Zaptec Go
The power meter changed
Zaptec
Fully charged for your next adventure
Integrate your Zaptec charger with Homey.
Avoid circuit overloading by load balancing your Zaptec charger. Start your charging
session when the power is cheap. Keep statistics over your charging.
This app aims to be a complete integration of Zaptec products. If your product isn't
supported, or some feature is missing, please place an issue in the source code
repository!
Uses your credentials to connect to the Zaptec API. Your credentials are safely
stored on your Homey only!
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Zaptec Go
The power changed
Zaptec Go
The humidity changed
Zaptec Go
The temperature changes
Zaptec Go
The signal strength changed
Zaptec Go
Car connects
When a car becomes connected to the charger
Zaptec Go
Car disconnects
When a car disconnects it's cable from the charger.
Zaptec Go
Charging starts
When a charging session is started
Zaptec Go
Car stops charging
When the charger stops charging the car.
Zaptec Go 2
The power meter changed
Zaptec Go 2
The power changed
Zaptec Go 2
The humidity changed
Zaptec Go 2
The temperature changes
Zaptec Go 2
The signal strength changed
Zaptec Go 2
Car connects
When a car becomes connected to the charger
Zaptec Go 2
Car disconnects
When a car disconnects it's cable from the charger.
Zaptec Go 2
Charging starts
When a charging session is started
Zaptec Go 2
Charging stops
When a charging session is stopped
Zaptec Home
The power meter changed
Zaptec Home
The power changed
Zaptec Home
The humidity changed
Zaptec Home
The signal strength changed
Zaptec Home
Car connects
When a car becomes connected to the charger
Zaptec Home
Car disconnects
When a car disconnects it's cable from the charger.
Zaptec Home
Charging starts
When a charging session is started
Zaptec Home
Charging stops
When a charging session is stopped
Zaptec Pro
The power meter changed
Zaptec Pro
The power changed
Zaptec Pro
The humidity changed
Zaptec Pro
The signal strength changed
Zaptec Pro
Car connects
When a car becomes connected to the charger
Zaptec Pro
Car disconnects
When a car disconnects it's cable from the charger.
Zaptec Pro
Charging starts
When a charging session is started
Zaptec Pro
Charging stops
When a charging session is stopped
And...
Zaptec Go
Charger is charging
Checks if the charger is currently charging a car.
Zaptec Go
Car is connected
Checks if a car is connected to the charger
Zaptec Go
Charging is finished
Zaptec Go
Authentication is required
Zaptec Go 2
Car is charging
Zaptec Go 2
Car is connected
Zaptec Go 2
Charging is finished
Zaptec Go 2
Authentication is required
Zaptec Home
Car is charging
Zaptec Home
Car is connected
Zaptec Home
Charging is finished
Zaptec Home
Authentication is required
Zaptec Pro
Car is charging
Zaptec Pro
Car is connected
Zaptec Pro
Charging is finished
Zaptec Pro
Authentication is required
Then...
Zaptec Go
Set available current to Current P1/Current P2/Current P3
Changes the available current for all chargers within this installation.
Zaptec Go
Start charging
Will start / resume charging.
Zaptec Go
Stop charging
This will stop charging until told to charge again.
Zaptec Go
Lock cable to charging station
This locks the cable to the charger, not the car
Zaptec Go
Unlock cable from charging station
This unlocks the cable from the charger, not the car
Zaptec Go
Reboot charger
Reboots the charger, turing it off and on again
Zaptec Go
Set authentication Authentication requirement
Enable or disable authentication requirement for the installation.
Zaptec Go
Set charging mode to Charging mode
Set the charging mode for the installation.
Zaptec Go 2
Set available current to Current P1/Current P2/Current P3
Changes the available current for all chargers within this installation.
Zaptec Go 2
Start charging
Zaptec Go 2
Stop charging
Zaptec Go 2
Lock cable to charging station
Permanently locks the cable to the charging station
Zaptec Go 2
Unlock cable from charging station
Removes the permanent lock on the cable from the charging station
Zaptec Go 2
Reboot charger
Reboots the charger, turing it off and on again
Zaptec Go 2
Set authentication Authentication requirement
Enable or disable authentication requirement for the installation.
Zaptec Go 2
Set charging mode to Charging mode
Set the charging mode for the installation.
Zaptec Home
Set available current to Current P1/Current P2/Current P3
Changes the available current for all chargers within this installation.
Zaptec Home
Start charging
Zaptec Home
Stop charging
Zaptec Home
Lock cable to charging station
Permanently locks the cable to the charging station
Zaptec Home
Unlock cable from charging station
Removes the permanent lock on the cable from the charging station
Zaptec Home
Reboot charger
Reboots the charger, turing it off and on again
Zaptec Home
Set authentication Authentication requirement
Enable or disable authentication requirement for the installation.
Zaptec Home
Set charging mode to Charging mode
Set the charging mode for the installation.
Zaptec Pro
Set available current to Current P1/Current P2/Current P3
Changes the available current for all chargers within this installation.
Zaptec Pro
Start charging
Zaptec Pro
Stop charging
Zaptec Pro
Lock cable to charging station
Permanently locks the cable to the charging station
Zaptec Pro
Unlock cable from charging station
Removes the permanent lock on the cable from the charging station
Zaptec Pro
Reboot charger
Reboots the charger, turing it off and on again
Zaptec Pro
Set authentication Authentication requirement
Enable or disable authentication requirement for the installation.
Zaptec Pro
Set charging mode to Charging mode
Set the charging mode for the installation.
Widgets
Support
Having an issue with this app? Contact the developer here.
What’s new
Version 1.10.2 — Added power and car connected status to widget. Changes to energy properties. Bug fixes.
Zaptec
Zaptec is not compatible with the selected Homey.
Zaptec will install on Homey shortly.
Changelog
We’ll send a thank you to Patrick Wadström!
We’ll let Patrick Wadström know you love the app. Maybe consider supporting Patrick Wadström by making a donation?
Donate to Patrick Wadström
The developer of Zaptec accepts donations.
Make a donation to say thanks!
Your suggestion has been sent
We’ll notify Patrick Wadström you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
