1CH Relay Module
켜지면
HomeSuite
Personal suite for Zigbee devices like Zemismart & NovaDigital switches, sirens, sensors and more
경고! 이 앱이 제대로 작동하지 않을 수 있습니다.
이 앱 버전은 현재 테스트 중이며 아직 검토되지 않았습니다. 기대한 대로 작동하지 않을 수 있습니다.
이 앱을 설치할 때는 각별히 주의하세요.
HomeSuite adds support for a curated set of Zigbee devices to your Homey, with a focus on reliable behavior and correct reporting.
Supported wall switches (NovaDigital & Zemismart, 1 to 6 gang) restore both their state and configuration after a power outage. The backlight can be set to remain off even when power is restored. Multi-gang models correctly report the status of each individual outlet. Devices that stop responding are shown as unavailable in Homey — even before they fully leave the Zigbee network.
Smart plugs use availability detection to avoid unnecessary polling after being unplugged. Temperature, humidity, and motion sensors report battery levels accurately. The siren also reports battery. Temperature sensors display the same value on screen as exported to Homey flows.
The Sonoff ZBMiniR2 and BASICZBR3 relays are included as switches (not lights), avoiding false lamp usage counters. The ZBMiniR2 also supports turbo mode. Two Sonoff temperature and humidity sensors (SNZB-02, SNZB-03) are bundled in the same app to keep things simple.
Flow triggers — power restore:
All mains-powered devices (switches, relays, plugs) fire a "Reconnected after power cut" flow trigger the moment they rejoin the Zigbee network. This works even for short outages that wouldn't normally trip the unavailability alarm. Use it to automate scenes like "breaker came back → turn on the lights". Detection is based on low-level firmware signals that fire only on power restore — not on periodic traffic — ensuring no false triggers. A 120-second startup delay and a 30-second cooldown provide additional protection against triggers on app restart.
The ZBMiniR2 also has its own dedicated flow card ("Reconnected after power cut") that appears directly in the device's flow list, making it easy to target a specific relay without extra filters.
Supported devices:
- NovaDigital & Zemismart wall switches — 1, 2, 3, 4 and 6 gang
- Sonoff ZBMiniR2 and BASICZBR3 relays
- Sonoff SNZB-02 temperature/humidity sensor
- Sonoff SNZB-03 motion sensor
- Smart plugs and power strips
- Temperature & humidity clock
- Gas detector and siren
- Zigbee repeater
- Sonoff Zigbee USB Dongle (repeater)
지원되는 디바이스
Flow 카드
위의 디바이스를 클릭하면 관련 Flow 카드만 표시됩니다.
언제...
1CH Relay Module
꺼지면
1CH Relay Module
Became available
Fires when this device becomes available.
1CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
1CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
2 Gang Wireless Remote
배터리 수준이 변경되면
2 Gang Wireless Remote
Action Button action
2CH Relay Module
켜지면
2CH Relay Module
꺼지면
2CH Relay Module
Became available
Fires when this device becomes available.
2CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
2CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
3CH Relay Module
켜지면
3CH Relay Module
꺼지면
3CH Relay Module
Became available
Fires when this device becomes available.
3CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
3CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Aqara FP1 Presence Sensor
점유가 감지되면
Aqara FP1 Presence Sensor
점유가 감지되지 않으면
Aqara FP1 Presence Sensor
온도가 변경되면
Aqara FP1 Presence Sensor
[[device]] presence event
Fires when the FP1 reports a presence event such as enter, leave or approach.
Door & Window Sensor
열림 감지 열리면
Door & Window Sensor
열림 감지 닫히면
Door & Window Sensor
배터리 수준이 변경되면
Door & Window Sensor
배터리 알람이 '예'이면
Door & Window Sensor
배터리 알람이 '아니요'이면
Door & Window Sensor
Became available
Fires when this device becomes available.
Door & Window Sensor
Became unavailable
Fires when this device becomes unavailable.
Door & Window Sensor 2
열림 감지 열리면
Door & Window Sensor 2
열림 감지 닫히면
Door & Window Sensor 2
배터리 수준이 변경되면
Door & Window Sensor 2
배터리 알람이 '예'이면
Door & Window Sensor 2
배터리 알람이 '아니요'이면
Door & Window Sensor 2
Became available
Fires when this device becomes available.
Door & Window Sensor 2
Became unavailable
Fires when this device becomes unavailable.
Ekaza Smart Siren
켜지면
Ekaza Smart Siren
꺼지면
Ekaza Smart Siren
배터리 수준이 변경되면
Ekaza Smart Siren
Became available
Fires when this device becomes available.
Ekaza Smart Siren
Became unavailable
Fires when this device becomes unavailable.
