Creality CR-M4
Print completed
Creality
Control your Creality 3D printers
Creality for Homey
Control your Creality 3D printers (K1 family, Ender-3 V3 family, Hi, Hi Combo, K2-compatible K1 protocol models, CR-M4, and Klipper/Moonraker based printers) directly from Homey Pro!
Features:
- Real-time monitoring of nozzle, bed, and chamber temperatures, including target temperatures.
- Set nozzle and bed target temperatures from the device page or Flows.
- Print progress tracking with percentage, remaining time, and current/total layers.
- Print speed and flow rate monitoring and control (M220/M221).
- Fan speed control (part cooling / case / side fan).
- Live print status updates and a "Print error occurred" Flow trigger with the error message.
- Hi Combo CFS details (temperature, humidity, slot overview with material/color/remaining %, and the active filament slot).
- Dashboard widget with print preview, layer progress, event-based updates and a 5-second fallback refresh.
- Pause, Resume, and Stop print controls.
- Control printer light directly from Homey.
- Flow card support for print completion, filament runout, print state transitions (started/paused/resumed/stopped), print errors, and automated controls.
- Flow conditions: printing/paused state, light status, filament runout status, progress threshold, layer threshold, and Hi Combo CFS thresholds.
- Automatic printer discovery via mDNS during pairing (manual IP entry is still available).
Supported Printers:
- **Creality K1 / K1C / K1 SE / K1 Max** (Direct WebSocket, port 9999)
- **Creality Ender-3 V3 family** (stock Creality firmware, via the K1 driver)
- **Creality Hi / Hi Combo** (Direct WebSocket, port 9999)
- **Creality K2-compatible models** (via K1/K1 Max WebSocket protocol)
- **Creality CR-M4** (via Sonic Pad / Moonraker, port 7125 or 80)
- **Generic Klipper Printers** (via Moonraker API, port 7125 or 80)
Setup:
1. On your printer, go to Settings -> Network to find the IP address.
2. In Homey, add a new Creality device — pick your printer from the discovered list or enter the IP address manually.
3. Configure the port (default: 9999 for K1/K1 Max/Hi/Hi Combo, 7125 or 80 for Moonraker/Klipper).
4. Add the "Print Status" widget to your dashboard for real-time monitoring!
Note: Requires Homey Pro 2023 or later.
Appareils pris en charge
Cartes Flow
Cliquez sur un appareil ci-dessus pour afficher uniquement les cartes Flow associées.
Quand...
Triggered when a print job is completed
Creality CR-M4
Filament runout
Triggered when the printer detects that the filament has run out
Creality CR-M4
Print started
Triggered when printing starts
Creality CR-M4
Print paused
Triggered when printing is paused
Creality CR-M4
Print resumed
Triggered when a paused print resumes
Creality CR-M4
Print stopped
Triggered when printing stops and becomes idle
Creality CR-M4
Print error occurred
Triggered when the printer reports an error
Creality Hi
Print completed
Triggered when a print job is completed
Creality Hi
Filament runout
Triggered when the printer detects that the filament has run out
Creality Hi
Print started
Triggered when printing starts
Creality Hi
Print paused
Triggered when printing is paused
Creality Hi
Print resumed
Triggered when a paused print resumes
Creality Hi
Print stopped
Triggered when printing stops and becomes idle
Creality Hi
Print error occurred
Triggered when the printer reports an error
Creality Hi Combo
Print completed
Triggered when a print job is completed
Creality Hi Combo
Filament runout
Triggered when the printer detects that the filament has run out
Creality Hi Combo
Print started
Triggered when printing starts
Creality Hi Combo
Print paused
Triggered when printing is paused
Creality Hi Combo
Print resumed
Triggered when a paused print resumes
Creality Hi Combo
Print stopped
Triggered when printing stops and becomes idle
Creality Hi Combo
Print error occurred
Triggered when the printer reports an error
Creality K1 / Ender V3 Series
Print completed
Triggered when a print job is completed
Creality K1 / Ender V3 Series
Filament runout
Triggered when the printer detects that the filament has run out
Creality K1 / Ender V3 Series
Print started
Triggered when printing starts
Creality K1 / Ender V3 Series
Print paused
Triggered when printing is paused
Creality K1 / Ender V3 Series
Print resumed
Triggered when a paused print resumes
Creality K1 / Ender V3 Series
Print stopped
Triggered when printing stops and becomes idle
Creality K1 / Ender V3 Series
Print error occurred
Triggered when the printer reports an error
Generic Klipper Printer
Print completed
Triggered when a print job is completed
Generic Klipper Printer
Filament runout
Triggered when the printer detects that the filament has run out
Generic Klipper Printer
Print started
Triggered when printing starts
Generic Klipper Printer
Print paused
Triggered when printing is paused
Generic Klipper Printer
Print resumed
Triggered when a paused print resumes
Generic Klipper Printer
Print stopped
Triggered when printing stops and becomes idle
Generic Klipper Printer
Print error occurred
Triggered when the printer reports an error
Et...
