Actuator / Dimmer
Turned on
Eaton xComfort
Seamless Eaton xComfort control for lights, shades, and heating.
Warning! This app might not work properly.
This app version is currently being tested, and has not yet been reviewed. It might not work as expected.
Be extra careful when installing this app.
This app lets you control Eaton xComfort devices via the xComfort Bridge.
It supports switching and dimming actuators, shading control (open/close/stop with optional position), thermostat setpoints with synced Frost/Economy/Comfort presets, door and window sensors, binary inputs, temperature and humidity sensors, motion sensors, room status sensors with calculated room energy, wall switch button events, water sensors, and bridge diagnostics with calculated main-meter energy.
Configuration: Open App Settings in Homey, add one or more bridges, and enter each Bridge IP Address and Auth Key (found on the back of the bridge). Important: The auth key on the bridge is printed with dashes and spaces between letters and numbers (e.g. XXXX-XXXX-XXXX), but must be entered without dashes or spaces (e.g. XXXXXXXXXXXX) in the app settings. The app also normalizes the key automatically when saved. For stability, reserve each bridge IP in your router (DHCP reservation).
Adding devices: Open the Devices tab, click Add Device, choose Eaton xComfort, pick a device type, then wait for the list to load and select devices to add. Supported device types include Actuator or Dimmer, Shading or Blinds, Thermostat or Heating, Door or Window Sensor, Binary Input, Temperature or Humidity Sensor, Motion Sensor, Room Status, Wall Switch, Water Sensor, and Bridge Diagnostics.
Troubleshooting: Ensure the Bridge works in the official Eaton app, verify the IP address and Auth Key, and confirm the bridge is reachable on your Homey network.
Supported devices
Flow cards
Click on a device above to show related Flow cards only.
When...
Actuator / Dimmer
Turned off
Actuator / Dimmer
The dim level changed
Binary Input
The generic alarm turned on
Binary Input
The generic alarm turned off
Bridge Diagnostics
The temperature changes
Bridge Diagnostics
The power changed
Bridge Diagnostics
The power meter changed
Bridge Diagnostics
The heat alarm turned on
Bridge Diagnostics
The heat alarm turned off
Bridge Diagnostics
Turned on
Bridge Diagnostics
Turned off
Bridge Diagnostics
The generic alarm turned on
Bridge Diagnostics
The generic alarm turned off
Bridge Diagnostics
The motion alarm turned on
Bridge Diagnostics
The motion alarm turned off
Door / Window Sensor
The contact alarm turned on
Door / Window Sensor
The contact alarm turned off
Motion Sensor
The motion alarm turned on
Motion Sensor
The motion alarm turned off
Room Status
The temperature changes
Room Status
The humidity changed
Room Status
The power changed
Room Status
The power meter changed
Shading / Blinds
The state changed ...
Shading / Blinds
The position changed
Temperature / Humidity Sensor
The temperature changes
Thermostat / Heating
The temperature changes
Thermostat / Heating
The target temperature changed
Thermostat / Heating
Thermostat mode changed ...
Thermostat / Heating
Thermostat button pressed (right/on)
Thermostat / Heating
Thermostat button pressed (left/off)
Thermostat / Heating
Heating preset changed
Wall Switch
Turned on
Wall Switch
Turned off
Wall Switch
Wall switch pressed (any)
Wall Switch
Wall switch pressed (up/on)
Wall Switch
Wall switch pressed (down/off)
Water Sensor
The water alarm turned on
Water Sensor
The water alarm turned off
And...
Actuator / Dimmer
Is turned on
Binary Input
The generic alarm is on
Bridge Diagnostics
The heat alarm is on
Bridge Diagnostics
Is turned on
Bridge Diagnostics
The generic alarm is on
Bridge Diagnostics
The motion alarm is on
Door / Window Sensor
The contact alarm is on
Motion Sensor
The motion alarm is on
Shading / Blinds
The state is ...
Thermostat / Heating
Thermostat mode is ...
Thermostat / Heating
Heating preset is ...
Wall Switch
Is turned on
Water Sensor
The water alarm is on
Water Sensor
Water valve is open
Then...
Actuator / Dimmer
Turn on
Actuator / Dimmer
Turn off
Actuator / Dimmer
Toggle on or off
Actuator / Dimmer
Dim to %
Actuator / Dimmer
Set relative dim-level %
Dim or brighten with respect to the device's current dim-level.
Bridge Diagnostics
Turn on
Bridge Diagnostics
Turn off
Bridge Diagnostics
Toggle on or off
Shading / Blinds
Set state ...
Shading / Blinds
Set the position to %
Change the position to open (100%), closed (0%), or a value in between.
Thermostat / Heating
Set the temperature °C
Thermostat / Heating
Set the mode ...
Thermostat / Heating
Set heating preset to ...
Wall Switch
Turn on
Wall Switch
Turn off
Wall Switch
Toggle on or off
Water Sensor
Set water valve to ...
Support
Having an issue with this app? Contact the developer via the developer website.
What’s new
Version 1.4.33 — Fixed pairing lists so already-installed devices are hidden when adding new devices, including legacy single-bridge devices and newer multi-bridge device IDs.
Eaton xComfort
Eaton xComfort is not compatible with the selected Homey.
Eaton xComfort will install on Homey shortly.
Changelog
We’ll send a thank you to Mike Taselaar!
We’ll let Mike Taselaar know you love the app.
Your suggestion has been sent
We’ll notify Mike Taselaar you’ve sent a suggestion.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
