1CH Relay Module
Turned on
HomeSuite
Personal suite for Zigbee devices like Zemismart & NovaDigital switches, sirens, sensors and more
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
HomeSuite adds support for a curated set of Zigbee devices to your Homey, with a focus on reliable behavior and correct reporting.
Supported wall switches (NovaDigital & Zemismart, 1 to 6 gang) restore both their state and configuration after a power outage. The backlight can be set to remain off even when power is restored. Multi-gang models correctly report the status of each individual outlet. Devices that stop responding are shown as unavailable in Homey — even before they fully leave the Zigbee network.
Smart plugs use availability detection to avoid unnecessary polling after being unplugged. Temperature, humidity, and motion sensors report battery levels accurately. The siren also reports battery. Temperature sensors display the same value on screen as exported to Homey flows.
The Sonoff ZBMiniR2 and BASICZBR3 relays are included as switches (not lights), avoiding false lamp usage counters. The ZBMiniR2 also supports turbo mode. Two Sonoff temperature and humidity sensors (SNZB-02, SNZB-03) are bundled in the same app to keep things simple.
Flow triggers — power restore:
All mains-powered devices (switches, relays, plugs) fire a "Reconnected after power cut" flow trigger the moment they rejoin the Zigbee network. This works even for short outages that wouldn't normally trip the unavailability alarm. Use it to automate scenes like "breaker came back → turn on the lights". Detection is based on low-level firmware signals that fire only on power restore — not on periodic traffic — ensuring no false triggers. A 120-second startup delay and a 30-second cooldown provide additional protection against triggers on app restart.
The ZBMiniR2 also has its own dedicated flow card ("Reconnected after power cut") that appears directly in the device's flow list, making it easy to target a specific relay without extra filters.
Supported devices:
- NovaDigital & Zemismart wall switches — 1, 2, 3, 4 and 6 gang
- Sonoff ZBMiniR2 and BASICZBR3 relays
- Sonoff SNZB-02 temperature/humidity sensor
- Sonoff SNZB-03 motion sensor
- Smart plugs and power strips
- Temperature & humidity clock
- Gas detector and siren
- Zigbee repeater
- Sonoff Zigbee USB Dongle (repeater)
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
1CH Relay Module
Turned off
1CH Relay Module
Became available
Fires when this device becomes available.
1CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
1CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
2 Gang Wireless Remote
The battery level changed
2 Gang Wireless Remote
Action Button action
2CH Relay Module
Turned on
2CH Relay Module
Turned off
2CH Relay Module
Became available
Fires when this device becomes available.
2CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
2CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
3CH Relay Module
Turned on
3CH Relay Module
Turned off
3CH Relay Module
Became available
Fires when this device becomes available.
3CH Relay Module
Became unavailable
Fires when this device becomes unavailable.
3CH Relay Module
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Aqara FP1 Presence Sensor
The occupancy alarm turned on
Aqara FP1 Presence Sensor
The occupancy alarm turned off
Aqara FP1 Presence Sensor
The temperature changes
Aqara FP1 Presence Sensor
[[device]] presence event
Fires when the FP1 reports a presence event such as enter, leave or approach.
Door & Window Sensor
The contact alarm turned on
Door & Window Sensor
The contact alarm turned off
Door & Window Sensor
The battery level changed
Door & Window Sensor
The battery alarm turned on
Door & Window Sensor
The battery alarm turned off
Door & Window Sensor
Became available
Fires when this device becomes available.
Door & Window Sensor
Became unavailable
Fires when this device becomes unavailable.
Door & Window Sensor 2
The contact alarm turned on
Door & Window Sensor 2
The contact alarm turned off
Door & Window Sensor 2
The battery level changed
Door & Window Sensor 2
The battery alarm turned on
Door & Window Sensor 2
The battery alarm turned off
Door & Window Sensor 2
Became available
Fires when this device becomes available.
Door & Window Sensor 2
Became unavailable
Fires when this device becomes unavailable.
Ekaza Smart Siren
Turned on
Ekaza Smart Siren
Turned off
Ekaza Smart Siren
The battery level changed
Ekaza Smart Siren
Became available
Fires when this device becomes available.
Ekaza Smart Siren
Became unavailable
Fires when this device becomes unavailable.
Ekaza Smart Siren
[[device]] siren was activated
Triggered when the siren starts playing.
Ekaza Smart Siren
[[device]] siren was deactivated
Triggered when the siren stops playing (automatic or manual).