Creality CR-M4
Is printing
True when the printer state is printing
Creality CR-M4
Is paused
True when the printer state is paused
Creality CR-M4
Is light on
True when chamber light is on
Creality CR-M4
Has filament runout
True when filament runout alarm is active
Creality CR-M4
Print progress is at least Progress (%)%
True when print progress reaches the given threshold
Creality CR-M4
Current layer is at least Layer
True when the current layer reaches the given number
Creality Hi
Is printing
True when the printer state is printing
Creality Hi
Is paused
True when the printer state is paused
Creality Hi
Is light on
True when chamber light is on
Creality Hi
Has filament runout
True when filament runout alarm is active
Creality Hi
Print progress is at least Progress (%)%
True when print progress reaches the given threshold
Creality Hi
Current layer is at least Layer
True when the current layer reaches the given number
Creality Hi Combo
Is printing
True when the printer state is printing
Creality Hi Combo
Is paused
True when the printer state is paused
Creality Hi Combo
Is light on
True when chamber light is on
Creality Hi Combo
Has filament runout
True when filament runout alarm is active
Creality Hi Combo
Print progress is at least Progress (%)%
True when print progress reaches the given threshold
Creality Hi Combo
CFS temperature is at least Temperature (C) C
True when CFS temperature reaches the given threshold
Creality Hi Combo
CFS humidity is at least Humidity (%)%
True when CFS humidity reaches the given threshold
Creality Hi Combo
Current layer is at least Layer
True when the current layer reaches the given number
Creality K1 / Ender V3 Series
Is printing
True when the printer state is printing
Creality K1 / Ender V3 Series
Is paused
True when the printer state is paused
Creality K1 / Ender V3 Series
Is light on
True when chamber light is on
Creality K1 / Ender V3 Series
Has filament runout
True when filament runout alarm is active
Creality K1 / Ender V3 Series
Print progress is at least Progress (%)%
True when print progress reaches the given threshold
Creality K1 / Ender V3 Series
Current layer is at least Layer
True when the current layer reaches the given number
Generic Klipper Printer
Is printing
True when the printer state is printing
Generic Klipper Printer
Is paused
True when the printer state is paused
Generic Klipper Printer
Is light on
True when chamber light is on
Generic Klipper Printer
Has filament runout
True when filament runout alarm is active
Generic Klipper Printer
Print progress is at least Progress (%)%
True when print progress reaches the given threshold
Generic Klipper Printer
Current layer is at least Layer
True when the current layer reaches the given number
Alors...
Creality CR-M4
Home all axes
Move all axes to the home position (G28)
Creality CR-M4
Turn light off
Turn the printer light off
Creality CR-M4
Turn light on
Turn the printer light on
Creality CR-M4
Move X axis Distance (mm)mm in - direction
Move the X axis in the negative direction by the specified distance
Creality CR-M4
Move X axis Distance (mm)mm in + direction
Move the X axis in the positive direction by the specified distance
Creality CR-M4
Move Y axis Distance (mm)mm in - direction
Move the Y axis in the negative direction by the specified distance
Creality CR-M4
Move Y axis Distance (mm)mm in + direction
Move the Y axis in the positive direction by the specified distance
Creality CR-M4
Move Z axis Distance (mm)mm in - direction
Move the Z axis in the negative direction by the specified distance
Creality CR-M4
Move Z axis Distance (mm)mm in + direction
Move the Z axis in the positive direction by the specified distance
Creality CR-M4
Pause print
Pause the current print job
Creality CR-M4
Resume print
Resume a paused print job
Creality CR-M4
Stop print
Stop the current print job
Creality CR-M4
Set nozzle temperature to Temperature (°C)°C
Set the nozzle target temperature (0 turns the heater off)
Creality CR-M4
Set bed temperature to Temperature (°C)°C
Set the heated bed target temperature (0 turns the heater off)
Creality CR-M4
Set print speed to Speed (%)%
Set the print speed factor (M220)
Creality CR-M4
Set flow rate to Flow (%)%
Set the extrusion flow rate factor (M221)
Creality CR-M4
Set Fan to Speed (%)%
Set a printer fan speed (M106). On Klipper printers only the part cooling fan is supported.