Ekaza Smart Siren
[[device]] siren was activated
Triggered when the siren starts playing.
Ekaza Smart Siren
[[device]] siren was deactivated
Triggered when the siren stops playing (automatic or manual).
LCD Temperature & Humidity Sensor
온도가 변경되면
LCD Temperature & Humidity Sensor
습도가 변경되면
LCD Temperature & Humidity Sensor
배터리 수준이 변경되면
LCD Temperature & Humidity Sensor
Became available
Fires when this device becomes available.
LCD Temperature & Humidity Sensor
Became unavailable
Fires when this device becomes unavailable.
MINI-ZBD Dry Contact
켜지면
MINI-ZBD Dry Contact
꺼지면
MINI-ZBD Dry Contact
Became available
Fires when this device becomes available.
MINI-ZBD Dry Contact
Became unavailable
Fires when this device becomes unavailable.
MINI-ZBD Dry Contact
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
MINI-ZBD Dry Contact
Single click
This trigger fires when the physical switch is pressed and the 'Detach Relay' setting is enabled.
Moes 4 Gang Wall Remote
배터리 수준이 변경되면
Moes 4 Gang Wall Remote
Action Button action
Moes Dimmer 3 Gang
켜지면
Moes Dimmer 3 Gang
꺼지면
Moes Dimmer 3 Gang
밝기가 변경되면
Moes Dimmer 3 Gang
Became available
Fires when this device becomes available.
Moes Dimmer 3 Gang
Became unavailable
Fires when this device becomes unavailable.
Moes Dimmer 3 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Motion Sensor SNZB-03
움직임이 감지되면
Motion Sensor SNZB-03
움직임이 없으면
Motion Sensor SNZB-03
배터리 수준이 변경되면
NovaDigital Switch 1 Gang
켜지면
NovaDigital Switch 1 Gang
꺼지면
NovaDigital Switch 1 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 1 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 1 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 2 Gang
켜지면
NovaDigital Switch 2 Gang
꺼지면
NovaDigital Switch 2 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 2 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 2 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 2 Gang Touch
켜지면
NovaDigital Switch 2 Gang Touch
꺼지면
NovaDigital Switch 2 Gang Touch
Became available
Fires when this device becomes available.
NovaDigital Switch 2 Gang Touch
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 2 Gang Touch
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 3 Gang
켜지면
NovaDigital Switch 3 Gang
꺼지면
NovaDigital Switch 3 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 3 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 3 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 4 Gang
켜지면
NovaDigital Switch 4 Gang
꺼지면
NovaDigital Switch 4 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 4 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 4 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 4 Gang ZCL
켜지면
NovaDigital Switch 4 Gang ZCL
꺼지면
NovaDigital Switch 4 Gang ZCL
Became available
Fires when this device becomes available.
NovaDigital Switch 4 Gang ZCL
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 4 Gang ZCL
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Wall Switch 6 Gang
켜지면
NovaDigital Wall Switch 6 Gang
꺼지면
NovaDigital Wall Switch 6 Gang
Became available
Fires when this device becomes available.
NovaDigital Wall Switch 6 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Wall Switch 6 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Power Strip 4 Sockets + USB
켜지면
Power Strip 4 Sockets + USB
꺼지면
Power Strip 4 Sockets + USB
Became available
Fires when this device becomes available.
Power Strip 4 Sockets + USB
Became unavailable
Fires when this device becomes unavailable.
Power Strip 4 Sockets + USB
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Radar Sensor Moes (Linptech)
점유가 감지되면
Radar Sensor Moes (Linptech)
점유가 감지되지 않으면
Radar Sensor Moes (Linptech)
조도가 변경되면
Radar Sensor Moes (Linptech)
거리가 변경되면
Smart Gas Detector
가스가 감지되면
Smart Gas Detector
가스 감지가 정상 상태이면
Smart Gas Detector
이상이 감지되면
Smart Gas Detector
이상 감지가 정상 상태이면
Smart Gas Detector
Became available
Fires when this device becomes available.
Smart Gas Detector
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3000)
켜지면
Smart Plug (_TZ3000)
꺼지면
Smart Plug (_TZ3000)
소비 전력이 변경되면
Smart Plug (_TZ3000)
전력량이 변경되면
Smart Plug (_TZ3000)
전류가 변경되면
Smart Plug (_TZ3000)
전압이 변경되면
Smart Plug (_TZ3000)
Became available
Fires when this device becomes available.
Smart Plug (_TZ3000)
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3000)
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Smart Plug (_TZ3210)
켜지면
Smart Plug (_TZ3210)
꺼지면
Smart Plug (_TZ3210)
소비 전력이 변경되면
Smart Plug (_TZ3210)
전력량이 변경되면
Smart Plug (_TZ3210)
전류가 변경되면
Smart Plug (_TZ3210)
전압이 변경되면
Smart Plug (_TZ3210)
Became available
Fires when this device becomes available.
