Sessy
Lydstyrke ændrede sig
Sessy
Your smart battery at home.
Monitor and Control your SESSY home battery storage system.
With the Sessy home battery, you can store excess solar power for later use, or you can start trading energy if you have a dynamic contract. Together with the Power By The Hour app you can create smart charge/discharge flows and keep track of how much money your Sessy generates.
Understøttede enheder
Flow-kort
Klik på en enhed ovenfor for kun at vise relaterede Flow-kort.
Når...
Sessy
Batteriniveauet har ændret sig
Sessy
Strømmen ændrede sig
Sessy
The fault Alarm turned On
Sessy
The fault Alarm turned Off
Sessy
The charge mode changed
Sessy
The control mode changed
Sessy
The firmware changed
Sessy
The target power changed
Sessy
New firmware is available
Sessy
The system state changed
Sessy
The max noise level changed
Sessy CT
Strømmen ændrede sig
Sessy CT
The fault Alarm turned On
Sessy CT
The fault Alarm turned Off
Sessy CT
The firmware changed
Sessy CT
New firmware is available
Sessy CT
The system state changed
Sessy P1
Strømmen ændrede sig
Sessy P1
Strømmåleren ændrede sig
Sessy P1
Gasmåleren ændrede sig
Sessy P1
The fault Alarm turned On
Sessy P1
The fault Alarm turned Off
Sessy P1
The firmware changed
Sessy P1
The gas usage changed
Sessy P1
The XOM Grid target power changed
Sessy P1
The power failure count changed
Sessy P1
The voltage sag count changed
Sessy P1
The voltage swell count changed
Sessy P1
New firmware is available
Sessy P1
The system state changed
Sessy P1
Tariff has changed
Så...
Sessy
Indstil lydstyrke til %
Sessy
Set relative volume %
Change the volume with respect to the device's current volume.
Sessy
Reboot dongle
Restart the dongle.
Sessy
Set Sessy charge mode to Charge mode
Charging/Discharging will be set to the maximum capacity.
Sessy
Set Sessy control mode to Control mode
Only when set to 'HOMEY' it is possible to control Sessy from Homey.
Sessy
Set maximum power to Maximum power W
Maximum power with which Sessy works. This setting works in all control modes! Default is 2200 Watts.
Sessy
Set minimum power to Minimum power W
Minimum power with which Sessy works. This setting works in all control modes! Default is 2200 Watts.
Sessy
Set target power to Target power W
Positive = battery will discharge. Negative number = battery will charge. When set to 0 charging/discharging will stop.
Sessy
Set max noise level to Max noise level
A lower noise level limits the power. This setting works in all control modes!
Sessy CT
Reboot dongle
Restart the dongle.
Sessy CT
Set XOM Grid target power to XOM Target power W
Power to subtract from the measured power of the meter. THIS ONLY AFFECTS SESSY XOM CONTROL MODE!
Sessy P1
Reboot dongle
Restart the dongle.
Sessy P1
Set XOM Grid target power to XOM Target power W
Power to subtract from the measured power of the meter. THIS ONLY AFFECTS SESSY XOM CONTROL MODE!
Support
Har du et problem med denne app? Kontant udvikleren ved at sende en e-mail.
Hvad er nyt
Version 2.4.1 — New slider UI and flow cards for system noise level.
Sessy
Sessy er ikke kompatibel med den valgte Homey.
Sessy bliver snart installeret på Homey.
Ændringslog
Vi sender en tak til CHARGED B.V.!
Vi lader CHARGED B.V. vide, at du elsker appen.
Dit forslag er blevet sendt
Vi giver CHARGED B.V. besked, når du har sendt et forslag.
