Ramses Gateway
A packet was received
RAMSES ESP
Let your home ventilation respond to CO₂, humidity and your daily routine.
¡Advertencia! Es posible que esta aplicación no funcione correctamente.
Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.
Bring your 868 MHz ventilation system into Homey through a ramses_esp gateway: set the fan mode, start a boost, reset the filter counter and see CO₂, humidity, temperatures and bypass position of your heat recovery unit. Physical remotes become flow triggers, room sensors become Homey devices, and every packet on the bus can start a flow.
The app connects to the MQTT broker your ramses_esp already uses, for example the MQTT Broker app on Homey. It finds the gateway by itself, scans the bus for devices and shows live traffic with decoded values in the app settings.
Unofficial community app; not made or endorsed by the manufacturers of the devices or by the ramses_esp authors.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
Fires for every packet on the bus.
Ramses Gateway
A 22F1 packet was received from or to * or 29:123456
Address * matches any device.
Ramses Gateway
A new device was found on the bus
Ramses Gateway
The gateway went offline
Ramses Gateway
The gateway came online
Remote
The ... button was pressed
Remote
Any button was pressed
Room sensor
The ... button was pressed
Room sensor
Any button was pressed
Ventilation unit
The fan mode changed
Ventilation unit
The fan mode changed to ...
Ventilation unit
A boost started
Ventilation unit
The unit reported a fault
Ventilation unit
The fault of the unit is gone
Ventilation unit
The filter needs replacing
Virtual CO₂ sensor
El nivel de CO₂ ha cambiado
Virtual CO₂ sensor
La humedad ha cambiado
Y...
Ramses Gateway
The gateway is online
Ventilation unit
The fan mode is ...
Ventilation unit
The unit has fault
Entonces...
Ramses Gateway
Send frame I --- 29:173894 29:233244 --:------ 22F1 003 000304
A complete RAMSES II frame, e.g. I --- 29:173894 29:233244 --:------ 22F1 003 000304
Ramses Gateway
Send ... 31DA with payload 00 to 29:123456
Sent from the gateway's own address.
Ventilation unit
Set the fan mode to ...
Ventilation unit
Run on high for 30 minutes
Ventilation unit
Reset the filter counter
Ventilation unit
Ask the unit for its status
Ventilation unit
Set the bypass to ...
Ventilation unit
Set Parameter to Value
For heat recovery units with parameters.
Virtual CO₂ sensor
Report ppm ppm CO₂
Use a CO₂ value from any Homey sensor; the unit treats it as its own sensor.
Virtual CO₂ sensor
Report % % humidity
Virtual CO₂ sensor
Ask the unit for % % ventilation
In auto mode the unit ventilates more as the demand rises.
Widgets
Asistencia
¿Tienes algún problema con esta aplicación? Contacta con el desarrollador aquí.
Novedades
Versión 1.0.5 — New app image and a picture of the real device for each driver, so you can see at a glance which one to add. Shorter app description.
RAMSES ESP
RAMSES ESP no es compatible con el Homey seleccionado.
RAMSES ESP se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Bryan van der Starre!
Le haremos saber a Bryan van der Starre que te encanta la aplicación.
Se han enviado tus sugerencias
Avisaremos a Bryan van der Starre para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
