Pool
La temperatura è cambiata
Violet Pool Control
Protects your pool's water balance — before problems start.
Bring your PoolDigital Violet or BADU Blue pool controller into Homey over the local network. See live water chemistry and temperatures, pump and equipment state, and dosing, and control the filter pump, light and PV-surplus mode.
An optional Langelier (LSI) water-balance safety net warns you before the water turns corrosive or scaling. All readings feed Homey Insights and Flow.
Alarm notifications (NOTIFY): the app can receive the Violet's alarm pushes and fire the "An alarm was received" Flow trigger. In the Violet's notification settings, set Homey's IP and the "Alarm listener port" from the device settings as receiver (any path, plain HTTP GET). Important: the Violet's regular web interface cannot change the receiver PORT - open http://<violet-ip>/modifyParameter.htm?NOTIFY_http_baseport in a browser (an undocumented parameter page with an input form), enter the listener port (default 22222) and save. Note: the Violet supports neither HTTPS nor authentication for NOTIFY, so any device on your LAN could send such a request — the trigger is display/automation data only and can never control the pool. Keep the port LAN-only; never port-forward it.
Dispositivi supportati
Schede dei Flow
Clicca su un dispositivo qui sopra per visualizzare solo le schede dei Flow correlate.
Quando...
Pool
Il livello di pH è cambiato
Pool
An alarm was received (Error code filter (optional))
Fires when the Violet pushes an alarm via its NOTIFY feature (HTTP). In the Violet's notification settings, set Homey's IP and the listener port from this device's settings as receiver — any path works.
Pool
Backwash valve fault
Fires when the backwash multiport (OMNI) valve reports a non-OK state.
Pool
Dosing blocked
Fires when a dosing channel hits its safety cap (chemistry stops being corrected).
Pool
Dosing chemical low
Fires when a dosing canister drops below the configured days-left threshold.
Pool
LSI warning (When)
Fires when the water balance enters a corrosive or scale-forming band.
Pool
Overflow dry-run
Fires when the overflow tank reports a dry-run (equipment risk).
Pool
Overflow overfill
Fires when the overflow tank reports overfill (flood risk).
Poi...
Pool
Set DMX scene Scene (1-12) to Mode
Requires control to be enabled.
Pool
Set all lights & scenes to Mode
Requires control to be enabled. Applies to LIGHT and every DMX scene at once.
Pool
Set light to Mode
Requires control to be enabled. Color briefly blinks simple LED lights.
Pool
Set pump to Mode for Duration (min, 0 = permanent) min at speed Speed
Requires control to be enabled in the device settings.
Pool
Set PV surplus State at speed Speed
Requires control to be enabled.
Pool
Set calcium Calcium hardness, alkalinity Total alkalinity, CYA Cyanuric acid (ppm)
Writes the slow-changing LSI chemistry values into this device's settings (in their configured units).
Supporto
Hai un problema con questa app? Contatta lo sviluppatore tramite Forum della community di Homey.
Novità
Versione 0.7.3 — New: receive the Violet's alarm notifications (NOTIFY) directly - the 'An alarm was received' Flow trigger delivers error code and description; configurable listener port (default 22222), no extra apps needed. Fixed: all alarm Flow triggers (LSI warning, dosing blocked/low, overflow, backwash valve) now correctly fire Flows - please re-select the Pool device once in existing Flows using these cards.
Violet Pool Control
Violet Pool Control non è compatibile con l’Homey selezionato.
Violet Pool Controlverrà installato a breve su Homey.
Changelog
Inviaremos un ringraziamento a Torsten Sturm!
Faremo sapere a Torsten Sturm che ami l’applicazione.
Il tuo suggerimento è stato inviato
Avviseremo Torsten Sturm che hai inviato un suggerimento.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
