Bridge
The Offline Alarm turned Off
Zigbee2MQTT
Use Zigbee devices via MQTT
Connect Zigbee devices to Homey via Zigbee2MQTT.
Device capabilities are automatically imported in Homey. It enables monitoring and control from the Homey mobile app, and Homey flows.
This app supports many, but not all devices and capabilities. Supported device types include Door/Window contacts, buttons, power sockets, humidity and other sensors, thermostats and lights.
For information and support, go to: https://community.homey.app/t/83214
Before you start in Homey, you need to have Zigbee2MQTT running, e.g. on a Raspberry Pi. You can find further information on: https://zigbee2mqtt.io
Dispositivi supportati
Schede dei Flow
Clicca su un dispositivo qui sopra per visualizzare solo le schede dei Flow correlate.
Quando...
Bridge
The Offline Alarm turned On
Bridge
Joining turned Off
Bridge
Joining turned On
Bridge
The number of joined devices changed
Bridge
The messages per minute changed
Device
The action changed
Device
Action event received.
An action event matching given string was received.
Device
The Fault Alarm turned Off
Device
The Fault Alarm turned On
Device
The Gas Alarm turned Off
Device
The Gas Alarm turned On
Device
The Occupancy Alarm turned Off
Device
The Occupancy Alarm turned On
Device
The Presence Alarm turned Off
Device
The Presence Alarm turned On
Device
The Vibration Alarm turned Off
Device
The Vibration Alarm turned On
Device
The Color Power On Behavior changed
Device
The X-angle changed
Device
The Y-angle changed
Device
The Z-angle changed
Device
The strength changed
Device
The dim level L1 changed
Device
The dim level L2 changed
Device
The Indicator Mode changed
Device
The soil humidity changed
Device
The link quality changed
Device
The luminance lux changed
Device
The device temperature changed
Device
The sensor temperature changed
Device
The motion state changed
Device
Backlight turned Off
Device
Backlight turned On
Device
Center Turned Off
Device
Center Turned On
Device
L1 turned Off
Device
L1 turned On
Device
L2 turned Off
Device
L2 turned On
Device
L3 turned Off
Device
L3 turned On
Device
L4 turned Off
Device
L4 turned On
Device
Left Turned Off
Device
Left Turned On
Device
Right Turned Off
Device
Right Turned On
Device
The Power On Behavior changed
Device
The Power Outage Memory changed
Device
The preset changed
Device
The running state changed
Device
The sensitivity changed
Device
The switch type changed
Device
The switch type Center changed
Device
The switch type L1 changed
Device
The switch type L1 changed
Device
The switch type Left changed
Device
The switch type Right changed
Device
The preset changed
Device
The target temperature changed
Device
The valve state changed
Group
The action changed
Group
Action event received.
An action event matching given string was received.
Group
The Fault Alarm turned Off
Group
The Fault Alarm turned On
Group
The Gas Alarm turned Off
Group
The Gas Alarm turned On
Group
The Occupancy Alarm turned Off
Group
The Occupancy Alarm turned On
Group
The Presence Alarm turned Off
Group
The Presence Alarm turned On
Group
The Vibration Alarm turned Off
Group
The Vibration Alarm turned On
Group
The Color Power On Behavior changed
Group
The X-angle changed
Group
The Y-angle changed
Group
The Z-angle changed
Group
The strength changed
Group
The dim level L1 changed
Group
The dim level L2 changed
Group
The Indicator Mode changed
Group
The soil humidity changed
Group
The link quality changed
Group
The luminance lux changed
Group
The device temperature changed
Group
The sensor temperature changed
Group
The motion state changed
Group
Backlight turned Off
Group
Backlight turned On
Group
Center Turned Off
Group
Center Turned On
Group
L1 turned Off
Group
L1 turned On
Group
L2 turned Off
Group
L2 turned On
Group
L3 turned Off
Group
L3 turned On
Group
L4 turned Off
Group
L4 turned On
Group
Left Turned Off
Group
Left Turned On
Group
Right Turned Off
Group
Right Turned On
Group
The Power On Behavior changed
Group
The Power Outage Memory changed
Group
The preset changed
Group
The running state changed
Group
The sensitivity changed
Group
The switch type changed
Group
The switch type Center changed
Group
The switch type L1 changed
Group
The switch type L1 changed
Group
The switch type Left changed
Group
The switch type Right changed
Group
The preset changed
Group
The target temperature changed
Group
The valve state changed
Poi...
Bridge
Allow device joining On
When On, the Zigbee2MQTT bridge will allow joining for 5 minutes.
Bridge
Restart Z2M
Restart the Zigbee2MQTT bridge
Bridge
Set log level to ...
INFO or DEBUG level is required for the Msgs/minute counter.
Device
Set Color Power On Behavior to ...
Device
Set payload to Payload
Place text in quotation marks:
{"child_lock": "LOCK"}.
Use numbers without quotation marks:
{ "current_heating_setpoint": 21 }
Device
Dim L1 to %
Device
Dim L2 to %
Device
Set Color Power On Behavior to ...
Device
Set Indicator Mode to ...
Device
Turn Child Lock on: On
Device
Backlight On
Device
Switch Center On
Device
Switch indicator On
Device
Switch L1 On
Device
Switch L2 On
Device
Switch L3 On
Device
Switch L4 On
Device
Switch Left On
Device
Switch Right On
Device
Set system mode to heat Heat
Device
Set Power On Behavior to ...
Device
Set Power Outage Memory to ...
Device
Set Preset to ...
Device
Set Sensor to ...
Device
Set Switch Type to ...
Device
Set Center Switch Type to ...
Device
Set L1 Switch Type to ...
Device
Set L2 Switch Type to ...
Device
Set Left Switch Type to ...
Device
Set Right Switch Type to ...
Device
Set target temperature to ...
Device
Set valve state to %
Group
Set Color Power On Behavior to ...
Group
Dim L1 to %
Group
Dim L2 to %
Group
Set Color Power On Behavior to ...
Group
Set Indicator Mode to ...
Group
Turn Child Lock on: On
Group
Backlight On
Group
Switch Center On
Group
Switch indicator On
Group
Switch L1 On
Group
Switch L2 On
Group
Switch L3 On
Group
Switch L4 On
Group
Switch Left On
Group
Switch Right On
Group
Set system mode to heat Heat
Group
Set Power On Behavior to ...
Group
Set Power Outage Memory to ...
Group
Set Preset to ...
Group
Set Sensor to ...
Group
Set Switch Type to ...
Group
Set Center Switch Type to ...
Group
Set L1 Switch Type to ...
Group
Set L2 Switch Type to ...
Group
Set Left Switch Type to ...
Group
Set Right Switch Type to ...
Group
Set target temperature to ...
Group
Set valve state to %
Supporto
Hai un problema con questa app? Contatta lo sviluppatore qui.
Novità
Versione 2.5.1 — Added support for ZG-204ZM presence sensor. Stability improvements.
Zigbee2MQTT
Zigbee2MQTT non è compatibile con l'Homey selezionato.
Zigbee2MQTTverrà installato a breve su Homey.
Changelog
Inviaremos un ringraziamento a Robin de Gruijter!
Faremo sapere a Robin de Gruijter che ami l'applicazione. Forse potresti considerare di supportare Robin de Gruijter facendo una donazione?
Dona a Robin de Gruijter
Lo sviluppatore di Zigbee2MQTT accetta donazioni.
Fai una donazione per ringraziarlo!
Il tuo suggerimento è stato inviato
Avviseremo Robin de Gruijter che hai inviato un suggerimento.