Creality Hi
Home all axes
Move all axes to the home position (G28)
Creality Hi
Turn light off
Turn the printer light off
Creality Hi
Turn light on
Turn the printer light on
Creality Hi
Move X axis Distance (mm)mm in - direction
Move the X axis in the negative direction by the specified distance
Creality Hi
Move X axis Distance (mm)mm in + direction
Move the X axis in the positive direction by the specified distance
Creality Hi
Move Y axis Distance (mm)mm in - direction
Move the Y axis in the negative direction by the specified distance
Creality Hi
Move Y axis Distance (mm)mm in + direction
Move the Y axis in the positive direction by the specified distance
Creality Hi
Move Z axis Distance (mm)mm in - direction
Move the Z axis in the negative direction by the specified distance
Creality Hi
Move Z axis Distance (mm)mm in + direction
Move the Z axis in the positive direction by the specified distance
Creality Hi
Pause print
Pause the current print job
Creality Hi
Resume print
Resume a paused print job
Creality Hi
Stop print
Stop the current print job
Creality Hi
Set nozzle temperature to Temperature (°C)°C
Set the nozzle target temperature (0 turns the heater off)
Creality Hi
Set bed temperature to Temperature (°C)°C
Set the heated bed target temperature (0 turns the heater off)
Creality Hi
Set print speed to Speed (%)%
Set the print speed factor (M220)
Creality Hi
Set flow rate to Flow (%)%
Set the extrusion flow rate factor (M221)
Creality Hi
Set Fan to Speed (%)%
Set a printer fan speed (M106). On Klipper printers only the part cooling fan is supported.
Creality Hi Combo
Home all axes
Move all axes to the home position (G28)
Creality Hi Combo
Turn light off
Turn the printer light off
Creality Hi Combo
Turn light on
Turn the printer light on
Creality Hi Combo
Move X axis Distance (mm)mm in - direction
Move the X axis in the negative direction by the specified distance
Creality Hi Combo
Move X axis Distance (mm)mm in + direction
Move the X axis in the positive direction by the specified distance
Creality Hi Combo
Move Y axis Distance (mm)mm in - direction
Move the Y axis in the negative direction by the specified distance
Creality Hi Combo
Move Y axis Distance (mm)mm in + direction
Move the Y axis in the positive direction by the specified distance
Creality Hi Combo
Move Z axis Distance (mm)mm in - direction
Move the Z axis in the negative direction by the specified distance
Creality Hi Combo
Move Z axis Distance (mm)mm in + direction
Move the Z axis in the positive direction by the specified distance
Creality Hi Combo
Pause print
Pause the current print job
Creality Hi Combo
Resume print
Resume a paused print job
Creality Hi Combo
Stop print
Stop the current print job
Creality Hi Combo
Set nozzle temperature to Temperature (°C)°C
Set the nozzle target temperature (0 turns the heater off)
Creality Hi Combo
Set bed temperature to Temperature (°C)°C
Set the heated bed target temperature (0 turns the heater off)
Creality Hi Combo
Set print speed to Speed (%)%
Set the print speed factor (M220)
Creality Hi Combo
Set flow rate to Flow (%)%
Set the extrusion flow rate factor (M221)
Creality Hi Combo
Set Fan to Speed (%)%
Set a printer fan speed (M106). On Klipper printers only the part cooling fan is supported.
