Solis Battery
Batteriniveauet har ændret sig
Solis Hybrid Inverter
Monitor and control your hybrid solar inverter and home battery over your local network — no cloud
Advarsel! Denne app fungerer muligvis ikke ordentligt.
Denne app er ved at blive testet og er aldrig blevet anmeldt. Den fungerer muligvis ikke som forventet.
Vær ekstra forsigtig, når du installerer denne app.
See your hybrid solar inverter and home battery directly on the local network, with no cloud account in between. Live solar production, battery charge level and power, and inverter temperature are read straight from the data logger over Modbus and shown on a tile and in the Energy dashboard, while a running energy total keeps building across restarts.
Built for households that want their own data on their own network, with flow cards to react to a low battery or a burst of solar production. Local control of the inverter is being developed and stays switched off until you deliberately hand control to Homey.
Understøttede enheder
Flow-kort
Klik på en enhed ovenfor for kun at vise relaterede Flow-kort.
Når...
Solis Battery
Strømmen ændrede sig
Solis Grid
Strømmen ændrede sig
Solis Inverter
Strømmen ændrede sig
Solis Inverter
Strømmåleren ændrede sig
Solis Inverter
Den elektriske spænding ændrede sig
Solis Inverter
Temperaturen ændrede sig
Solis Inverter
Solar surplus rises above 1400 W
Fires when the power being exported to the grid (surplus PV the battery isn't absorbing) crosses above the set value. Use it to divert surplus into an EV charger or other load.
Solis Inverter
Follow-the-sun: charge at recommended current
Fires on each control tick while solar charging should run. The Recommended current token is the EV charging current to apply (e.g. to a Wattpilot).
Solis Inverter
Follow-the-sun: stop charging
Fires when the surplus is no longer enough to keep the EV charging above its minimum current.
Solis Inverter
Production becomes limited
Fires when the inverter starts reducing output — e.g. the grid voltage is too high (volt-watt curtailment), a power/export limit, or thermal derating. The Reason token says which. Adding local load (EV, battery) usually relieves an overvoltage limit.
Solis Inverter
Production no longer limited
Fires when the inverter returns to unrestricted operation after a limit clears.
Solis Inverter
Grid meter feed lost
Fires when the external grid-power feed (e.g. the Plugwise or Tibber meter) stops updating, so house load and self-consumption become unreliable.
Solis Inverter
Grid meter feed restored
Fires when the external grid-power feed resumes updating after being lost.
Solis Inverter
EV charge request fulfilled
Fires when the car reaches the requested charge level (or the request's deadline passes). Use it to notify or run a follow-up Flow.
Og...
Solis Inverter
Production is limited
Solis Inverter
Solar output is limited
Solis Inverter
Battery charge is below 20 %
Solis Inverter
Solar production is above 1000 W
Solis Inverter
EV charge request is active
True while a manual charge request is running — the optimizer is working toward the requested level by its deadline.
Så...
Solis Inverter
Set work mode to ...
Solis Inverter
Grid charging ...
Solis Inverter
Force charge battery at 25 A up to 100 %
Solis Inverter
Force discharge battery at 25 A
Solis Inverter
Stop forced charge or discharge
Solis Inverter
Battery discharge ...
Blocks or allows the battery discharging into the house. Block it during cheap or medium price hours so the grid covers your loads and the pack keeps its charge, then allow it during expensive hours so self-use drains the battery to cover the house. Solar can still charge the battery while discharge is blocked.
Solis Inverter
Set battery reserve to 20 %
Solis Inverter
Limit grid export to 0 W
Caps how much power may flow to the grid. Set 0 W for zero export — the inverter then absorbs surplus into the battery and curtails solar to avoid feeding in. Useful while energy prices are negative. Requires a meter/CT; keep any other energy manager disconnected from the inverter.
Solis Inverter
Remove grid export limit
Turns the export limit off so the inverter can feed in to the grid normally again.
Solis Inverter
Switch inverter ...
Powers the whole inverter off or on (stops/starts solar, battery and grid exchange). A soft command for convenience — NOT a safety isolation: always use the physical AC/DC isolators and lockout before working on wiring.
Solis Inverter
Report EV charge power 7200 W
Feed your EV charger's live power to the price optimizer so it plans the battery around an active charging session and the two never overpower the grid connection. Trigger this from your charger's (e.g. Zaptec) 'power changed' Flow, passing its power tag.
Solis Inverter
Report grid power -200 W
Feed a whole-home meter reading (+ import / − export) to the self-consumption controller so it can trim battery charging to avoid grid import. The inverter's own meter is blind to house load, so trigger this from your grid meter's (e.g. Tibber Pulse) 'power changed' Flow, passing its power tag.
Solis Inverter
Report house load 600 W
Feed your true house consumption (excluding the EV charger) to the price optimizer as the load signal, instead of the PV/battery/grid-derived estimate. Trigger this from your home energy meter's (e.g. a P1 dongle or a Shelly EM) 'power changed' Flow, passing its power tag. Falls back to the derived load if it goes stale.
Solis Inverter
Limit solar output ...
Throttles solar production down (on) or returns to normal (off) — the same switch as the Limit solar output tile. The inverter holds back its output so it stops pushing power out. Pair it with a whole-home meter in a Flow to curtail only when you're actually exporting (e.g. when prices are negative). Pauses while another energy manager holds the connection.
Solis Inverter
Charge EV to Charge level (%)% within Within hours h
Asks the price optimizer to have the car at the given charge level within the given time. It picks the cheapest/greenest slots to reach the target by the deadline, alongside any scheduled trip and surplus solar charging. Needs the price optimizer configured and the EV charger reachable.
Solis Inverter
Cancel EV charge request
Clears an active manual EV charge request so the optimizer stops working toward it and the charger reverts to its normal behaviour.
Solis Inverter
Fill battery then charge EV to EV charge level (%)%
For a cheap day: the price optimizer grid-charges the home battery to 100%, then starts charging the car to the chosen level. The car is held off until the battery is full so they don't compete for the connection. Stop it any time with the stop action. Needs the price optimizer configured and the EV charger reachable.
Solis Inverter
Stop cheap-day fill
Stops the cheap-day fill campaign (battery then EV) and hands control back to the price optimizer's normal plan.
Support
Har du et problem med denne app? Kontakt udvikleren her.
Hvad er nyt
Version 0.1.58 — New option 'Grid-charge without PV curtailment': when the battery tops up from the grid, your solar now keeps flowing into the battery instead of being throttled. New 'Report house load' Flow card to feed your true home consumption from any energy meter to the price optimizer, so it plans against real load.
Solis Hybrid Inverter
Solis Hybrid Inverter er ikke kompatibel med den valgte Homey.
Solis Hybrid Inverter bliver snart installeret på Homey.
Ændringslog
Vi sender en tak til Remco Bosshard!
Vi lader Remco Bosshard vide, at du elsker appen. Overvej måske at støtte Remco Bosshard ved at give en donation?
Donér til Remco Bosshard
Udvikleren af Solis Hybrid Inverter tager imod donationer.
Giv et bidrag for at sige tak!
Dit forslag er blevet sendt
Vi giver Remco Bosshard besked, når du har sendt et forslag.
Africa
Asia
Europe
Belgium
Deutsch English
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
Finland
Greece
Hungary
Iceland
Ireland
Latvia
Lithuania
Malta
Moldova
The Netherlands
Portugal
Romania
Slovakia
Slovenia
Türkiye
Ukraine
United Kingdom
