Marstek Energy Storage

Control and monitor Marstek energy storage systems via Modbus TCP
Control and monitor Marstek energy storage systems via Modbus TCP

자세히 읽기 ›

지원되는 디바이스

Flow 카드

위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.

언제...

Venus D
켜지면
Venus D
꺼지면
Venus D
전압이 변경되면
Venus D
전류가 변경되면
Venus D
소비 전력이 변경되면
Venus D
온도가 변경되면
Venus D
배터리 충전 상태가 변경되면 ...
Venus D
알람이 켜지면
Venus D
알람이 꺼지면
Venus D
연결이 해제되면
Venus D
연결되면
Venus D
배터리 수준이 변경되면
Venus D
충전전력 제한이 변경되면
Venus D
충전전력 제한 모드가 다음으로 변경되면 ...
i
"Homey"는 Homey가 제품의 충전전력 제한을 제어한다는 의미예요. 다른 모드는 제품에 의해 결정됩니다.
Venus D
Charging status changed
Venus D
Battery started charging
Venus D
Battery started discharging
Venus D
Battery level dropped below threshold
Venus D
Battery level rose above threshold
Venus D
Battery temperature too high
Venus D
Battery temperature too low
Venus D
Battery backup mode changed to Mode
i
Triggered when battery backup mode is enabled or disabled
Venus D
Force charge mode changed to Mode
i
Triggered when force charge mode changes
Venus D
Operation mode changed to Mode
i
Triggered when battery operation mode changes
Venus D
Force charge power changed to Power (W) W
i
Triggered when force charge power setting changes
Venus D
Force discharge power changed to Power (W) W
i
Triggered when force discharge power setting changes
Venus D
Force SOC target changed to SOC Target (%)%
i
Triggered when force SOC target setting changes
Venus D
Battery fault detected
i
Triggered when any battery fault is detected
Venus D
Battery warning detected
i
Triggered when any battery warning is detected
Venus D
Grid fault detected
i
Triggered when grid-related faults are detected
Venus D
Battery system fault detected
i
Triggered when battery system faults are detected
Venus E
켜지면
Venus E
꺼지면
Venus E
전압이 변경되면
Venus E
전류가 변경되면
Venus E
소비 전력이 변경되면
Venus E
알람이 켜지면
Venus E
알람이 꺼지면
Venus E
연결이 해제되면
Venus E
연결되면
Venus E
온도가 변경되면
Venus E
배터리 충전 상태가 변경되면 ...
Venus E
배터리 수준이 변경되면
Venus E
충전전력 제한이 변경되면
Venus E
충전전력 제한 모드가 다음으로 변경되면 ...
i
"Homey"는 Homey가 제품의 충전전력 제한을 제어한다는 의미예요. 다른 모드는 제품에 의해 결정됩니다.
Venus E
Charging status changed
Venus E
Battery started charging
Venus E
Battery started discharging
Venus E
Battery level dropped below threshold
Venus E
Battery level rose above threshold
Venus E
Battery fault detected
i
Triggered when any battery fault is detected
Venus E
Battery warning detected
i
Triggered when any battery warning is detected
Venus E
Grid fault detected
i
Triggered when grid-related faults are detected
Venus E
Battery system fault detected
i
Triggered when battery system faults are detected
Venus E
Hardware fault detected
i
Triggered when hardware faults are detected
Venus E
System fault detected
i
Triggered when system faults are detected
Venus E
Battery temperature too high
Venus E
Battery temperature too low
Venus E
Battery backup mode changed to Mode
i
Triggered when battery backup mode is enabled or disabled
Venus E
Force charge mode changed to Mode
i
Triggered when force charge mode changes
Venus E
Operation mode changed to Mode
i
Triggered when battery operation mode changes
Venus E
Force charge power changed to Power (W) W
i
Triggered when force charge power setting changes
Venus E
Force discharge power changed to Power (W) W
i
Triggered when force discharge power setting changes
Venus E
Force SOC target changed to SOC Target (%)%
i
Triggered when force SOC target setting changes

그리고...