Creality K1 / Ender V3 Series
Home all axes
Move all axes to the home position (G28)
Creality K1 / Ender V3 Series
Turn light off
Turn the printer light off
Creality K1 / Ender V3 Series
Turn light on
Turn the printer light on
Creality K1 / Ender V3 Series
Move X axis Distance (mm)mm in - direction
Move the X axis in the negative direction by the specified distance
Creality K1 / Ender V3 Series
Move X axis Distance (mm)mm in + direction
Move the X axis in the positive direction by the specified distance
Creality K1 / Ender V3 Series
Move Y axis Distance (mm)mm in - direction
Move the Y axis in the negative direction by the specified distance
Creality K1 / Ender V3 Series
Move Y axis Distance (mm)mm in + direction
Move the Y axis in the positive direction by the specified distance
Creality K1 / Ender V3 Series
Move Z axis Distance (mm)mm in - direction
Move the Z axis in the negative direction by the specified distance
Creality K1 / Ender V3 Series
Move Z axis Distance (mm)mm in + direction
Move the Z axis in the positive direction by the specified distance
Creality K1 / Ender V3 Series
Pause print
Pause the current print job
Creality K1 / Ender V3 Series
Resume print
Resume a paused print job
Creality K1 / Ender V3 Series
Stop print
Stop the current print job
Creality K1 / Ender V3 Series
Set nozzle temperature to Temperature (°C)°C
Set the nozzle target temperature (0 turns the heater off)
Creality K1 / Ender V3 Series
Set bed temperature to Temperature (°C)°C
Set the heated bed target temperature (0 turns the heater off)
Creality K1 / Ender V3 Series
Set print speed to Speed (%)%
Set the print speed factor (M220)
Creality K1 / Ender V3 Series
Set flow rate to Flow (%)%
Set the extrusion flow rate factor (M221)
Creality K1 / Ender V3 Series
Set Fan to Speed (%)%
Set a printer fan speed (M106). On Klipper printers only the part cooling fan is supported.
Generic Klipper Printer
Home all axes
Move all axes to the home position (G28)
Generic Klipper Printer
Turn light off
Turn the printer light off
Generic Klipper Printer
Turn light on
Turn the printer light on
Generic Klipper Printer
Move X axis Distance (mm)mm in - direction
Move the X axis in the negative direction by the specified distance
Generic Klipper Printer
Move X axis Distance (mm)mm in + direction
Move the X axis in the positive direction by the specified distance
Generic Klipper Printer
Move Y axis Distance (mm)mm in - direction
Move the Y axis in the negative direction by the specified distance
Generic Klipper Printer
Move Y axis Distance (mm)mm in + direction
Move the Y axis in the positive direction by the specified distance
Generic Klipper Printer
Move Z axis Distance (mm)mm in - direction
Move the Z axis in the negative direction by the specified distance
Generic Klipper Printer
Move Z axis Distance (mm)mm in + direction
Move the Z axis in the positive direction by the specified distance
Generic Klipper Printer
Pause print
Pause the current print job
Generic Klipper Printer
Resume print
Resume a paused print job
Generic Klipper Printer
Stop print
Stop the current print job
Generic Klipper Printer
Set nozzle temperature to Temperature (°C)°C
Set the nozzle target temperature (0 turns the heater off)
Generic Klipper Printer
Set bed temperature to Temperature (°C)°C
Set the heated bed target temperature (0 turns the heater off)
Generic Klipper Printer
Set print speed to Speed (%)%
Set the print speed factor (M220)
Generic Klipper Printer
Set flow rate to Flow (%)%
Set the extrusion flow rate factor (M221)
Generic Klipper Printer
Set Fan to Speed (%)%
Set a printer fan speed (M106). On Klipper printers only the part cooling fan is supported.
Widgets
Assistance
Vous avez un problème avec cette appli ? Contacter le développeur en envoyant un e-mail.
Nouveautés
Version 1.2.10 — Bug fixes
Creality
Creality n’est pas compatible avec le Homey sélectionné.
Creality va s’installer sur Homey dans un instant.
Journal des modifications
Nous enverrons un merci à ugrbnk . !
Nous ferons savoir à ugrbnk . que vous adorez l’application. Peut-être envisagez-vous de soutenir ugrbnk . en faisant un don ?
Faire un don à ugrbnk .
Le développeur de Creality accepte les dons.
Faites un don pour dire merci !
Votre suggestion a été envoyée
Nous informerons ugrbnk . que vous avez envoyé une suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
