpected report can indicate the bike is being moved. Enable Bosch eBike Lock so a thief cannot simply power on and ride, which would suppress this card; the 'eBike location updated' card fires unconditionally if you prefer your own conditions. Requires a ConnectModule with the eBike Alarm feature. Detection is delayed by the polling interval (up to 5 minutes).
Bosch eBike
A new ride was recorded
Triggers when a new ride appears in your Bosch ride history. Rides sync to the Bosch cloud after the bike is powered off, so this can lag the actual ride. Checked every 30 minutes.
Og …
Bosch eBike
eBike battery is above %%
Bosch eBike
eBike is charging
Kontrollprogrammer
Støtte
Har du et problem med denne appen? Kontakt utvikleren her.
Nyheter
Versjon 1.1.4 — Removed the Homey API permission - widget device selection now resolves app-side
Bosch eBike
Bosch eBike er ikke kompatibel med den valgte Homey.
Bosch eBike vil straks installeres på Homey.
Endringslogg
Vi sender en takk til Gonçalo Barradas!
Vi lar Gonçalo Barradas vite at du elsker appen.
Forslaget ditt er sendt
Vi vil varsle Gonçalo Barradas om at du har sendt et forslag.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