LCD Temperature & Humidity Sensor
The temperature changes
LCD Temperature & Humidity Sensor
The humidity changed
LCD Temperature & Humidity Sensor
The battery level changed
LCD Temperature & Humidity Sensor
Became available
Fires when this device becomes available.
LCD Temperature & Humidity Sensor
Became unavailable
Fires when this device becomes unavailable.
MINI-ZBD Dry Contact
Turned on
MINI-ZBD Dry Contact
Turned off
MINI-ZBD Dry Contact
Became available
Fires when this device becomes available.
MINI-ZBD Dry Contact
Became unavailable
Fires when this device becomes unavailable.
MINI-ZBD Dry Contact
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
MINI-ZBD Dry Contact
Single click
This trigger fires when the physical switch is pressed and the 'Detach Relay' setting is enabled.
Moes 4 Gang Wall Remote
The battery level changed
Moes 4 Gang Wall Remote
Action Button action
Moes Dimmer 3 Gang
Turned on
Moes Dimmer 3 Gang
Turned off
Moes Dimmer 3 Gang
The dim level changed
Moes Dimmer 3 Gang
Became available
Fires when this device becomes available.
Moes Dimmer 3 Gang
Became unavailable
Fires when this device becomes unavailable.
Moes Dimmer 3 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Motion Sensor SNZB-03
The motion alarm turned on
Motion Sensor SNZB-03
The motion alarm turned off
Motion Sensor SNZB-03
The battery level changed
NovaDigital Switch 1 Gang
Turned on
NovaDigital Switch 1 Gang
Turned off
NovaDigital Switch 1 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 1 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 1 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 2 Gang
Turned on
NovaDigital Switch 2 Gang
Turned off
NovaDigital Switch 2 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 2 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 2 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 2 Gang Touch
Turned on
NovaDigital Switch 2 Gang Touch
Turned off
NovaDigital Switch 2 Gang Touch
Became available
Fires when this device becomes available.
NovaDigital Switch 2 Gang Touch
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 2 Gang Touch
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 3 Gang
Turned on
NovaDigital Switch 3 Gang
Turned off
NovaDigital Switch 3 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 3 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 3 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 4 Gang
Turned on
NovaDigital Switch 4 Gang
Turned off
NovaDigital Switch 4 Gang
Became available
Fires when this device becomes available.
NovaDigital Switch 4 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 4 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Switch 4 Gang ZCL
Turned on
NovaDigital Switch 4 Gang ZCL
Turned off
NovaDigital Switch 4 Gang ZCL
Became available
Fires when this device becomes available.
NovaDigital Switch 4 Gang ZCL
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Switch 4 Gang ZCL
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
NovaDigital Wall Switch 6 Gang
Turned on
NovaDigital Wall Switch 6 Gang
Turned off
NovaDigital Wall Switch 6 Gang
Became available
Fires when this device becomes available.
NovaDigital Wall Switch 6 Gang
Became unavailable
Fires when this device becomes unavailable.
NovaDigital Wall Switch 6 Gang
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Power Strip 4 Sockets + USB
Turned on
Power Strip 4 Sockets + USB
Turned off
Power Strip 4 Sockets + USB
Became available
Fires when this device becomes available.
Power Strip 4 Sockets + USB
Became unavailable
Fires when this device becomes unavailable.
Power Strip 4 Sockets + USB
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Presence Sensor SNZB-06P
The motion alarm turned on
Presence Sensor SNZB-06P
The motion alarm turned off
Radar Sensor Moes (Linptech)
The occupancy alarm turned on
Radar Sensor Moes (Linptech)
The occupancy alarm turned off
Radar Sensor Moes (Linptech)
The luminance changed
Radar Sensor Moes (Linptech)
The distance changed
Smart Gas Detector
The gas alarm turned on
Smart Gas Detector
The gas alarm turned off
Smart Gas Detector
A problem is detected
Smart Gas Detector
The problem is solved
Smart Gas Detector
Became available
Fires when this device becomes available.
Smart Gas Detector
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3000)
Turned on
Smart Plug (_TZ3000)
Turned off
Smart Plug (_TZ3000)
The power changed
Smart Plug (_TZ3000)
The power meter changed
Smart Plug (_TZ3000)
The electric current changed
Smart Plug (_TZ3000)
The voltage changed
Smart Plug (_TZ3000)
Became available
Fires when this device becomes available.