Smart Plug (_TZ3210)
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3210)
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Smart Plug with metering
켜지면
Smart Plug with metering
꺼지면
Smart Plug with metering
소비 전력이 변경되면
Smart Plug with metering
전력량이 변경되면
Smart Plug with metering
전류가 변경되면
Smart Plug with metering
전압이 변경되면
Smart Plug with metering
Became available
Fires when this device becomes available.
Smart Plug with metering
Became unavailable
Fires when this device becomes unavailable.
Smart Plug with metering
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Sonoff Energy Meter
소비 전력이 변경되면
Sonoff Energy Meter
전력량이 변경되면
Sonoff Energy Meter
전류가 변경되면
Sonoff Energy Meter
전압이 변경되면
Sonoff Zigbee Dongle
Became available
Fires when this device becomes available.
Sonoff Zigbee Dongle
Became unavailable
Fires when this device becomes unavailable.
Switch (Basic ZBR3)
켜지면
Switch (Basic ZBR3)
꺼지면
Switch (Basic ZBR3)
Became available
Fires when this device becomes available.
Switch (Basic ZBR3)
Became unavailable
Fires when this device becomes unavailable.
Thermometer SNZB-02LD
온도가 변경되면
Thermometer SNZB-02LD
배터리 수준이 변경되면
Thermometer SNZB-02WD
온도가 변경되면
Thermometer SNZB-02WD
습도가 변경되면
Thermometer SNZB-02WD
배터리 수준이 변경되면
Tuya Temperature & Humidity Sensor with Clock
온도가 변경되면
Tuya Temperature & Humidity Sensor with Clock
습도가 변경되면
Tuya Temperature & Humidity Sensor with Clock
배터리 수준이 변경되면
Tuya Temperature & Humidity Sensor with Clock
Became available
Fires when this device becomes available.
Tuya Temperature & Humidity Sensor with Clock
Became unavailable
Fires when this device becomes unavailable.
ZBMINI-R2 Switch
켜지면
ZBMINI-R2 Switch
꺼지면
ZBMINI-R2 Switch
Became available
Fires when this device becomes available.
ZBMINI-R2 Switch
Became unavailable
Fires when this device becomes unavailable.
ZBMINI-R2 Switch
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
ZBMINI-R2 Switch
Single click
This trigger fires when the physical switch is pressed and the 'Detach Relay' setting is enabled.
Zigbee Repeater
Became available
Fires when this device becomes available.
Zigbee Repeater
Became unavailable
Fires when this device becomes unavailable.
존재 센서 SNZB-06P
움직임이 감지되면
존재 센서 SNZB-06P
움직임이 없으면
그리고...
1CH Relay Module
켜지면
2CH Relay Module
켜지면
3CH Relay Module
켜지면
Aqara FP1 Presence Sensor
점유가 감지되면
Door & Window Sensor
열림 감지 열리면
Door & Window Sensor
배터리 알람이 '예'이면
Door & Window Sensor 2
열림 감지 열리면
Door & Window Sensor 2
배터리 알람이 '예'이면
Ekaza Smart Siren
켜지면
Ekaza Smart Siren
[[device]] siren is playing
Check if the siren is currently active.
HomeSuite
... is available
True when the device is currently online
MINI-ZBD Dry Contact
켜지면
Moes Dimmer 3 Gang
켜지면
Motion Sensor SNZB-03
움직임이 감지되면
NovaDigital Switch 1 Gang
켜지면
NovaDigital Switch 1 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 2 Gang
켜지면
NovaDigital Switch 2 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 2 Gang Touch
켜지면
NovaDigital Switch 2 Gang Touch
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 3 Gang
켜지면
NovaDigital Switch 3 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 4 Gang
켜지면
NovaDigital Switch 4 Gang ZCL
켜지면
NovaDigital Switch 4 Gang ZCL
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Wall Switch 6 Gang
켜지면
Power Strip 4 Sockets + USB
켜지면
Radar Sensor Moes (Linptech)
점유가 감지되면
Smart Gas Detector
가스가 감지되면
Smart Gas Detector
이상이 감지되면
Smart Plug (_TZ3000)
켜지면
Smart Plug (_TZ3210)
켜지면
Smart Plug with metering
켜지면
Switch (Basic ZBR3)
켜지면
ZBMINI-R2 Switch
켜지면
존재 센서 SNZB-06P
움직임이 감지되면
그러면...
