The Homevolt app for Homey helps you getting a better understanding of your Homey Energy utilization by connecting your Homevolt battery and power sensors to Homey.
Monitor your charge level, charge/discharge pattern and even grid frequency from the Homey app.
This app requires:
- A Homevolt battery connected to your local network
- The webserver enabled on your Homevolt battery
- Https to be disabled
- Password (local auth) to be disabled
GETTING STARTED
1. Ensure the local web server is enabled (without password)
2. Install the Homevolt for Homey app
3. Add your Homevolt battery and sensors
4. Make sure you configure your sensors as per your requirement. If the Grid sensor is your only incoming measurement, feel free to use that. If not, disable the contribution to home energy in the advanced settings.
CONSIDERATIONS & LIMITATIONS
- This app is using the local webserver to poll data.
- This is an unsanctioned, non supported API and may break at any point in time.
- This app is not affiliated with Homevolt/Tibber/Polarium.
- Auth is not supported. Password needs to be disabled on the local web server.
- No scheduling support (yet).
- Pairing (mdns discovery) parses the hostname to detect a Homevolt device and serial number. If you change this pairing will likely fail.
Klik op een apparaat hierboven om gerelateerde Flow kaarten te zien.
Als...
Homevolt battery
Het accuniveau is veranderd
Homevolt battery
Het vermogen is veranderd
Homevolt battery
De temperatuur verandert
Homevolt battery
De frequentie is veranderd
Homevolt battery
Batterijstatus gewijzigd
i
Activeert wanneer de batterijstatus verandert, bijvoorbeeld opladen -> inactief.
Homevolt sensors
Het vermogen is veranderd
Homevolt sensors
De signaalsterkte is veranderd
En...
Homevolt battery
Toestand is Status
i
Controleert of de huidige batterijstatus overeenkomt met een specifieke status.
Ondersteuning
Heb je een probleem met deze app?
Neem contact op met de ontwikkelaar, klik hier.
Wat is nieuw
Versie 1.1.0 — Changed behavior of charge/discharge to align with homey guidelines and work better in homey energy. Power & Target Power values are now negated (-power, -targetPower). No change to discharge/charge states or anything else.