Smart Plug (_TZ3000)
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3000)
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Smart Plug (_TZ3210)
Turned on
Smart Plug (_TZ3210)
Turned off
Smart Plug (_TZ3210)
The power changed
Smart Plug (_TZ3210)
The power meter changed
Smart Plug (_TZ3210)
The electric current changed
Smart Plug (_TZ3210)
The voltage changed
Smart Plug (_TZ3210)
Became available
Fires when this device becomes available.
Smart Plug (_TZ3210)
Became unavailable
Fires when this device becomes unavailable.
Smart Plug (_TZ3210)
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Smart Plug with metering
Turned on
Smart Plug with metering
Turned off
Smart Plug with metering
The power changed
Smart Plug with metering
The power meter changed
Smart Plug with metering
The electric current changed
Smart Plug with metering
The voltage changed
Smart Plug with metering
Became available
Fires when this device becomes available.
Smart Plug with metering
Became unavailable
Fires when this device becomes unavailable.
Smart Plug with metering
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
Sonoff Energy Meter
The power changed
Sonoff Energy Meter
The power meter changed
Sonoff Energy Meter
The electric current changed
Sonoff Energy Meter
The voltage changed
Sonoff Zigbee Dongle
Became available
Fires when this device becomes available.
Sonoff Zigbee Dongle
Became unavailable
Fires when this device becomes unavailable.
Switch (Basic ZBR3)
Turned on
Switch (Basic ZBR3)
Turned off
Switch (Basic ZBR3)
Became available
Fires when this device becomes available.
Switch (Basic ZBR3)
Became unavailable
Fires when this device becomes unavailable.
Thermometer SNZB-02LD
The temperature changes
Thermometer SNZB-02LD
The battery level changed
Thermometer SNZB-02WD
The temperature changes
Thermometer SNZB-02WD
The humidity changed
Thermometer SNZB-02WD
The battery level changed
Tuya Temperature & Humidity Sensor with Clock
The temperature changes
Tuya Temperature & Humidity Sensor with Clock
The humidity changed
Tuya Temperature & Humidity Sensor with Clock
The battery level changed
Tuya Temperature & Humidity Sensor with Clock
Became available
Fires when this device becomes available.
Tuya Temperature & Humidity Sensor with Clock
Became unavailable
Fires when this device becomes unavailable.
ZBMINI-R2 Switch
Turned on
ZBMINI-R2 Switch
Turned off
ZBMINI-R2 Switch
Became available
Fires when this device becomes available.
ZBMINI-R2 Switch
Became unavailable
Fires when this device becomes unavailable.
ZBMINI-R2 Switch
Reconnected after power cut
Fires when this device reconnects to the Zigbee network after a power cut.
ZBMINI-R2 Switch
Single click
This trigger fires when the physical switch is pressed and the 'Detach Relay' setting is enabled.
Zigbee Repeater
Became available
Fires when this device becomes available.
Zigbee Repeater
Became unavailable
Fires when this device becomes unavailable.
And...
1CH Relay Module
Is turned on
2CH Relay Module
Is turned on
3CH Relay Module
Is turned on
Aqara FP1 Presence Sensor
Is occupied
Door & Window Sensor
The contact alarm is on
Door & Window Sensor
The battery alarm is on
Door & Window Sensor 2
The contact alarm is on
Door & Window Sensor 2
The battery alarm is on
Ekaza Smart Siren
Is turned on
Ekaza Smart Siren
[[device]] siren is playing
Check if the siren is currently active.
HomeSuite
... is available
True when the device is currently online
MINI-ZBD Dry Contact
Is turned on
Moes Dimmer 3 Gang
Is turned on
Motion Sensor SNZB-03
The motion alarm is on
NovaDigital Switch 1 Gang
Is turned on
NovaDigital Switch 1 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 2 Gang
Is turned on
NovaDigital Switch 2 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 2 Gang Touch
Is turned on
NovaDigital Switch 2 Gang Touch
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 3 Gang
Is turned on
NovaDigital Switch 3 Gang
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Switch 4 Gang
Is turned on
NovaDigital Switch 4 Gang ZCL
Is turned on
NovaDigital Switch 4 Gang ZCL
Backlight is on
True when the device's physical backlight is currently on
NovaDigital Wall Switch 6 Gang
Is turned on
Power Strip 4 Sockets + USB
Is turned on
Presence Sensor SNZB-06P
The motion alarm is on
Radar Sensor Moes (Linptech)
Is occupied
Smart Gas Detector
The gas alarm is on
Smart Gas Detector
There is a problem
Smart Plug (_TZ3000)
Is turned on
Smart Plug (_TZ3210)
Is turned on
Smart Plug with metering
Is turned on
Switch (Basic ZBR3)
Is turned on
ZBMINI-R2 Switch
Is turned on
Then...
