C6/C6M ventilation unit
La potencia ha cambiado
Komfovent C6M
Fresh air, perfectly automated — fast, private and fully local.
¡Advertencia! Es posible que esta aplicación no funcione correctamente.
Esta aplicación se está probando y nunca se ha revisado. Puede que no funcione como se espera.
Ten mucho cuidado al instalar esta aplicación.
Bring your Komfovent DOMEKT ventilation system into Homey with fast, private control over your local network. This independent Community app communicates directly with compatible C6M controllers through Modbus TCP, without a vendor cloud account, and is not affiliated with or endorsed by Komfovent.
Keep your indoor air under control from Homey, automate ventilation with Flow, follow live power and total energy in Homey Energy and see the system at a glance on your Dashboard. A compatible, correctly configured C6/C6M controller with a reserved local IP address is required. Physical beta testing currently covers DOMEKT R700 with C6M firmware 1.4.47.74; every installation is checked read-only before it is paired.
Dispositivos compatibles
Tarjetas Flow
Haz clic en el dispositivo de arriba para mostrar solo las tarjetas Flow relacionadas.
Cuando...
C6/C6M ventilation unit
El contador de energía ha cambiado
C6/C6M ventilation unit
La alarma general se ha activado
C6/C6M ventilation unit
La alarma general se ha desactivado
C6/C6M ventilation unit
Control failed
Y...
C6/C6M ventilation unit
La alarma general está activada
C6/C6M ventilation unit
Control is ready
C6/C6M ventilation unit
An alarm is active
C6/C6M ventilation unit
Ventilation mode is Mode
Entonces...
C6/C6M ventilation unit
Set Intensive profile to Supply target/Extract target percent
Writes both Intensive targets atomically with FC16, verifies exact readback and permits a maximum difference of 50 percentage points.
C6/C6M ventilation unit
Set ventilation to Mode
Changes only to Away, Normal, Intensive or Boost and verifies the exact Modbus readback.
C6/C6M ventilation unit
Set Profile airflow targets to Supply target/Extract target percent
Stores both targets atomically in the selected profile, verifies exact readback and permits a maximum difference of 50 percentage points.
C6/C6M ventilation unit
Set reheating permission for Profile: Permission
Allowed means the ventilation unit may use electric reheating when heat is needed; it does not force the heater on.
Widgets
Asistencia
El desarrollador de esta aplicación no ofrece soporte directo.
Novedades
Versión 1.2.5 — Fixes control being blocked by the W1 filter-maintenance reminder, adds precise alarm messages, preserves profile edits until confirmed, and hardens in-flight control settings and connection handling. Includes the 1.2.2-1.2.4 timeout and safe-recovery fixes. Faults and unknown alarm states remain blocked; writes are never automatically retried.
Komfovent C6M
Komfovent C6M no es compatible con el Homey seleccionado.
Komfovent C6M se instalará en Homey en breve.
Registro de cambios
¡Enviaremos un agradecimiento a Trond Ole Namlos!
Le haremos saber a Trond Ole Namlos que te encanta la aplicación. Quizás consideres apoyar a Trond Ole Namlos haciendo una donación.
Donar a Trond Ole Namlos
El desarrollador de Komfovent C6M acepta donaciones.
¡Haz una donación para dar las gracias!
Se han enviado tus sugerencias
Avisaremos a Trond Ole Namlos para que esté al tanto de las sugerencias.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