1CH Relay Module
켜기
1CH Relay Module
끄기
1CH Relay Module
켬/끔 상태 전환하기
2CH Relay Module
켜기
2CH Relay Module
끄기
2CH Relay Module
켬/끔 상태 전환하기
3CH Relay Module
켜기
3CH Relay Module
끄기
3CH Relay Module
켬/끔 상태 전환하기
Aqara FP1 Presence Sensor
Reset presence
Send the FP1 reset presence command.
Ekaza Smart Siren
켜기
Ekaza Smart Siren
끄기
Ekaza Smart Siren
켬/끔 상태 전환하기
Ekaza Smart Siren
Play ... for 10 seconds
Play a specific melody for the given duration (volume is taken from Settings).
Ekaza Smart Siren
Stop the siren
Immediately stop the siren if it is playing.
MINI-ZBD Dry Contact
켜기
MINI-ZBD Dry Contact
끄기
MINI-ZBD Dry Contact
켬/끔 상태 전환하기
Moes Dimmer 3 Gang
켜기
Moes Dimmer 3 Gang
끄기
Moes Dimmer 3 Gang
켬/끔 상태 전환하기
Moes Dimmer 3 Gang
다음 밝기로 조절 %
Moes Dimmer 3 Gang
상대 밝기 설정 %
제품의 현재 디밍 수준에 따라 어둡게 또는 밝게 설정돼요.
NovaDigital Switch 1 Gang
켜기
NovaDigital Switch 1 Gang
끄기
NovaDigital Switch 1 Gang
켬/끔 상태 전환하기
NovaDigital Switch 1 Gang
Turn backlight ...
NovaDigital Switch 2 Gang
켜기
NovaDigital Switch 2 Gang
끄기
NovaDigital Switch 2 Gang
켬/끔 상태 전환하기
NovaDigital Switch 2 Gang
Turn backlight ...
NovaDigital Switch 2 Gang Touch
켜기
NovaDigital Switch 2 Gang Touch
끄기
NovaDigital Switch 2 Gang Touch
켬/끔 상태 전환하기
NovaDigital Switch 2 Gang Touch
Turn backlight ...
NovaDigital Switch 3 Gang
켜기
NovaDigital Switch 3 Gang
끄기
NovaDigital Switch 3 Gang
켬/끔 상태 전환하기
NovaDigital Switch 3 Gang
Turn backlight ...
NovaDigital Switch 4 Gang
켜기
NovaDigital Switch 4 Gang
끄기
NovaDigital Switch 4 Gang
켬/끔 상태 전환하기
NovaDigital Switch 4 Gang ZCL
켜기
NovaDigital Switch 4 Gang ZCL
끄기
NovaDigital Switch 4 Gang ZCL
켬/끔 상태 전환하기
NovaDigital Switch 4 Gang ZCL
Turn backlight ...
NovaDigital Wall Switch 6 Gang
켜기
NovaDigital Wall Switch 6 Gang
끄기
NovaDigital Wall Switch 6 Gang
켬/끔 상태 전환하기
Power Strip 4 Sockets + USB
켜기
Power Strip 4 Sockets + USB
끄기
Power Strip 4 Sockets + USB
켬/끔 상태 전환하기
Smart Plug (_TZ3000)
켜기
Smart Plug (_TZ3000)
끄기
Smart Plug (_TZ3000)
켬/끔 상태 전환하기
Smart Plug (_TZ3210)
켜기
Smart Plug (_TZ3210)
끄기
Smart Plug (_TZ3210)
켬/끔 상태 전환하기
Smart Plug with metering
켜기
Smart Plug with metering
끄기
Smart Plug with metering
켬/끔 상태 전환하기
Sonoff Energy Meter
Reset accumulated consumption
Sends the energy meter reset command, identified via sniffer analysis and confirmed working on real hardware.
Switch (Basic ZBR3)
켜기
Switch (Basic ZBR3)
끄기
Switch (Basic ZBR3)
켬/끔 상태 전환하기
ZBMINI-R2 Switch
켜기
ZBMINI-R2 Switch
끄기
ZBMINI-R2 Switch
켬/끔 상태 전환하기
지원
이 앱에 문제가 있습니까? 개발자 연락 방법 이메일 보내기.
새로운 기능
버전 1.0.24 — Fix Time cluster binding gaps causing binding_unavailable errors on several drivers; fix IAS zone status bit decoding for gas detector and door/window sensor; improve availability detection for select Sonoff switches
업데이트 로그
Gabriel Pedrosa Machado 님에게 고맙다는 인사를 전해드리겠습니다!
Gabriel Pedrosa Machado 님께 앱을 잘 사용하고 있다고 알려주세요.
제안이 전송되었습니다.
제안을 보내주셨다고 Gabriel Pedrosa Machado 님에게 알리겠습니다.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