1CH Relay Module
Turn on
1CH Relay Module
Turn off
1CH Relay Module
Toggle on or off
2CH Relay Module
Turn on
2CH Relay Module
Turn off
2CH Relay Module
Toggle on or off
3CH Relay Module
Turn on
3CH Relay Module
Turn off
3CH Relay Module
Toggle on or off
Aqara FP1 Presence Sensor
Reset presence
Send the FP1 reset presence command.
Ekaza Smart Siren
Turn on
Ekaza Smart Siren
Turn off
Ekaza Smart Siren
Toggle on or off
Ekaza Smart Siren
Play ... for 10 seconds
Play a specific melody for the given duration (volume is taken from Settings).
Ekaza Smart Siren
Stop the siren
Immediately stop the siren if it is playing.
MINI-ZBD Dry Contact
Turn on
MINI-ZBD Dry Contact
Turn off
MINI-ZBD Dry Contact
Toggle on or off
Moes Dimmer 3 Gang
Turn on
Moes Dimmer 3 Gang
Turn off
Moes Dimmer 3 Gang
Toggle on or off
Moes Dimmer 3 Gang
Dim to %
Moes Dimmer 3 Gang
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
NovaDigital Switch 1 Gang
Turn on
NovaDigital Switch 1 Gang
Turn off
NovaDigital Switch 1 Gang
Toggle on or off
NovaDigital Switch 1 Gang
Turn backlight ...
NovaDigital Switch 2 Gang
Turn on
NovaDigital Switch 2 Gang
Turn off
NovaDigital Switch 2 Gang
Toggle on or off
NovaDigital Switch 2 Gang
Turn backlight ...
NovaDigital Switch 2 Gang Touch
Turn on
NovaDigital Switch 2 Gang Touch
Turn off
NovaDigital Switch 2 Gang Touch
Toggle on or off
NovaDigital Switch 2 Gang Touch
Turn backlight ...
NovaDigital Switch 3 Gang
Turn on
NovaDigital Switch 3 Gang
Turn off
NovaDigital Switch 3 Gang
Toggle on or off
NovaDigital Switch 3 Gang
Turn backlight ...
NovaDigital Switch 4 Gang
Turn on
NovaDigital Switch 4 Gang
Turn off
NovaDigital Switch 4 Gang
Toggle on or off
NovaDigital Switch 4 Gang ZCL
Turn on
NovaDigital Switch 4 Gang ZCL
Turn off
NovaDigital Switch 4 Gang ZCL
Toggle on or off
NovaDigital Switch 4 Gang ZCL
Turn backlight ...
NovaDigital Wall Switch 6 Gang
Turn on
NovaDigital Wall Switch 6 Gang
Turn off
NovaDigital Wall Switch 6 Gang
Toggle on or off
Power Strip 4 Sockets + USB
Turn on
Power Strip 4 Sockets + USB
Turn off
Power Strip 4 Sockets + USB
Toggle on or off
Smart Plug (_TZ3000)
Turn on
Smart Plug (_TZ3000)
Turn off
Smart Plug (_TZ3000)
Toggle on or off
Smart Plug (_TZ3210)
Turn on
Smart Plug (_TZ3210)
Turn off
Smart Plug (_TZ3210)
Toggle on or off
Smart Plug with metering
Turn on
Smart Plug with metering
Turn off
Smart Plug with metering
Toggle on or off
Sonoff Energy Meter
Reset accumulated consumption
Sends the energy meter reset command, identified via sniffer analysis and confirmed working on real hardware.
Switch (Basic ZBR3)
Turn on
Switch (Basic ZBR3)
Turn off
Switch (Basic ZBR3)
Toggle on or off
ZBMINI-R2 Switch
Turn on
ZBMINI-R2 Switch
Turn off
ZBMINI-R2 Switch
Toggle on or off
Support
Having an issue with this app? Contact the developer via email.
What’s new
Version 1.0.24 — Fix Time cluster binding gaps causing binding_unavailable errors on several drivers; fix IAS zone status bit decoding for gas detector and door/window sensor; improve availability detection for select Sonoff switches
HomeSuite
HomeSuite is not compatible with the selected Homey.
HomeSuite will install on Homey shortly.
Changelog
We’ll send a thank you to Gabriel Pedrosa Machado!
We’ll let Gabriel Pedrosa Machado know you love the app.
Your suggestion has been sent
We’ll notify Gabriel Pedrosa Machado you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