Venus D
켜지면
Venus D
배터리 충전 상태가 다음과 같으면 ...
Venus D
알람이 켜지면
Venus D
연결되면
Venus D
충전전력 제한 모드가 다음이면 ...
i
"Homey"는 Homey가 제품의 충전전력 제한을 제어한다는 의미예요. 다른 모드는 제품에 의해 결정됩니다.
Venus D
Battery backup mode is Mode
i
Check if battery backup mode is enabled or disabled
Venus D
Force charge mode is Mode
i
Check current force charge mode
Venus D
Operation mode is Mode
i
Check current battery operation mode
Venus D
Force charge power is greater than Power (W) W
i
Check if force charge power is above a threshold
Venus D
Force discharge power is greater than Power (W) W
i
Check if force discharge power is above a threshold
Venus D
Force SOC target is greater than SOC Target (%)%
i
Check if force SOC target is above a threshold
Venus D
Battery is charging
Venus D
Battery is discharging
Venus D
Battery level is above Percentage (%)%
Venus D
Battery level is below Percentage (%)%
Venus D
Temperature is above Temperature (°C)°C
Venus D
Max charge power limit is below Power (W) W
i
Check if the device protection system is limiting charge power below a threshold (e.g. due to low temperature)
Venus D
Max discharge power limit is below Power (W) W
i
Check if the device protection system is limiting discharge power below a threshold (e.g. due to low temperature)
Venus D
Charging cutoff SOC is above Percentage (%)%
i
Check if the charging cutoff SOC setting is above a threshold
Venus D
Discharging cutoff SOC (reserve) is above Percentage (%)%
i
Check if the discharging cutoff SOC (reserve) setting is above a threshold
Venus D
Battery has a fault
Venus E
켜지면
Venus E
알람이 켜지면
Venus E
연결되면
Venus E
배터리 충전 상태가 다음과 같으면 ...
Venus E
충전전력 제한 모드가 다음이면 ...
i
"Homey"는 Homey가 제품의 충전전력 제한을 제어한다는 의미예요. 다른 모드는 제품에 의해 결정됩니다.
Venus E
Battery backup mode is Mode
i
Check if battery backup mode is enabled or disabled
Venus E
Force charge mode is Mode
i
Check current force charge mode
Venus E
Operation mode is Mode
i
Check current battery operation mode
Venus E
Force charge power is greater than Power (W) W
i
Check if force charge power is above a threshold
Venus E
Force discharge power is greater than Power (W) W
i
Check if force discharge power is above a threshold
Venus E
Force SOC target is greater than SOC Target (%)%
i
Check if force SOC target is above a threshold
Venus E
Battery is charging
Venus E
Battery is discharging
Venus E
Battery level is above Percentage (%)%
Venus E
Battery level is below Percentage (%)%
Venus E
Battery has a fault
Venus E
Temperature is above Temperature (°C)°C
Venus E
Max charge power limit is below Power (W) W
i
Check if the device protection system is limiting charge power below a threshold (e.g. due to low temperature)
Venus E
Max discharge power limit is below Power (W) W
i
Check if the device protection system is limiting discharge power below a threshold (e.g. due to low temperature)
Venus E
Charging cutoff SOC is above Percentage (%)%
i
Check if the charging cutoff SOC setting is above a threshold
Venus E
Discharging cutoff SOC (reserve) is above Percentage (%)%
i
Check if the discharging cutoff SOC (reserve) setting is above a threshold

그러면...

Venus D
켜기
Venus D
끄기
Venus D
켬/끔 상태 전환하기
Venus D
충전전력 제한 설정 W
i
이렇게 하면 충전전력 제한 모드도 Homey로 전환돼요. 전기차 충전기의 충전이 상황에 맞게 자동으로 시작되거나 중지되죠.
Venus D
충전전력 제한 모드를 다음으로 설정 ...
i
이 제품의 충전전력 제한을 Homey를 통해 제어하려면 "Homey"를 선택하세요. 다른 모드는 제품에 의해 결정됩니다.
Venus D
Set battery backup mode to Mode
i
Enable or disable battery backup mode
Venus D
Set force SOC target to SOC Target (%)%
i
Set target SOC setting for force (dis)charge
Venus D
Set charging cutoff SOC to Percentage (%)%
i
Set the SOC level at which charging stops (40-100%)
Venus D
Set discharging cutoff SOC to Percentage (%)%
i
Set the SOC reserve level below which discharging stops (12-30%). WARNING: Setting this below 15% is not recommended as it may reduce battery lifespan.
Venus E
켜기
Venus E
끄기
Venus E
켬/끔 상태 전환하기
Venus E
충전전력 제한 설정 W
i
이렇게 하면 충전전력 제한 모드도 Homey로 전환돼요. 전기차 충전기의 충전이 상황에 맞게 자동으로 시작되거나 중지되죠.
Venus E
충전전력 제한 모드를 다음으로 설정 ...
i
이 제품의 충전전력 제한을 Homey를 통해 제어하려면 "Homey"를 선택하세요. 다른 모드는 제품에 의해 결정됩니다.
Venus E
Set battery backup mode to Mode
i
Enable or disable battery backup mode
Venus E
Set force SOC target to SOC Target (%)%
i
Set target SOC setting for force (dis)charge
Venus E
Set charging cutoff SOC to Percentage (%)%
i
Set the SOC level at which charging stops (40-100%)
Venus E
Set discharging cutoff SOC to Percentage (%)%
i
Set the SOC reserve level below which discharging stops (12-30%). WARNING: Setting this below 15% is not recommended as it may reduce battery lifespan.

지원

이 앱에 문제가 있습니까? 개발자에게 문의하려면 여기를 클릭하세요..

새로운 기능

버전 1.5.8 — Polling resilience and reachability signalling. (1) Per-register error isolation in the poll cycle for both Venus E and Venus D - previously one Modbus timeout on any register (e.g. AC current at 32201) aborted every read after it in the same batch, leaving voltage fresh while power, SOC, battery-power and everything else silently went stale for the whole cycle. Reported by a 3x Venus V3 tester on v1.5.7 - matched the pattern exactly. Now each register-read is guarded so a single timeout skips only that capability's update; every downstream read still runs. Cross-cutting derivations (target_power range, onoff, target_power_mode) fall back to the previous capability value or skip entirely when their upstream mode reads failed, instead of writing garbage. (2) alarm_connectivity capability added to both drivers - installed for existing devices automatically. The pollcycle now toggles this standard Homey boolean instead of calling setUnavailable, so a Modbus outage no longer trips flow errors on every automation referencing the device; instead automations can branch on the 'is disconnected' condition to skip acting on stale data. setUnavailable still triggers on genuinely-permanent issues (wrong-driver detection, static-info retrieval failure at init). (3) Venus E 'Battery is charging' / 'Battery is discharging' condition cards fixed - they read a phantom capability name ('charging_status') that was never written, so the cards always returned false regardless of actual state. Now read the correct 'battery_charging_state' capability that the poll cycle actually writes to. Venus D was not affected.

업데이트 로그 보기

Marstek Energy Storage

선택하신 Homey에 Marstek Energy Storage이(가) 호환되지 않습니다.

Marstek Energy Storage이(가) 곧 Homey에 설치됩니다.
앱 설치